网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 26681-2011
地面数字电视标准测试发射机技术要求和测量方法(中英文版)
Technical requirements and methods of measurement for standard testing transmitter of digital terrestrial television
GB/T 14196.2-2023
白炽灯 安全规范 第2部分:家庭和类似场合普通照明用卤钨灯(中英文版)
Incandescent lamps - Safety regulations - Part 2: Tungsten halogen lamps for general lighting in households and similar places
GB 50281-2006
泡沫灭火系统施工及验收规范(中英文版)
Code for construction and acceptance of foam fire extinguishing systems
GB/T 5271.20-1994
信息技术词汇 20部分 系统开发(中英文版)
Information technology--Vocabulary--Part 20:System development
GB/T 15236-2008
职业安全卫生术语(中英文版)
Occupational safety and health glossary
GB/T 17737.100-2018
同轴通信电缆 第1-100部分:电气试验方法 通用要求(中英文版)
Coaxial communication cables—Part 1-100: Electrical test methods—General requirements
GB/T 42752-2023
区块链和分布式记账技术 参考架构(中英文版)
Blockchain and Distributed Ledger Technology Reference Architecture
GB 29930-2013
食品安全国家标准 食品添加剂 羟丙基淀粉(中英文版)
National Food Safety Standard Food Additive Identification Hydroxypropyl starch
GB/T 33613-2017
三维编织物及其树脂基复合材料拉伸性能试验方法(中英文版)
Test method for tensile properties of 3D braided fabric and its polymer matrix composites
GB/T 25261-2010
建筑用反射隔热涂料(中英文版)
Solar heat reflecting insulation coatings for buildings
GB/T 41738-2022
纤维金属层板I型层间断裂韧性(GIC)试验方法(中英文版)
Test method for mode I interlaminar fracture toughness (GIC) of fiber metal laminates
GB/Z 18461-2001
激光产品的安全 生产者关于激光辐射安全的检查清单(中英文版)
Safety of laser products--Manufacturer’s checklist for radiation safety of laser products
GB 5009.7-2016
食品安全国家标准 食品中还原糖的测定(中英文版)
National Food Safety Standard - Foodstuffs - Determination of reducing sugars in foodstuffs
GB/T 4654-2008
非金属基体红外辐射加热器通用技术条件(中英文版)
The general technical specifications for non-metallic basic body infrared heater
GB/T 40970-2021
化妆品中氨含量的测定 滴定法(中英文版)
Determination of ammonia in cosmetics—Titration method
GB/T 16608.53-2012
有或无机电继电器 第53部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,14mm×9mm底座(中英文版)
Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14mm×9mm base
GB/T 19851.14-2007
中小学体育器材和场地 第14部分:球网(中英文版)
Sports equipment and playground for middle school & primary school - Part 14:Net
GB/T 1875-1995
磷矿石和磷精矿中灼烧失量的测定 重量法(中英文版)
Phosphate rock and concentrate--Determination of loss on ignition--Gravimetric method
GB 1886.166-2015
食品安全国家标准 食品添加剂 γ-庚内酯(中英文版)
National food safety standard — Food additive — γ- lactone Geng
GB/T 24123-2009
电容器用金属化薄膜(中英文版)
Metallized film for capacitors
GB/T 39526-2020
建筑幕墙空气声隔声性能分级及检测方法(中英文版)
Classification and test method for airborne sound insulation performance of curtain wall
GB/T 51086-2015
医药实验工程术语标准(中英文版)
Standard for terminology of pharmaceutical laboratory engineering
GB/T 37421-2019
热喷涂 热喷涂涂层的表征和试验(中英文版)
Thermal spraying—Characterization and testing of thermally sprayed coatings
GB/T 22696.4-2011
电气设备的安全 风险评估和风险降低 第4部分:风险降低(中英文版)
Electrical equipment safety - Risk assessment and risk reduction - Part 4: Risk reduction
GB/T 5856-2024
人造板机械-热压机通用技术条件(中英文版)
Artificial board machinery-General technical conditions for hot presses
GB/T 17562.8-2002
频率低于3 MHz的矩形连接器 第8部分:具有4个信号接触件和电缆屏蔽用接地接触件的连接器详细规范(中英文版)
