网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 39923-2021
块菌(松露)(中英文版)
Truffle
GB 8821-2011
食品安全国家标准 食品添加剂 β-胡萝卜素(中英文版)
National Food Safety Standard - Food Additive - β-Carotene
GB/T 14074-2006
木材胶粘剂及其树脂检验方法(中英文版)
Testing methods for wood adhesives and their resins
GB/T 18782-2002
调味品中3-氯-1,2-丙二醇的测定(中英文版)
Determination of 3-chloro-1,2-propandiol in condiments
GB/T 32379-2015
矿物棉及其制品甲醛释放量的测定(中英文版)
Determination of mineral wool and its products formaldehyde emission
GB/T 6730.82-2020
铁矿石 钡含量的测定 EDTA滴定法(中英文版)
Iron ores—Determination of barium content—EDTA titrimetric method
GB/T 18090-2008
猪繁殖与呼吸综合征诊断方法(中英文版)
Diagnostic methods of porcine reproductive and respiratory syndrome
GB/T 30314-2013
橡胶或塑料涂覆织物 耐磨性的测定 泰伯法(中英文版)
Rubber-or plastis-coated fabrics—Determination of abrasion resistance—Taber abrader
GB/T 37906-2019
再生水水质 汞的测定 测汞仪法(中英文版)
Reclaimed water quality—Determination of mercury—Mercury analyzer method
GB 25567-2010
食品安全国家标准 食品添加剂 焦磷酸二氢二钠(中英文版)
National Food Safety Standard-Food Additives-Disodium dihydrogen pyrophosphate
GB/T 777-2008
工业自动化仪表用模拟气动信号(中英文版)
Analogue pneumatic signal for industrial-process measurement and control instruments
GB/T 16076-1995
车间空气中环氧氯丙烷的直接进样气相色谱测定方法(中英文版)
Workplace air--Determination of epichlorohydrin--Direct injection gas chromatographic method
GB/T 35020-2018
全断面隧道掘进机 单护盾-土压平衡双模式掘进机(中英文版)
Full face tunnel boring machine—Dual mode(single shield and EPB mode)tunnel boring machine
GB 4789.44-2020
食品安全国家标准 食品微生物学检验 创伤弧菌检验(中英文版)
National food safety standards Food microbiology testing Vibrio vulnificus testing
GB/T 1151-2012
内燃机 主轴瓦及连杆轴瓦 技术条件(中英文版)
Internal combustion engines - Main and connecting rod bearings - Specifications
GB/T 12960-2007
水泥组分的定量测定(中英文版)
Quantitative determination of constituents of cement
GB 8058-2003
陶瓷烹调器铅、镉溶出量允许极限和检测方法(中英文版)
Standard permissible limits and testing method for release of lead or cadmium from ceramic cookware
GB/T 34597-2017
乘用车 防抱制动系统(ABS)直线制动距离 开环试验方法(中英文版)
Passenger cars—Stopping distance at straight-line braking with ABS—Open loop test method
GB/T 41431-2022
家用和类似用途服务机器人 术语和分类(中英文版)
Terminology and classification of household robots and similar services
GB/T 24452-2009
建筑物内排污、废水(高、低温)用氯化聚氯乙烯(PVC-C)管材和管件(中英文版)
Plastics piping systems for soil and waste discharge (low and high temperature)inside buildings - Chlorinated poly(vinyl chloride)(PVC-C)
GB/T 35280-2017
信息安全技术 信息技术产品安全检测机构条件和行为准则(中英文版)
Information security technology—Requirement and code of conduct for security testing bodies of information technology products
GB 40162-2021
饲料加工机械卫生规范(中英文版)
Hygiene specification for feed processing machinery
GB 28150-2011
氯磺隆水分散粒剂(中英文版)
Chlorsulfuron water dispersible granules
GB/T 15663.5-2008
煤矿科技术语 第5部分:提升运输(中英文版)
Terms relating to coal mining - Part 5: Hoisting and transport
GB/T 2900.7-1996
电工术语 电炭(中英文版)
Electrotechnical terminology--Electrical carbon
GB/T 32660.1-2016
金属材料 韦氏硬度试验 第1部分:试验方法(中英文版)
Metallic materials—Webster hardness test—Part 1: Test method
GB/T 39517.1-2020
农林拖拉机和机械 农用定位与导航系统测试规程 第1部分:卫星定位装置的动态测试(中英文版)
