中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 5779.3-2000 紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求(中英文版) Fasteners--Surface discontinuities--Bolts,screws and studs for special requirements |
![]() |
|
![]() |
GB/T 29088-2012 金属和合金的腐蚀 双环电化学动电位再活化测量方法(中英文版) Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method |
![]() |
|
![]() |
GB/T 50558-2019 水泥工厂环境保护设施设计标准(中英文版) Standard for design of environmental protection facilities of cement plant |
![]() |
|
![]() |
GB/T 4194-1984 钨丝蠕变试验、高温处理及金相检查方法(中英文版) Creep testing,high temperature treatment and metallographic examination of the tungsten wires |
![]() |
|
![]() |
GB/T 11759-2008 牛皮(中英文版) Raw cattle hides and skins |
![]() |
|
![]() |
GB/T 24629-2009 外科植入物 矫形外科植入物维护和操作指南(中英文版) Implants for surgery - Guidance on care and handling of orthopaedic implants |
![]() |
|
![]() |
GB/T 17186.2-2018 管法兰连接计算方法 第2部分:基于泄漏率的计算方法(中英文版) Calculation methods for the pipe flange joints—Part 2:Calculation method satisfies leakage rate |
![]() |
|
![]() |
GB/T 21071-2007 仓储服务质量要求(中英文版) Requirement for warehousing service quality |
![]() |
|
![]() |
GB 31604.1-2023 食品安全国家标准 食品接触材料及制品迁移试验通则(中英文版) National Food Safety Standards General Principles for Migration Testing of Food Contact Materials and Products |
![]() |
|
![]() |
GB/T 11303-1989 电子设备用C 类预调可变电容器空白详细规范(中英文版) Blank detail specification for variable preset capacitors type C in electronic equipments |
![]() |
|
![]() |
GB/T 11490-2011 彩色显像管管基尺寸(中英文版) Dimensions of base for color picture tubes |
![]() |
|
![]() |
GB/T 34991-2017 基于12.5kHz信道的时分多址(TDMA)专用数字集群通信系统 空中接口物理层及数据链路层技术规范(中英文版) 12.5kHz TDMA channel based professional digital trunking communication system—Technical specifications for physical layer and data link layer of air interface |
![]() |
|
![]() |
GB/T 41505-2022 电子信息制造企业绿色供应链管理规范(中英文版) Green supply chain management specification for electronic information manufacturing enterprises |
![]() |
|
![]() |
GB/T 3468-1983 检索期刊编辑总则(中英文版) General editorial rule for retrieval periodicals |
![]() |
|
![]() |
GB/T 23364.2-2009 高纯氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法(中英文版) Methods for chemical analysis of high purity indium oxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry |
![]() |
|
![]() |
GB/T 18527.1-2001 苹果辐照保鲜工艺(中英文版) Code of good irradiation practice for apples |
![]() |
|
![]() |
GB/T 6564.1-2014 内六角花形圆柱头自挤螺钉(中英文版) Hexalobular socket head cap thread rolling screws |
![]() |
|
![]() |
GB/T 5982-2017 脱粒机 试验方法(中英文版) Thresher—Testing method |
![]() |
|
![]() |
GB/T 20473-2021 建筑保温砂浆(中英文版) Dry-mixed thermal insulating mortar for buildings |
![]() |
|
![]() |
GB 25907.5-2010 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第5部分:如克白体(中英文版) Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font -Part 5: Ruki lean |
![]() |
|
![]() |
GB/T 32705-2016 实验室仪器及设备安全规范 仪用电源(中英文版) Safety requirements for laboratory instrument and equipment—Power supply for instrument and equipment |
![]() |
|
![]() |
GB/T 36450.2-2021 信息技术 存储管理 第2部分:通用架构(中英文版) Information technology—Storage management—Part 2: Common architecture |
![]() |
|
![]() |
GB 4407.1-2008 经济作物种子 第1部分:纤维类(中英文版) Seed of economic crops - Part 1:Fibre species |
![]() |
|
![]() |
GB/T 29533-2013 钢质模锻件材料消耗工艺定额编制方法(中英文版) Compiling method of technological norm for steel die forging material consumption |
![]() |
|
![]() |
GB/T 12496.8-2015 木质活性炭试验方法 碘吸附值的测定(中英文版) Test methods of wooden activated carbon—Determination of iodine number |
![]() |
|
![]() |
