网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 30491.2-2024
天然气-热力学性质计算-第2部分:扩展应用范围的单相(气相、液相和稠密相)流体性质(中英文版)
Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase (gas, liquid and dense phase) fluid properties with extended application range
GB/T 28177.2-2011
识别卡 柔性薄卡 第2部分:磁记录技术(中英文版)
Identification cards - Thin flexible cards - Part 2: Magnetic recording technique
GB/T 11618.1-2008
铜管接头 第1部分:钎焊式管件(中英文版)
Pipe fittings of copper and copper alloys - Part 1: Fittings of braze welding type
GB/T 5519-2018
谷物与豆类 千粒重的测定(中英文版)
Cereals and pulses—Determination of the mass of 1000 grains
GB/T 19981.3-2009
纺织品 织物和服装的专业维护、干洗和湿洗 第3部分:使用烃类溶剂干洗和整烫时性能试验的程序(中英文版)
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvent
GB/T 21132-2007
烟草及烟草制品 二硫代氨基甲酸酯农药残留量的测定 分子吸收光度法(中英文版)
Tobacco and tobacco products - Determination of dithiocarbamate pesticides residues - Molecular absorption spectrometric method
GB/T 42525-2023
微滤膜除菌过滤系统技术规范(中英文版)
Technical Specifications for Microfiltration Membrane Sterilization and Filtration System
GB/T 18290.4-2000
无焊连接 第4部分:不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则(中英文版)
Solderless connections--Part 4:Solderless non-accessible insulation displacement connections--General requirements,test methods and practical guidance
GB/T 30815-2014
表面化学分析 分析样品的制备和安装方法指南(中英文版)
Surface chemical analysis―Guidelines for preparation and mounting of specimens for analysis
GB/T 2670.1-2017
内六角花形盘头自攻螺钉(中英文版)
Hexalobular socket pan head tapping screws
GB/T 26332.5-2022
光学和光子学 光学薄膜 第5部分:减反射膜基本要求(中英文版)
Optics and photonics - Optical films - Part 5: Basic requirements for antireflection coatings
GB 25892.5-2010
信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 32点阵字型 第5部分:如克白体(中英文版)
Information technology - Uyghur, Kazak, Kirgiz coded character set - 32 Dot matrix font - Part 5: Ruki lean
GB 4806.7-2016
食品安全国家标准 食品接触用塑料材料及制品(中英文版)
National Food Safety Standard- Plastic Materials and Articles used in Food-contact
GB/T 17215.691-2021
电测量数据交换? DLMS/COSEM组件? 第91部分:使用Web服务经COSEM访问服务(CAS)访问DLMS/COSEM服务器的通信配置(中英文版)
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 91: Communication profile using web-services to access a DLMS/COSEM server via a COSEM Access Service (CAS)
GB/T 29549.3-2013
海上石油固定平台模块钻机 第3部分:海上安装、调试与验收(中英文版)
Specification for offshore modular drillling rigs on fixed platforms - Part 3:Hook-up,commissioning,and acceptance
GB/T 6974.7-1986
起重机械名词术语 铁路起重机(中英文版)
Lifting appliances--Vocabulary--Railway cranes
GB 1886.61-2015
食品安全国家标准 食品添加剂 红花黄(中英文版)
National Food Safety Standard-Food Additives-Safflower yellow
GB/T 51410-2020
建筑防火封堵应用技术标准(中英文版)
Technical standard for application of firestop in buildings
GB/T 24771-2009
工业用叔丁胺(中英文版)
Tert-Butylamine for industrial use
GB 21657-2008
橡胶加工炼胶车间防尘规程(中英文版)
Code of dust control in the compounding workshop of the rubber manufacture
GB/T 13931-2002
电除尘器 性能测试方法(中英文版)
Methods of performance tests for electrostatic precipitators
GB 16670-2006
柜式气体灭火装置(中英文版)
Cabinet gas fire extinguishing equipment
GB/T 11300-1989
电子设备用A 类调谐可变电容器空白详细规范(中英文版)
Blank detail specification for variable tuning capacitors type A in electronic equipments
GB/T 708-2019
冷轧钢板和钢带的尺寸、外形、重量及允许偏差(中英文版)
Dimension,shape,weight and tolerance for cold-rolled steel strip and sheet
