China Determination of for GB Standards Search Result

and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .


	GB/T 3286.12-2023 Methods for chemical analysis of limestone and dolomite Part 12: Determination of potassium oxide and sodium oxide content Flame atomic absorption spectrometry 石灰石及白云石化学分析方法第12部分：氧化钾和氧化钠含量的测定火焰原子吸收光谱法 - 中英文版
	GB/T 20405.1-2023 Urine absorbent for incontinence Polyacrylate super absorbent powder Part 1: Determination of pH value 失禁者用尿液吸收剂聚丙烯酸酯高吸水性粉末第1部分：pH值的测定方法 - 中英文版
	GB/T 43098.2-2023 Analysis methods for water treatment agents Part 2: Determination of arsenic, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS) 水处理剂分析方法第2部分：砷、汞、镉、铬、铅、镍、铜含量的测定电感耦合等离子体质谱法(ICP-MS) - 中英文版
	GB/T 23948-2023 Inorganic chemical products - general method for determination of water-insoluble matter 无机化工产品水不溶物测定通用方法 - 中英文版
	GB/T 23947.3-2023 General method for determination of arsenic in inorganic chemical products Part 3: Atomic fluorescence spectrometry 无机化工产品中砷测定的通用方法第3部分：原子荧光光谱法 - 中英文版
	GB/T 17530.2-2023 Test methods for industrial acrylic acid and esters Part 2: Determination of organic impurities and purity of industrial acrylic acid esters Gas chromatography 工业丙烯酸及酯的试验方法第2部分：工业用丙烯酸酯有机杂质及纯度的测定气相色谱法 - 中英文版
	GB/T 3394-2023 Determination of trace amounts of carbon monoxide, carbon dioxide and acetylene in ethylene and propylene for industrial use - Gas chromatography 工业用乙烯、丙烯中微量一氧化碳、二氧化碳和乙炔的测定气相色谱法 - 中英文版
	GB/T 3392-2023 Determination of hydrocarbon impurities in propylene for industrial use - Gas chromatography 工业用丙烯中烃类杂质的测定气相色谱法 - 中英文版
	GB/T 43316.5-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method 塑料耐环境应力开裂(ESC)的测定第5部分:恒定拉伸变形法 - 中英文版
	GB 31660.9-2019 National food safety standards - Determination of ethoxycarbamate residues in edible poultry tissues - High performance liquid chromatography 食品安全国家标准家禽可食性组织中乙氧酰胺苯甲酯残留量的测定高效液相色谱法 - 中英文版
	GB 23200.117-2019 National food safety standards Determination of copper quinoline residues in plant-derived foods High performance liquid chromatography 食品安全国家标准植物源性食品中喹啉铜残留量的测定高效液相色谱法 - 中英文版
	GB/T 6324.12-2023 Test methods for organic chemical products Part 12: Determination of trace amounts of mercury in organic liquid chemical products Atomic fluorescence method 有机化工产品试验方法第12部分：有机液体化工产品微量汞的测定原子荧光法 - 中英文版
	GB/T 43220-2023 Method for determination of arsenic in solid biomass fuels 固体生物质燃料中砷的测定方法 - 中英文版
	GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving 软木粒机械筛分测定粒度的试验方法 - 中英文版
	GB/T 43184-2023 Method for determination of moisture content of cork raw materials 软木原料含水率测定方法 - 中英文版
	GB/T 43179-2023 Method for determination of insoluble matter of pesticide N,N-dimethylformamide 农药N,N-二甲基甲酰胺不溶物测定方法 - 中英文版
	GB/T 43174-2023 Method for determination of adhesion of pesticide seed treatment preparations 农药种子处理制剂附着性测定方法 - 中英文版
	GB/T 43117-2023 Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions 玻璃纤维增强热固性塑料（GRP）管湿态或干态条件下环蠕变性能的测定 - 中英文版
	GB/T 43098.1-2023 Methods for analysis of water treatment agents Part 1: Determination of phosphorus content 水处理剂分析方法第1部分：磷含量的测定 - 中英文版
	GB/T 43088-2023 Microbeam analysis Analytical electron microscopy Method for determination of dislocation density in metallic thin crystal specimens 微束分析分析电子显微术金属薄晶体试样中位错密度的测定方法 - 中英文版
	GB/T 43085-2023 Plastics Polymer dispersions Determination of free formaldehyde content 塑料聚合物分散体游离甲醛含量的测定 - 中英文版
	GB/T 43016-2023 Artificial Leather Test Methods for Synthetic Leather Determination and Evaluation of Surface Wrinkles 人造革合成革试验方法表面褶皱的测定和评价 - 中英文版
	GB/T 42998-2023 Method for determination of prohibited and restricted substances in furniture products and their materials Aldehydes and ketones 家具产品及其材料中禁限用物质测定方法醛酮类化合物 - 中英文版