Tractors and machinery for agriculture and forestry—Test procedures for positioning and guidance systems in agriculture—Part 1:Dynamic testing of satellite-based positioning devices
GB/T 23267-2009
摩托艇器材使用规范(中英文版)
Motorboat using norm
GB/T 50977-2014
化学工程节水设计规范(中英文版)
Code for design of water saving in chemical engineering
GB/T 21446-2008
用标准孔板流量计测量天然气流量(中英文版)
Measurement of natural gas flow by means of standard orifice meter
GB/T 18932.18-2003
蜂蜜中羟甲基糠醛含量的测定方法 液相色谱-紫外检测法(中英文版)
Method for the determination of hydroxymethylfurfural in honey--HPLC-UV detection method
GB/T 31517-2015
海上风力发电机组 设计要求(中英文版)
Design requirements for offshore wind turbines
GB/T 38281.1-2019
家用和类似用途固定式电气装置的指示灯装置 第1部分:通用要求(中英文版)
Indicator light units for household and similar fixed-electrical installations—Part 1: General requirements
GB/T 14885-2010
固定资产分类与代码(中英文版)
Classification and codes for fixed assets
GB/T 19868.2-2005
基于焊接经验的工艺评定(中英文版)
Welding procedure qualification based on previous welding experience
GB 19112-2003/XG1-2018
《米糠油》国家标准第1号修改单(中英文版)
Rice bran oil
GB/T 17492-2012
工业用金属丝编织网 技术要求和检验(中英文版)
Industrial woven wire cloth - Technical requirements and testing
GB 9706.11-1997
医用电气设备 第二部分:医用诊断X射线源组件和X射线管组件安全专用要求(中英文版)
Medical electrical equipment--Part 2:Particular requirements for the safety ofX-ray source assemblies and X-ray tube assemblies for medical diagnosis
GB/T 20840.6-2017
互感器 第6部分:低功率互感器的补充通用技术要求(中英文版)
Instrument transformers—Part 6:Additional general requirements for low-power instrument transformers
GB/T 42337-2023
公共信用信息报告编制指南(中英文版)
Guidelines for the Preparation of Public Credit Information Reports
GB/T 12764-2009
滚动轴承 无内圈、冲压外圈滚针轴承 外形尺寸和公差(中英文版)
Rolling bearings - Needle roller bearings,drawn cup without inner ring - Boundary dimensions and tolerances
GB/T 19421-2008
层状结晶二硅酸钠试验方法(中英文版)
Test methods of crystalline layered sodium disilicate
GB/T 19657-2005
灯具加热试验用热试验源灯(中英文版)
Heat test source(H.T.S)lamps for carrying out heating tests on luminaires
GB 11530-1989
车间空气中三甲苯磷酸酯卫生标准(中英文版)
Hygienic standard for tricresyl phosphate in the air of workplace
GB/T 33725-2017
表壳体及其附件 耐磨损、划伤和冲击试验(中英文版)
Watch cases and accessories—Tests of the resistance to wear, scratching and impacts
GB/T 22359.2-2022
土方机械与建筑施工机械 内置电源机器的电磁兼容性(EMC) 第2部分:功能安全的EMC附加要求(中英文版)
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with built-in power supply - Part 2: Additional EMC requirements for functional safety
GB/T 28171-2011
嵌入式软件可靠性测试方法(中英文版)
Embedded software reliability testing method
GB/T 3780.21-2006
炭黑 第21部分:橡胶配合剂筛余物的测定 水冲洗法(中英文版)
Carbon black―Part 21:Determination of sieve residue for rubber compounding ingredients―Water washing method
GB 1886.232-2016
食品安全国家标准 食品添加剂 羧甲基纤维素钠(中英文版)
National Food Safety Standard - Food Additives - Sodium Carboxymethyl Cellulose
GB/T 40681.5-2021
生产过程能力和性能监测统计方法 第5部分:计数特性的过程能力和性能估计(中英文版)
Statistical methods in monitoring process capability and performance—Part 5:Process capability estimates and performance for attributive characteristics

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [767] [768] [769] [770] [771] [772] [773]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved