中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 35251-2017 垃圾裂化焚烧装置(中英文版) Waste pyrolysis and incineration treatment device |
![]() |
|
![]() |
GB/T 39748.9-2021 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分:称重法测定密度(中英文版) Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density |
![]() |
|
![]() |
GB/T 9118-2010 对焊环带颈松套钢制管法兰(中英文版) Loose hubbed steel pipe flanges with welding neck collor |
![]() |
|
![]() |
GB/T 9647-2015 热塑性塑料管材 环刚度的测定(中英文版) Thermoplastics pipes—Determination of ring stiffness |
![]() |
|
![]() |
GB/T 38969-2020 电力系统技术导则(中英文版) Guide on technology for power system |
![]() |
|
![]() |
GB 3836.12-2008 爆炸性环境 第12部分:气体或蒸气混合物按照其最大试验安全间隙和最小点燃电流的分级(中英文版) Explosive atmospheres - Part 12: Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting current |
![]() |
|
![]() |
GB/T 29791.2-2013 体外诊断医疗器械 制造商提供的信息(标示) 第2部分:专业用体外诊断试剂(中英文版) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use |
![]() |
|
![]() |
GB/T 37891.4-2019 带平键和端键传动的铣刀杆 第4部分:带7:24手动换刀圆锥柄刀杆的尺寸和标记(中英文版) Cutter arbors with parallel key and tenon drive—Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers |
![]() |
|
![]() |
GB/T 25007-2010 速冻食品生产HACCP应用准则(中英文版) Hazard analysis and critical point(HACCP) for application quick-frozen foods |
![]() |
|
![]() |
GB/T 9410-2008 移动通信天线通用技术规范(中英文版) General specification for antennas used in the mobile communications |
![]() |
|
![]() |
GB/T 36194-2018 金鱼造血器官坏死病毒检测方法(中英文版) Detection method of goldfish haematopoietic necrosis virus |
![]() |
|
![]() |
GB 31660.3-2019 食品安全国家标准 水产品中氟乐灵残留量的测定 气相色谱法(中英文版) National Food Safety Standard Determination of Trifluralin Residues in Aquatic Products Gas Chromatography |
![]() |
|
![]() |
GB/T 4506-1984 针尖锋利度和强度试验方法(中英文版) Method for the test of sharpness and strengthof needles tips |
![]() |
|
![]() |
GB/T 28539-2012 眼科光学 接触镜和接触镜护理产品 防腐剂的摄入和释放的测定指南(中英文版) Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for determination of preservative uptake and release |
![]() |
|
![]() |
GB/T 3810.3-2006 陶瓷砖试验方法 第3部分:吸水率、显气孔率、表观相对密度和容重的测定(中英文版) Test method of ceramic tiles Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density |
![]() |
|
![]() |
GB/T 17902.1-1999 信息技术 安全技术 带附录的数字签名 第1部分:概述(中英文版) Information technology--Security techniques--Digital signature with appendix--Part 1:General |
![]() |
|
![]() |
GB/T 34340-2017 燃煤烟气脱硝装备运行效果评价技术要求(中英文版) Technical requirements of operation performance assessment for coal-fired flue gas denitration installation |
![]() |
|
![]() |
GB/Z 41384-2022 M2M业务平台技术要求(中英文版) Technical requirements for M2M service platform |
![]() |
|
![]() |
GB/T 14093.4-2009 机械产品环境技术要求 工业腐蚀环境(中英文版) Environmental technology requirements of machinery products for the industry - Corrosion environments |
![]() |
|
![]() |
GB/T 28876.2-2014 空间实验设备使用材料的可燃性 第2部分:测试方法(中英文版) Flammability of materials in space experimental facilities―Part 2: Test methods |
![]() |
|
![]() |
GB/T 35725-2017 电能质量监测设备自动检测系统通用技术要求(中英文版) General requirements for automatic testing system of power quality monitoring equipment |
![]() |
|
![]() |
GB/T 40473.8-2021 银行业应用系统 非功能需求 第8部分:可维护性(中英文版) Banking application system—Nonfunctional requirement—Part 8: Maintainability |
![]() |
|
![]() |
GB/T 677-2011 化学试剂 乙酸酐(中英文版) Chemical reagent-Acetic anhydride |
![]() |
|
![]() |
GB/T 22236-2008 塑料的检验 检验用塑料制品的粉碎(中英文版) Testing of plastics Size reduction of plastic products for test purposes |
![]() |
|
![]() |
GB/T 7249-2016 白炽灯的最大外形尺寸(中英文版) Maximum lamp outlines for incandescent lamps |
![]() |
|
![]() |
