中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 35404-2017 基于ebXML的仓储出库指令和通知(中英文版) ebXML based warehousing outbound instruction and notification |
![]() |
|
![]() |
GB/T 40006.3-2021 塑料 再生塑料 第3部分:聚丙烯(PP)材料(中英文版) Plastics—Recycled plastics—Part 3:Polypropylene(PP) materials |
![]() |
|
![]() |
GB/T 22154-2008 国际货运代理服务质量要求(中英文版) Requirement on services of international freight forwarders |
![]() |
|
![]() |
GB/T 18525.1-2001 豆类辐照杀虫工艺(中英文版) Code of good irradiation practice for insect disinfestation of dried pulses |
![]() |
|
![]() |
GB 25571-2011 食品安全国家标准 食品添加剂 活性白土(中英文版) National Food Safety Standard - Food Additive - Activated Clay |
![]() |
|
![]() |
GB/Z 32519.2-2016 1000MW级水轮发电机 第2部分:试验、检验导则(中英文版) 1000MW Class Hydro-generators—Part 2: Testing And Inspecting Guide |
![]() |
|
![]() |
GB/T 20688.1-2007 橡胶支座 第1部分: 隔震橡胶支座试验方法(中英文版) Rubber bearing - Part 1: Seismic-protection isolators test methods |
![]() |
|
![]() |
GB 39177-2020 电压力锅能效限定值及能效等级(中英文版) Minimum allowable values of energy efficiency and energy efficiency grades for electric pressure cookers |
![]() |
|
![]() |
GB/T 18089-2008 蓝舌病病毒分离、鉴定及血清中和抗体检测技术(中英文版) Isolation, identification and serum neutralization antibody test in bluetongue virus |
![]() |
|
![]() |
GB/T 30313-2013 汽车制动系统高温输气橡胶软管及软管组合件(中英文版) High temperature intake air rubber hose and hose assemblies for auto brake system |
![]() |
|
![]() |
GB/T 18442.6-2019 固定式真空绝热深冷压力容器 第6部分:安全防护(中英文版) Static vacuum insulated cryogenic pressure vessels—Part 6:Safety protection |
![]() |
|
![]() |
GB 25566-2010 食品安全国家标准 食品添加剂 三聚磷酸钠(中英文版) National Food Safety Standard-Food Additives-sodium tripolyphosphate |
![]() |
|
![]() |
GB/T 37072-2018 美丽乡村建设评价(中英文版) Evaluation for the construction of beautiful villages |
![]() |
|
![]() |
GB/T 13296-2023 锅炉、热交换器用不锈钢无缝钢管(中英文版) Stainless steel seamless steel pipes for boilers and heat exchangers |
![]() |
|
![]() |
GB/T 4958.11-1988 地面无线电接力系统所用设备的测量方法 第三部分:仿真系统的测量 第三节 黑白和彩色电视传输的测量(中英文版) Methods of measurement for aquipment used in terrestrial radio-relay systems--Part 3:Simulated systems--Section three--Measurements for mono-chrome and colour television transmission |
![]() |
|
![]() |
GB/T 13212-1991 清水荸荠罐头(中英文版) Canned water chestnuts |
![]() |
|
![]() |
GB/T 18950-2003 橡胶和塑料软管 静态下耐紫外线性能测定(中英文版) Rubber and plastics hoses--Determination of ultra-violet resistance under static conditions |
![]() |
|
![]() |
GB/T 1112-2012 键槽铣刀(中英文版) Slot drills |
![]() |
|
![]() |
GB/T 29265.204-2017 信息技术 信息设备资源共享协同服务 第204部分:网关(中英文版) Information technology—Information device intelligent grouping and resource sharing—Part 204:Gateway |
![]() |
|
![]() |
GB/T 21562-2008 轨道交通 可靠性、可用性、可维修性和安全性规范及示例(中英文版) Railway applications - Specification and demonstration of Reliability,Availability, Maintainability and Safety (RAMS) |
![]() |
|
![]() |
GB/T 42351.1-2023 颗粒标准样品的制备 第1部分:基于单分散球形颗粒尖桩栅栏分布的多分散标准样品(中英文版) Preparation of particulate standards Part 1: Polydisperse standards based on picket fence distribution of monodisperse spherical particles |
![]() |
|
![]() |
GB/T 24451-2009 慢回弹软质聚氨酯泡沫塑料(中英文版) Low resilience flexible polyether polyurethane cellular plastics |
![]() |
|
![]() |
GB/T 20027-2005 橡胶或塑料涂覆织物 破裂强度的测定(中英文版) Rubber-or plastics-coated fabrics -- Determiation of bursting strength |
![]() |
|
![]() |
GB 51213-2017 煤炭矿井通信设计规范(中英文版) Code for communication design of coal mine |
![]() |
|
![]() |
GB/T 40507-2021 乘用车 自由转向特性 转向脉冲开环试验方法(中英文版) Passenger cars一Free-steer behaviour一Steering-pulse open-loop test method |