GB 13078.2-2006 饲料卫生标准 饲料中赭曲霉毒素A和玉米赤霉烯酮的允许量(中英文版) Hygienical standard for in feeds Toleration of ochratoxin A and zearalenone in feeds |
![]() |
|
![]() |
GB/T 17989.2-2020 控制图 第2部分:常规控制图(中英文版) Control charts--Part 2: Shewhart control charts |
![]() |
|
![]() |
GB/T 858-1988 圆螺母用止动垫圈(中英文版) Tab washers for round nut |
![]() |
|
![]() |
GB/T 24817.3-2009 起重机械 控制装置布置形式和特性 第3部分:塔式起重机(中英文版) Cranes - Controls - Layout and characteristics - Part 3: Tower cranes |
![]() |
|
![]() |
GB 18956-2003 木工机床安全 平压两用刨床(中英文版) Safety of woodworking machines--Surface planing and thicknessing machines |
![]() |
|
![]() |
GB/T 22861-2018 精粗梳交织及半精梳毛织品(中英文版) Worsted yarn interweave with woollen yarn fabric and semi-worsted fabric |
![]() |
|
![]() |
GB/T 22437.2-2023 起重机 载荷与载荷组合的设计原则 第2部分:流动式起重机(中英文版) Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes |
![]() |
|
![]() |
GB 50736-2012 民用建筑供暖通风与空气调节设计规范(中英文版) Design code for heating ventilation and air conditioning of civil buildings |
![]() |
|
![]() |
GB/T 35900.3-2018 动物流感检测 第3部分:H1和H3亚型流感病毒核酸双重荧光RT-PCR检测方法(中英文版) Animal influenza detection—Part 3: Method of duplex real-time RT-PCR for the detection of H1 and H3 subtype influenza virus |
![]() |
|
![]() |
GB/T 4937.31-2023 半导体器件 机械和气候试验方法 第31部分:塑封器件的易燃性(内部引起的)(中英文版) Semiconductor devices - Methods of mechanical and climatic tests - Part 31: Flammability of plastic encapsulated devices (internal origin) |
![]() |
|
![]() |
GB/T 2497-2008 船用柴油机增压空气冷却器(中英文版) Charge air coolers for marine diesel engines |
![]() |
|
![]() |
GB/T 22838.9-2009 卷烟和滤棒物理性能的测定 第9部分:卷烟空头(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 9: Cigarettes loose end |
![]() |
|
![]() |
GB/T 12636-1990 微波介质基片复介电常数带状线测试方法(中英文版) Stripline test method for complexpermittivity of microwave dielectric substrates |
![]() |
|
![]() |
GB 15092.3-2014 器具开关 第2部分:转换选择器的特殊要求(中英文版) Switches for appliances―Part 2: Particular requirements for change-over selectors |
![]() |
|
![]() |
GB/T 33574-2017 集装箱生产序列号编码(中英文版) Coding of freight containers manufacturer’s serial number |
![]() |
|
![]() |
GB/T 4201-2006 平衡机的描述检验与评定(中英文版) Description, verification and evaluation of balancing machines |
![]() |
|
![]() |
GB/T 30834-2022 钢中非金属夹杂物的评定和统计 扫描电镜法(中英文版) Evaluation and statistics of non-metallic inclusions in steel - Scanning electron microscopy |
![]() |
|
![]() |
GB/Z 26157.10-2010 测量和控制数字数据通信 工业控制系统用现场总线 类型2:ControlNet和EtherNet/IP规范 第10部分:对象库(中英文版) Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Type 2: ControlNet and EtherNet/IP specification - Part 10: Object library |
![]() |
|
![]() |
GB/T 8320-2003 铜钨及银钨电触头(中英文版) Copper-tungsten and silver-tungsten electrical contacts |
![]() |
|
![]() |
GB/T 33040-2016 热处理木材鉴别方法(中英文版) Identification method of heat-treated wood |
![]() |
|
![]() |
GB/T 5356-2021 内六角扳手(中英文版) Hexagon socket screw keys |
![]() |
|
![]() |
GB/T 22451-2008 无线通信设备电磁兼容性通用要求(中英文版) Common requirements of electromagnetic compatibility for radio communication equipment |
![]() |
|
![]() |
GB 29686-2013 食品安全国家标准 猪可食性组织中阿维拉霉素残留量的测定 液相色谱-串联质谱法(中英文版) National Food Safety Standard-Determination of Avilamycin Residues in Pig Edible Tissues by Liquid Chromatography - Tandem Mass Spectrometry |
![]() |
|
![]() |
GB 1886.36-2015 食品安全国家标准 食品添加剂 留兰香油(中英文版) National Food Safety Standard-Food Additives-Spearmint oil |
![]() |
|
![]() |
GB/T 26958.28-2020 产品几何技术规范(GPS) 滤波 第28部分: 轮廓滤波器 端部效应(中英文版) Geometrical product specifications (GPS)—Filtration—Part 28: Profile filters:End effects |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [908] [909] [910] [911] [912] [913] [914] |