GB 17577-2020 中华人民共和国航行警告标准格式(中英文版) The standard format of navigational warnings in People"s Republic of China |
![]() |
|
![]() |
GB/T 5374-2008 摩托车和轻便摩托车可靠性试验方法(中英文版) Test method of reliability for motorcycles and mopeds |
![]() |
|
![]() |
GB/T 30037-2013 汽车电动天窗总成(中英文版) The assembly of electrical operation sunroof about motor vehicle |
![]() |
|
![]() |
GB/T 7293-2006 饲料添加剂 维生素E粉(中英文版) Feed additive - Vitamin E powder |
![]() |
|
![]() |
GB/T 11798.7-2001 机动车安全检测设备 检定技术条件 第7部分:轴(轮)重仪检定技术条件(中英文版) Motorvehicle safety testing equipment--Technical requirements of verification--Part 7:Technical requirements of verification for Axle(Wheel) load scales |
![]() |
|
![]() |
GB/T 325.4-2015 包装容器 钢桶 第4部分:200L及以下全开口钢桶(中英文版) Packing containers—Steel drums—Part 4:Removable head(open head)drums with a maximum total capacity of 200L |
![]() |
|
![]() |
GB/T 38265.2-2019 软钎剂试验方法 第2部分:不挥发物质含量的测定 沸点法(中英文版) Test methods for soft soldering fluxes—Part 2: Determination of non-volatile matter—Ebulliometric method |
![]() |
|
![]() |
GB/T 25235-2010 粮油机械 组合清理筛(中英文版) Grain and oil machinery - Combined separator |
![]() |
|
![]() |
GB 50143-2018 架空电力线路、变电站(所)对电视差转台、转播台无线电干扰防护间距标准(中英文版) Interval power line, substation (station) for TV differential turntable, relay station radio interference protection spacing standard |
![]() |
|
![]() |
GB 175-2023 通用硅酸盐水泥(中英文版) General Purpose Portland Cement |
![]() |
|
![]() |
GB/T 28913-2012 成人教育培训服务术语(中英文版) Terminology of adult education and training service |
![]() |
|
![]() |
GB/T 15375-2008 金属切削机床 型号编制方法(中英文版) Metal-cutting machine tools - Method of type designation |
![]() |
|
![]() |
GB/T 34861-2017 确定大电机各项损耗的专用试验方法(中英文版) Specific methods for determining separate losses of large machines from tests |
![]() |
|
![]() |
GB/T 18494.3-2023 变流变压器 第3部分:应用导则(中英文版) Converter transformers - Part 3: Guidelines for application |
![]() |
|
![]() |
GB/T 23944-2009 无机化工产品中铝测定的通用方法 铬天青S分光光度法(中英文版) Inorganic chemicals for products use - General method for the determination of aluminium - Chromazurol S-spectrophotometric method |
![]() |
|
![]() |
GB 31617-2014 食品安全国家标准 食品营养强化剂 酪蛋白磷酸肽(中英文版) National Food Safety Standard-Food Nutrition Enhancers Casein Phosphopeptides |
![]() |
|
![]() |
GB/T 12443-2007 金属材料 扭应力疲劳试验方法(中英文版) Metallic materials - Torsional stress fatigue testing method |
![]() |
|
![]() |
GB/T 18791-2002 电子和电气陶瓷性能试验方法(中英文版) Test methods for ceramic properties for electronic and electrical application |
![]() |
|
![]() |
GB/T 1338-1988 小六角扁自锁螺母(中英文版) Self-locking nuts,reduced hexagon oblate |
![]() |
|
![]() |
GB/T 18149-2017 离心泵、混流泵和轴流泵 水力性能试验规范 精密级(中英文版) Centrifugal,mixed flow and axial pumps—Code for hydraulic performance tests—Precision class |
![]() |
|
![]() |
GB/T 41694-2022 安全与韧性 应急管理 危险性设施监测指南(中英文版) Safety and Resilience Emergency Management Guidelines for Monitoring Hazardous Facilities |
![]() |
|
![]() |
GB/T 26728-2011 高效单缸柴油机 技术条件(中英文版) Efficient single cylinder diesel engines - Requirements |
![]() |
|
![]() |
GB/T 19732-2005 缩微摄影技术 透明缩微品阅读器 性能特征(中英文版) Micrographics-Readers for transparent microforms-Performance characteristics |
![]() |
|
![]() |
GB 1886.237-2016 食品安全国家标准 食品添加剂 植酸(又名肌醇六磷酸)(中英文版) National Food Safety Standard - Food Additives - Phytic acid (also known as phytic acid) |
![]() |
|
![]() |
GB/T 27744-2021 异步起动永磁同步电动机技术条件及能效分级(机座号80~355)(中英文版) Specification and energy efficiency grades for line-start permanent magnet synchronous motors(frame size 80~355) |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [70] [71] [72] [73] [74] [75] [76] |