![]() |
|
![]() |
GB 28149-2011 氯磺隆可湿性粉剂(中英文版) Chlorsulfuron wettable powders |
![]() |
|
![]() |
GB/T 32894-2016 抽水蓄能机组工况转换技术导则(中英文版) Technical guide of mode transition for pumped storage unit |
![]() |
|
![]() |
GB/T 40687-2021 物联网 生命体征感知设备通用规范(中英文版) Internet of things—General specification for vital signs sensing devices |
![]() |
|
![]() |
GB/T 23236-2009 数字航空摄影测量 空中三角测量规范(中英文版) Specifications for aerotriangulation of digital aerophotogrammetry |
![]() |
|
![]() |
GB 19288-2003 打火机生产安全规程(中英文版) Safety regulations for lighter production |
![]() |
|
![]() |
GB/T 50976-2014 继电保护及二次回路安装及验收规范(中英文版) Code for installation and acceptance of protection equipment and secondary circuit in infrastructure project |
![]() |
|
![]() |
GB/T 15676-2015 稀土术语(中英文版) Terms for rare earths |
![]() |
|
![]() |
GB/T 15063-2020 复合肥料(中英文版) Compound fertilizer |
![]() |
|
![]() |
GB/T 533-2008 硫化橡胶或热塑性橡胶 密度的测定(中英文版) Rubber,vulcanized or thermoplastic - Determination of density |
![]() |
|
![]() |
GB/T 25968-2010 分光光度计测量材料的太阳透射比和太阳吸收比试验方法(中英文版) Test methods of solar transmittance and solar absorptance of materials by spectrophotometry |
![]() |
|
![]() |
GB/T 14825-2006 农药悬浮率测定方法(中英文版) Determination method for suspensibility of pesticides |
![]() |
|
![]() |
GB/T 36949-2018 双端LED灯(替换直管形荧光灯用)-性能要求(中英文版) Double-capped LED lamps designed to retrofit liner fluorescent lamps—Performance specifications |
![]() |
|
![]() |
GB/T 43598-2023 纳米技术 石墨烯粉体氧含量和碳氧比的测定 X射线光电子能谱法(中英文版) Nanotechnology Determination of oxygen content and carbon-to-oxygen ratio of graphene powder X-ray photoelectron spectroscopy |
![]() |
|
![]() |
GB/T 17432-2012 变形铝及铝合金化学成分分析取样方法(中英文版) Methods of sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys |
![]() |
|
![]() |
GB/T 35999.3-2018 食品质量控制前提方案 第3部分:农场(中英文版) Prerequisite programmes on food safety—Part 3: Farming |
![]() |
|
![]() |
GB/T 42610-2023 高压氢气瓶塑料内胆和氢气相容性试验方法(中英文版) Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder |
![]() |
|
![]() |
GB/T 24617-2009 冷冻食品物流包装、标志、运输和储存(中英文版) Packaging, labeling, transport and storage for frozen foods in logistics |
![]() |
|
![]() |
GB/T 6324.2-2004 有机化工产品试验方法 第2部分:挥发性有机液体水浴上蒸发后干残渣的测定(中英文版) Test method of organic chemical products--Part 2:Determination of dry residue after evaporation on a water bath for volatile organic liquids |
![]() |
|
![]() |
GB/T 33939-2017 立式辊磨机 磨辊与磨盘铸造衬板 技术条件(中英文版) Vertical roller mill—Casting liner of the grinding roller and the grinding table—Requirement |
![]() |
|
![]() |
GB/T 18663.5-2022 电子设备机械结构 公制系列和英制系列的试验 第5部分:机箱、插箱和插件的地震试验(中英文版) Mechanical construction of electronic equipment - Tests for metric and imperial series - Part 5: Seismic tests for enclosures, subracks and inserts |
![]() |
|
![]() |
GB/T 14897.5-1994 木工刀具术语 方凿钻(中英文版) Tools for woodworking--Square chisel drill--Termi-nology |
![]() |
|
![]() |
GB/T 18856.3-2008 水煤浆试验方法 第3部分: 筛分试验(中英文版) Test methods for coal water mixture - Part 3: Sieving method |
![]() |
|
![]() |
GB/T 28170.1-2011 信息技术 计算机图形和图像处理 可扩展三维组件(X3D) 第1部分:体系结构和基础组件(中英文版) Information technology - Computer graphics and image processing - Extensible 3D (X3D)- Part 1: Architecture and base component |
![]() |
|
![]() |
GB/T 32995-2016 电磁屏蔽玻璃(中英文版) Electromagnetic shielding glass |
![]() |
|
![]() |
GB/T 6730.5-2007 铁矿石 全铁含量的测定 三氯化钛还原法(中英文版) Iron ores - Determination of total iron content - Titanium(III) chloride reduction method |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [807] [808] [809] [810] [811] [812] [813] |