Rectangular connectors for frequencies below 3MHz--Part 8:Detail specification for connectors,four-signal contacts and earthing contacts for cable screen
GB/T 22831-2008
提花纸板(中英文版)
Jackard board
GB/T 36653-2018
电子级三甲基铝(中英文版)
Electronic grade trimethylaluminium
GB/T 14766-2008
摄影 黑白连续影调相纸 ISO感光度和ISO印相范围的测定(中英文版)
Photography - Black-and-white continuous-tone papers - Determination of ISO speed and ISO range for printing
GB/T 42826-2023
电波钟 信号接收测试方法(中英文版)
Radio controlled clock signal reception test method
GB 3836.13-2013
爆炸性环境 第13部分: 设备的修理、检修、修复和改造(中英文版)
Explosive atmospheres―Part 13: Equipment repair, overhaul and reclamation
GB/T 11800-2008
船用防爆轴流通风机(中英文版)
Marine explosion-proof type axial flow fans
GB 16247-1996
车间空气中氯化锌(烟)卫生标准(中英文版)
Health standard for zinc chloride (fume) in the air of workplace
GB/T 34049-2017
智能流量仪表 通用技术条件(中英文版)
Intelligent flow instruments—General technical requirements
GB/T 19520.17-2010
电子设备机械结构 482.6mm“(19in)系列机械结构尺寸 第3-105部分:1U高度机箱的尺寸和设计要求(中英文版)
Mechanical structures for electronic equipment - Dimension of mechanical structures of the 482.6 mm(19 in)series - Part 3-105: Dimensions and design aspects for 1U high chassis
GB/T 42267-2022
柔性多孔聚合物材料 在潮湿条件下压缩永久变形的测定(中英文版)
Determination of compression set of flexible porous polymeric materials under wet conditions
GB/T 17213.2-2005
工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式(中英文版)
Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions
GB/T 5195.12-2016
萤石 砷含量的测定 原子荧光光谱法(中英文版)
Fluorspar—Determination of arsenic content—Atomic fluorescence spectrometry
GB/T 20833.4-2021
旋转电机 绕组绝缘 第4部分:绝缘电阻和极化指数测量(中英文版)
Rotating electrical machines—The winding insulation—Part 4: Measurement of insulation resistance and polarization index
GB 10287-2012
食品安全国家标准 食品添加剂 松香甘油酯和氢化松香甘油酯(中英文版)
National Food Safety Standard-Rosin glycerides and hydrogenated rosin glycerides
GB/T 4742-1984
日用陶瓷冲击韧性测定方法(中英文版)
Standard test method for lashing toughness ofdomestic ceramic
GB/T 5009.134-2003
大米中禾草敌残留量的测定(中英文版)
Determination of molinate residues in rice
GB 16174.1-2015
手术植入物 有源植入式医疗器械 第1部分:安全、标记和制造商所提供信息的通用要求(中英文版)
Implants for surgery—Active implantable medical devices—Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
GB/T 24241-2009
直接还原铁 热压铁块转鼓和耐磨指数的测定(中英文版)
Direct reduced iron - Determination of the tumble and abrasion indices of hot briquetted iron(HBI)
GB/T 38705-2020
城镇供热设施运行安全信息分类与基本要求(中英文版)
Classification and basic requirements for urban heat supply facilities operation safety information
GB/T 21949.1-2008
数控万能工具铣床 第1部分:精度检验(中英文版)
CNC universal tool milling machines - Part 1: Testing of the accuracy
GB/T 16734-1997
中国主要木材名称(中英文版)
Names of Chinese main woods
GB/T 19967.1-2019
信息技术 通用编码字符集(基本多文种平面) 汉字24点阵字型 第1部分:宋体 (中英文版)
Information technology-Universal coded character set (basic multilingual plane)-24 dot matrix font of Chinese ideogram-Part 1:Song ti
GB/T 14272-2011
羽绒服装(中英文版)
Down garments
GB/T 28478-2024
户外家具-桌椅类通用技术条件(中英文版)
General technical conditions for outdoor furniture - tables and chairs

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [799] [800] [801] [802] [803] [804] [805]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved