中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 1510-2016 锰矿石 铝含量的测定 EDTA滴定法(中英文版) Manganese ores—Determination of aluminium content—EDTA titrimetric method |
![]() |
|
![]() |
GB/T 40608-2021 电网设备模型参数和运行方式数据技术要求(中英文版) Technical requirements for equipment parameters and operating data of power grid |
![]() |
|
![]() |
GB/T 9217.8-2005 硬质合金旋转锉 第8部分:火炬形旋转锉(H型)(中英文版) Hardmetal burrs--Part 8:Flame burrs(style H) |
![]() |
|
![]() |
GB/T 27763-2011 声学 评价工作间声学性能的空间声场分布曲线的测量方法及参量表述(中英文版) Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
![]() |
|
![]() |
GB/T 31990.1-2015 塑料光纤电力信息传输系统技术规范 第1部分:技术要求(中英文版) Technical specification for electric power information transmission system on plastic optical fiber—Part 1: Technical requirements |
![]() |
|
![]() |
GB/T 28799.2-2020 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分:管材(中英文版) Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 2: Pipes |
![]() |
|
![]() |
GB/T 11705-2009 船用电动三螺杆泵试验方法(中英文版) Test method for marine electric three-spindle screw pump |
![]() |
|
![]() |
GB/T 14790.2-2014 机械振动 人体暴露于手传振动的测量与评价 第2部分:工作场所测量实用指南(中英文版) Mechanical vibration―Measurement and evaluation of human exposure to hand-transmitted vibration―Part 2: Practical guidance for measurement at the workplace |
![]() |
|
![]() |
GB/T 18310.22-2003 纤维光学互连器件和无源器件 基本试验和测量程序 第2-22部分:试验 温度变化(中英文版) Fibre optic interconnecting devices and passive components--Basic test andmeasurement procedures--Part 2-22:Tests--Change of temperature |
![]() |
|
![]() |
GB/T 2423.62-2018 环境试验-第2部分:试验方法-试验Fx和导则:多输入多输出振动(中英文版) Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test |
![]() |
|
![]() |
GB/T 19247.6-2024 印制板组装-第6部分:球栅阵列(BGA)和盘栅阵列(LGA)焊点空洞的评估要求及测试方法(中英文版) Quality control methods for magnetic resonance imaging/spectroscopy |
![]() |
|
![]() |
GB/T 25885-2010 羊毛纤维平均直径及其分布试验方法 激光扫描仪法(中英文版) Measurement of the mean and distribution of fibre diameter for wool - The laserscan fiber diameter analyser |
![]() |
|
![]() |
GB/T 3654.2-2008 铌铁 铜含量的测定 新亚铜灵 三氯甲烷萃取光度法(中英文版) Ferroniobium - Determination of copper content - The neocuproine-choroform extraction photometric method |
![]() |
|
![]() |
GB/T 14366-1993 声学 职业噪声测量与噪声引起的听力损伤评价(中英文版) Acoustics--Determination ofoccupational noise exposure and estimation of noise-induced hearing impairment |
![]() |
|
![]() |
GB/T 35915-2018 化妆品用原料 珍珠提取物(中英文版) Cosmetic ingredients—Extract of pearl |
![]() |
|
![]() |
GB/T 13747.10-1992 锆及锆合金化学分析方法 硫氰酸盐分光光度法测定钨量(中英文版) Zirconium and zirconium alloys--Determination of tungsten content--Thiocyanate spectrophotometric method |
![]() |
|
![]() |
GB/T 42623-2023 安装于办公、旅馆和住宅建筑的乘客电梯的配置和选择(中英文版) Configuration and selection of passenger elevators installed in office, hotel and residential buildings |
![]() |
|
![]() |
GB/T 20390.2-2006 纺织品 床上用品燃烧性能 第2部分:小火焰为点火源的可点燃性试验方法(中英文版) Textiles―Burning behaviour of bedding items―Part 2: Test methods for the ignitability by a small open flame |
![]() |
|
![]() |
GB/T 3884.8-2012 铜精矿化学分析方法 第8部分:锌量的测定 Na2EDTA滴定法(中英文版) Methods for chemical analysis of copper concentrates - Part 8: Determination of zinc content - Na2EDTA titration method |
![]() |
|
![]() |
GB/T 33946-2017 电磁推射装置用铜合金型、棒材(中英文版) Copper alloy profile,bar for the electromagnetic launch assembly |
![]() |
|
![]() |
GB/T 42125.19-2022 测量、控制和实验室用电气设备的安全要求 第19部分:电动控制阀门执行器的特殊要求(中英文版) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves |
![]() |
|
![]() |
GB 10152-2009 B型超声诊断设备(中英文版) B mode ultrasonic diagnostic equipment |
![]() |
|
![]() |
GB/T 51190-2016 海底电力电缆输电工程设计规范(中英文版) Code for design of submarine power cable project |
![]() |
|
![]() |
GB 19593-2004 烟花爆竹 组合烟花(中英文版) Fireworks and firecracker--Combination fireworks |
![]() |
|
![]() |
GB/T 41033-2021 CMOS集成电路抗辐射加固设计要求(中英文版) Design requirements of radiation hardening for CMOS IC |