GB/T 23561.1-2024
煤和岩石物理力学性质测定方法-第1部分:采样一般规定(中英文版)
Methods for determination of physical and mechanical properties of coal and rock - Part 1: General provisions for sampling
GB 11640-2011
铝合金无缝气瓶(中英文版)
Seamless aluminum alloy gas cylinders
GB/T 14235.1-1993
熔模铸造模料 熔点测定方法(冷却曲线法)(中英文版)
Testing method for melting point of pattern materials in investment casting
GB/T 36668.1-2018
游乐设施状态监测与故障诊断 第1部分:总则(中英文版)
Condition monitoring and fault diagnostics of amusement device—Part 1: General requirements
GB/T 23563.3-2009
冲模滚动导向钢板模架 第3部分:中间导柱模架(中英文版)
Ball-bearing guide steel-plate die sets of stamping dies - Part 3: Center-pillar die sets
GB/T 15371-2023
往复式内燃机 曲轴轴系扭转振动评定方法(中英文版)
Reciprocating internal combustion engine - Evaluation method for torsional vibration of crankshaft shafting
GB/T 26930.9-2014
原铝生产用炭素材料 煤沥青 第9部分:氧弹燃烧法测定硫含量(中英文版)
Carbonaceous materials used in the production of aluminium―Pitch for electrodes―Part 9:Determination of sulful content by the bomb method
GB/T 5195.1-2017
萤石 氟化钙含量的测定 EDTA滴定法和蒸馏-电位滴定法(中英文版)
Fluorspar—Determination of calcium fluoride content—EDTA titration method and distillation-potentiometric titration method
GB/T 42284.5-2022
道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第5部分:化学负荷(中英文版)
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 5: Chemical loads
GB/T 26356-2010
旅游购物场所服务质量要求(中英文版)
The requirements of service quality in tourist shopping spot
GB/T 11847-2008
二氧化铀粉末比表面积测定 BET容量法(中英文版)
Determination of specific surface area of uranium dioxide powder by BET capacity method
GB/T 5014-2003
弹性柱销联轴器(中英文版)
Pin coupling elastomer
GB 16487.2-2017
进口可用作原料的固体废物环境保护控制标准—冶炼渣(中英文版)
Environmental protection control standard for imported solid wastes as raw materials—Smelt slag
GB/T 9149-2008
磁粉离合器通用技术条件(中英文版)
General specification for magnetic particle clutch
GB/T 20805-2006
饲料中酸性洗涤木质素(ADL)的测定(中英文版)
Determination of acid detergent lignin in feedstuffs
GB/T 19924-2021
流动式起重机 稳定性的确定(中英文版)
Mobile cranes-Determination of stability
GB 50897-2013
装饰石材工厂设计规范(中英文版)
Code for design of decorative stone plant
GB/T 3036-1994
船用中心型蝶阀(中英文版)
Marine center-pivoted butterfly valves
GB 23200.1-2016
食品安全国家标准 除草剂残留量检测方法第1部分:气相色谱-质谱法测定 粮谷及油籽中酰胺类除草剂残留量(中英文版)
National food safety standards—Determination of acetanilide herbicide residues in cereals and oil seeds Gas chromatography-mass spectrometry
GB/T 38829-2020
IPTV媒体交付系统技术要求 内容接入(中英文版)
Technical requirements for IPTV media delivery system—Content access
GB/T 24949-2010
船舶和海上技术 船用电磁罗经(中英文版)
Ships and marine technology - Marine electromagnetic compasses
GB/T 37985-2019
机动车电子标识密钥管理系统技术要求(中英文版)
Technical requirements for key management system for the elictronic identification of motor vehicle
GB 18075.1-2012
交通运输设备制造业卫生防护距离 第1部分:汽车制造业(中英文版)
Health protection zone for manufacturing industry of transportation facilities - Part 1:Automobile industry
GB/T 9091-2008
感应分压器(中英文版)
Inductive voltage dividers
GB/T 12690.13-2003
稀土金属及其氧化物中非稀土杂质化学分析方法 钼、钨量的测定 电感耦合等离子体发射光谱法和电感耦合等离子体质谱法(中英文版)
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 35098-2018
微束分析 透射电子显微术 植物病毒形态学的透射电子显微镜鉴定方法(中英文版)
Microbeam analysis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [984] [985] [986] [987] [988] [989] [990]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved