中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 22264.5-2022 安装式数字显示电测量仪表 第5部分:相位表和功率因数表的特殊要求(中英文版) Installed electrical measuring instruments with digital display - Part 5: Particular requirements for phase meters and power factor meters |
![]() |
|
![]() |
GB/T 28095-2011 木层孔褐根腐病菌检疫鉴定方法(中英文版) Detection and identification of Phellinus noxius (Corner) G. Cunn. |
![]() |
|
![]() |
GB/T 35381.5-2017 农林拖拉机和机械 串行控制和通信数据网络 第5部分:网络管理(中英文版) Tractors and machinery for agriculture and forestry—Serial control and communications data network—Part 5:Network management |
![]() |
|
![]() |
GB/T 6165-2021 高效空气过滤器性能试验方法 效率和阻力(中英文版) Test method of the performance of high efficiency particulate air filter—Efficiency and resistance |
![]() |
|
![]() |
GB/T 23312.6-2009 漆包铝圆绕组线 第6部分:180级聚酯或聚酯亚胺/聚酰胺复合漆包铝圆线(中英文版) Enamelled round aluminium winding wire - Part 6: Polyester or polyesterimide overcoated with polyamide enamelled round aluminium wire, class 180 |
![]() |
|
![]() |
GB/T 18569.1-2001 机械安全 减小由机械排放的危害性物质对健康的风险 第1部分:用于机械制造商的原则和规范(中英文版) Safety of machinery--Reduction of risks to health from hazardous substances emitted by machinery--Part 1:Principles and specifications for machinery manufacturers |
![]() |
|
![]() |
GB/T 19519-2014 架空线路绝缘子 标称电压高于1 000 V交流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则(中英文版) Insulators for overhead lines―Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000V―Definitions, test methods and acceptance criteria |
![]() |
|
![]() |
GB/T 32432-2015 家用钢制锅具(中英文版) Domestic steel cookware |
![]() |
|
![]() |
GB/T 38696.2-2020 眼面部防护 强光源(非激光)防护镜 第2部分:使用指南(中英文版) Eye and face protection—Intense light sources(non-laser) protector—Part 2: Guidance for use |
![]() |
|
![]() |
GB/T 4857.3-2008 包装 运输包装件基本试验 第3部分:静载荷堆码试验方法(中英文版) Packaging - Basic tests for transport packages - Part 3:Stacking test methods using a static load |
![]() |
|
![]() |
GB/T 3098.1-2010 紧固件机械性能 螺栓、螺钉和螺柱(中英文版) Mechanical properties of fasteners - Bolts,screws and studs |
![]() |
|
![]() |
GB/T 20460-2006 橡胶配合剂 天然碳酸钙 试验方法(中英文版) Rubber compounding ingredients―Natural calcium carbonate―Test methods |
![]() |
|
![]() |
GB/T 37951-2019 微通道板试验方法(中英文版) Test methods for microchannel plate |
![]() |
|
![]() |
GB 16219-1996 车间空气中三氯甲烷卫生标准(中英文版) Health standard for trichlormethane in the air of workplace |
![]() |
|
![]() |
GB/T 4325.9-2013 钼化学分析方法 第9部分:镍量的测定 丁二酮肟分光光度法和火焰原子吸收光谱法(中英文版) Methods for chemical analysis of molybdenum - Part 9: Determination of nickel content - Dimethylglyoxime spectrophotometry and flame atomic absorption spectrometry |
![]() |
|
![]() |
GB/T 19557.30-2018 植物品种特异性、一致性和稳定性测试指南 梨(中英文版) Guidelines for the conduct of tests for distinctness, uniformity and stability—Pear(Pyrus spp.) |
![]() |
|
![]() |
GB 1886.351-2021 食品安全国家标准 食品添加剂 α-环状糊精(中英文版) National Food Safety Standard Food Additive α-Cyclodextrin |
![]() |
|
![]() |
GB/T 24793-2009 摄影 加工废液 银含量的测定(中英文版) Photography - Processing wastes - Determination of silver content |
![]() |
|
![]() |
GB/T 18959-2003 木材保管规程(中英文版) Specification of wood protection in storage |
![]() |
|
![]() |
GB 34461-2017 饲料添加剂 L-肉碱(中英文版) Feed additive—L-carnitine |
![]() |
|
![]() |
GB/T 41481-2022 道路车辆 零部件和系统的清洁度(中英文版) Road vehicles - Cleanliness of components and systems |
![]() |
|
![]() |
GB/T 12729.4-2008 香辛料和调味品 磨碎细度的测定(手筛法)(中英文版) Spices and condiments - Determination of degree of fineness of grinding - Hand sieving method |
![]() |
|
![]() |
GB/T 27978-2011 水泥生产原料中废渣用量的测定方法(中英文版) Determination of the waste content in the raw mix of cement |
![]() |
|
![]() |
GB/T 8914-1988 居住区大气中汞卫生标准检验方法 金汞齐富集-原子吸收法(中英文版) Hygienic determination method of mercury in air of residential areas--Gold amalgamation-atomicabsorption spectrometric method |
![]() |
|
![]() |