![]() |
|
![]() |
GB/T 27997-2011 造船门式起重机(中英文版) Shipbuilding gantry crane |
![]() |
|
![]() |
GB/T 1458-2008 纤维缠绕增强塑料环形试样力学性能试验方法(中英文版) Test method for mechanical properties of ring of filament-winding reinforced plastics |
![]() |
|
![]() |
GB/T 51147-2015 硝胺类废水处理设施技术规范(中英文版) Technical code for wastewater treatment facilities from nitroamine explosives |
![]() |
|
![]() |
GB/T 15131.1-1994 信息处理 数据交换用130 mm改进调频制记录的位密度为13262 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能(中英文版) Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad,on 80 tracks on each side--Part 1:Dimensional, physical and magnetic characteristics |
![]() |
|
![]() |
GB/T 38446-2020 微机电系统(MEMS)技术 带状薄膜抗拉性能的试验方法(中英文版) Micro-electromechanical system technology—Test methods for tensile property measurement of strip thin films |
![]() |
|
![]() |
GB/T 17350-2009 专用汽车和专用挂车术语、代号和编制方法(中英文版) Terms marks and designation for special purpose vehicles and special trailers |
![]() |
|
![]() |
GB/T 20910-2007 热水系统用温度压力安全阀(中英文版) Temperature/pressure safety valve for hot water supply system |
![]() |
|
![]() |
GB/T 17540-1998 台式激光打印机通用规范(中英文版) General specification for desktop laser printer |
![]() |
|
![]() |
GB/T 1616-2014 工业过氧化氢(中英文版) Hydrogen peroxide for industrial use |
![]() |
|
![]() |
GB 37480-2019 低环境温度空气源热泵(冷水)机组能效限定值及能效等级(中英文版) Minimum allowable values of energy efficiency and energy efficiency grades for low ambient temperature air source heat pumps(water chiller) packages |
![]() |
|
![]() |
GB/T 13930-2024 水环真空泵和水环压缩机-气量测定方法(中英文版) Water ring vacuum pumps and water ring compressors-Methods for determination of gas volume |
![]() |
|
![]() |
GB/T 16656.505-2010 工业自动化系统与集成 产品数据表达与交换 第505部分:应用解释构造:图样结构与管理(中英文版) Industrial automation systems and integration - Product data representation and exchange - Part 505: Application interpreted construct: Drawing structure and administration |
![]() |
|
![]() |
GB/Z 36442.3-2018 信息技术 用于物品管理的射频识别 实现指南 第3部分:超高频RFID读写器系统在物流应用中的实现和操作(中英文版) Information technology—Radio frequency identification for item management—Implementation guidelines—Part 3: Implementation and operation of UHF RFID interrogators system in logistics applications |
![]() |
|
![]() |
GB/T 20688.4-2023 橡胶支座 第4部分:普通橡胶支座(中英文版) Rubber Bearings Part 4: Ordinary Rubber Bearings |
![]() |
|
![]() |
GB/T 29493.8-2013 纺织染整助剂中有害物质的测定 第8部分:聚丙烯酸酯类产品中残留单体的测定(中英文版) Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 8: Determination of residual monomers in polyacrylate |
![]() |
|
![]() |
GB 19212.1-2008 电力变压器、电源、电抗器和类似产品的安全 第1部分:通用要求和试验(中英文版) Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests |
![]() |
|
![]() |
GB/T 34167-2017 黄金矿业术语(中英文版) Gold mining industry terminology |
![]() |
|
![]() |
GB/T 15733-1995 金融电子化基本术语(中英文版) The basic terminology of financial computerization |
![]() |
|
![]() |
GB 5749-2022 生活饮用水卫生标准(中英文版) Standards for drinking water quality |
![]() |
|
![]() |
GB 4789.35-2010 食品安全国家标准 食品微生物学检验 乳酸菌检验(中英文版) National Food Safety Standard-Food microbiology - Examination of lactic acid bacteria |
![]() |
|
![]() |
GB 18447.1-2008 拖拉机 安全要求 第1部分:轮式拖拉机(中英文版) Safety requirements for tractors - Part 1:Wheeled tractors |
![]() |
|
![]() |
GB/T 4437.1-2000 铝及铝合金热挤压管 第一部分:无缝圆管(中英文版) Aluminium and aluminium alloy extruded tubes--Part 1:Seamless tubes |
![]() |
|
![]() |
GB/T 4797.2-2017 环境条件分类 自然环境条件 气压(中英文版) Classification of environmental conditions—Environmental conditions appearing in nature—Air pressure |
![]() |
|
![]() |
GB/T 39992-2021 感官分析 方法学 平衡不完全区组设计(中英文版) Sensory analysis—Methodology—Balanced incomplete block designs |
![]() |
|
![]() |
GB 4717-2005 火灾报警控制器(中英文版) Fire Alarm Control Units |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [975] [976] [977] [978] [979] [980] [981] |