GB/T 12759-1991 双圆弧圆柱齿轮基本齿廓(中英文版) Double-circular-arc tooth profile of basic rack for cylindrical gears |
![]() |
|
![]() |
GB/T 35110-2017 海相页岩气勘探目标优选方法(中英文版) Target optimization methods for marine shale gas exploration |
![]() |
|
![]() |
GB/T 7927-2007 手扶拖拉机 振动测量方法(中英文版) Method of vibration measurement for walking tractors |
![]() |
|
![]() |
GB/T 40500-2021 喷气燃料中芳烃总量的测定 气相色谱法(中英文版) Determination of total aromatics composition in aviation fuels—Gas chromatography |
![]() |
|
![]() |
GB/T 16695-1996 造船 球鼻艏和侧推器符号(中英文版) Shipbuilding--Bulbous bow and side thruster symbols |
![]() |
|
![]() |
GB/T 5080.7-1986 设备可靠性试验 恒定失效率假设下的失效率与平均无故障时间的验证试验方案(中英文版) Equipment reliability testing--Compliance test plans for failure rate and mean time between failures assuming constant failure rate |
![]() |
|
![]() |
GB/T 23468-2009 坠落防护装备安全使用规范(中英文版) Code of practice for safety use of fall protection equipments |
![]() |
|
![]() |
GB/T 30976.1-2014 工业控制系统信息安全 第1部分:评估规范(中英文版) Industrial control system security―Part 1: Assessment specification |
![]() |
|
![]() |
GB/T 32710.2-2016 环境试验仪器及设备安全规范 第2部分:低温恒温循环装置(中英文版) Safety requirements for environmental testing and conditioning equipment—Part 2: Refrigerated circulators |
![]() |
|
![]() |
GB 55005-2021 木结构通用规范(中英文版) General code for timber structures |
![]() |
|
![]() |
GB/T 26261-2010 旧通信设备鉴定通用技术要求(中英文版) General technical requirements of used telecommunication equipment appraisal |
![]() |
|
![]() |
GB 16565-2003 油炸小食品卫生标准(中英文版) Hygienic standard for fried food |
![]() |
|
![]() |
GB/T 31593.8-2015 消防安全工程 第8部分:开口气流的计算要求(中英文版) Fire safety engineering—Part 8: Requirements governing algebraic equations for vent flow |
![]() |
|
![]() |
GB/T 38324-2019 健康信息学 中医药学语言系统语义网络框架(中英文版) Health informatics—Semantic network framework of traditional Chinese medicine language system |
![]() |
|
![]() |
GB/T 18851.3-2008 无损检测 渗透检测 第3部分:参考试块(中英文版) Non-destructive testing - Penetrant testing - Part 3: Reference test blocks |
![]() |
|
![]() |
GB/T 13748.10-2013 镁及镁合金化学分析方法 第10部分:硅含量的测定 钼蓝分光光度法(中英文版) Chemical analysis methods of magnesium and magnesium alloys - Part 10:Determination of silicon content - Molybdenum blue spectrophotometric method |
![]() |
|
![]() |
GB/T 37600.1-2018 全国主要产品分类-产品类别核心元数据-第1部分:描述方法(中英文版) National central product classification—Product category core metadata—Part 1:Description rules |
![]() |
|
![]() |
GB/T 5187-2008 铜及铜合金箔材(中英文版) Foil of copper and copper alloy |
![]() |
|
![]() |
GB/T 5072-2023 耐火材料 常温耐压强度试验方法(中英文版) Refractory materials - Normal temperature compressive strength test method |
![]() |
|
![]() |
GB/T 17125-1997 农业拖拉机和机具 四点刚性挂接装置 技术规范(中英文版) Agricultural tractors andimplements--Four-point rigid hitch--Specifications |
![]() |
|
![]() |
GB/T 50602-2010 球形储罐γ射线全景曝光现场检测标准(中英文版) Radiographic testing standard for a single exposure with γ-ray technique of spherical tank installation |
![]() |
|
![]() |
GB 9706.27-2005 医用电气设备 第2部分:输液泵和输液控制器安全专用要求(中英文版) Medical eletrical equipment Part2:Particular requirements for the safety of infusion pumps and controllers |
![]() |
|
![]() |
GB/T 29265.1-2017 信息技术 信息设备资源共享协同服务 第1部分:系统结构与参考模型(中英文版) Information technology—Information device intelligent grouping and resource sharing—Part 1: Architecture and reference model |
![]() |
|
![]() |
GB/T 42467.6-2023 中医临床名词术语 第6部分:妇科学(中英文版) Clinical Terminology of Traditional Chinese Medicine Part 6: Gynecology |
![]() |
|
![]() |
GB 50766-2012 水电水利工程压力钢管制作安装及验收规范(中英文版) Code for manufacture installation and acceptance of steel penstocks in hydroelectric and hydraulic engineering |
![]() |
|
![]() |
GB/T 19488.1-2004 电子政务数据元 第1部分:设计和管理规范(中英文版) Data elements for e-government--Part 1:Specification for design and management |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [914] [915] [916] [917] [918] [919] [920] |