	GB/T 23944-2023 General method for determination of aluminum in inorganic chemical products Chromium Azur S spectrophotometry 无机化工产品中铝测定的通用方法铬天青S分光光度法 - 中英文版
	GB/T 18950-2023 Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. 橡胶和塑料软管实验室光源暴露试验法颜色、外观和其他物理性能变化的测定 - 中英文版
	GB/T 18882.1-2023 Methods for chemical analysis of mixed rare earth oxides of ionic rare earth ores - Part 1: Determination of the proportions of fifteen rare earth element oxides 离子型稀土矿混合稀土氧化物化学分析方法第1部分：十五个稀土元素氧化物配分量的测定 - 中英文版
	GB/T 14825-2023 Method for determination of pesticide suspension rate 农药悬浮率测定方法 - 中英文版
	GB/T 6730.85-2023 Iron ore - Preparation and determination of certified standard samples for chemical analysis 铁矿石化学分析用有证标准样品的制备和定值 - 中英文版
	GB/T 11064.9-2023 Methods for chemical analysis of lithium carbonate, lithium hydroxide monohydrate, and lithium chloride Part 9: Determination of sulfate content Barium sulfate turbidity method 碳酸锂、单水氢氧化锂、氯化锂化学分析方法第9部分：硫酸根含量的测定硫酸钡浊度法 - 中英文版
	GB/T 8151.26-2023 Methods for chemical analysis of zinc concentrates Part 26: Determination of silver content Acid dissolution-flame atomic absorption spectrometry 锌精矿化学分析方法第 26 部分：银含量的测定酸溶解-火焰原子吸收光谱法 - 中英文版
	GB/T 6609.35-2023 Methods for chemical analysis and determination of physical properties of alumina Part 35: Determination of specific surface area Nitrogen adsorption method 氧化铝化学分析方法和物理性能测定方法第35部分：比表面积的测定氮吸附法 - 中英文版
	GB/T 6609.27-2023 Methods for chemical analysis and determination of physical properties of alumina - Part 27: Particle size analysis - Sieving method 氧化铝化学分析方法和物理性能测定方法第27部分：粒度分析筛分法 - 中英文版
	GB/T 6609.25-2023 Methods for chemical analysis and determination of physical properties of alumina - Part 25: Determination of loose and tapped density 氧化铝化学分析方法和物理性能测定方法第25部分：松装和振实密度的测定 - 中英文版
	GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates Part 15: Determination of bismuth content Hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry 钨精矿化学分析方法第15部分：铋含量的测定氢化物发生原子荧光光谱法和火焰原子吸收光谱法 - 中英文版
	GB/T 6150.12-2023 Methods for chemical analysis of tungsten concentrates Part 12: Determination of silica content Silicon-molybdenum blue spectrophotometry and gravimetric method 钨精矿化学分析方法第12部分：二氧化硅含量的测定硅钼蓝分光光度法和重量法 - 中英文版
	GB/T 6150.10-2023 Methods for chemical analysis of tungsten concentrates Part 10: Determination of lead content Hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry 钨精矿化学分析方法第10部分：铅含量的测定氢化物发生原子荧光光谱法和火焰原子吸收光谱法 - 中英文版
	GB/T 6150.8-2023 Methods for chemical analysis of tungsten concentrates Part 8: Determination of molybdenum content Thiocyanate spectrophotometry 钨精矿化学分析方法第8部分：钼含量的测定硫氰酸盐分光光度法 - 中英文版
	GB/T 6150.6-2023 Methods for chemical analysis of tungsten concentrates Part 6: Determination of wet water content Gravimetric method 钨精矿化学分析方法第6部分：湿存水含量的测定重量法 - 中英文版
	GB/T 6150.4-2023 Chemical analysis methods for tungsten concentrates Part 4: Determination of sulfur content High-frequency induction infrared absorption method and combustion-iodometric method 钨精矿化学分析方法第4部分：硫含量的测定高频感应红外吸收法和燃烧-碘量法 - 中英文版
	GB/T 3884.12-2023 Methods for chemical analysis of copper concentrates Part 12: Determination of fluorine and chlorine content Ion chromatography and potentiometric titration 铜精矿化学分析方法第12部分：氟和氯含量的测定离子色谱法和电位滴定法 - 中英文版
	GB/T 35306-2023 Determination of carbon and oxygen content in silicon single crystal Low-temperature Fourier transform infrared spectroscopy 硅单晶中碳、氧含量的测定低温傅立叶变换红外光谱法 - 中英文版
	GB/T 42903-2023 Metallic materials—Method for determination of creep crack and creep-fatigue crack growth rates 金属材料蠕变裂纹及蠕变-疲劳裂纹扩展速率测定方法 - 中英文版
	GB/T 42923-2023 Glass fiber reinforced plastic products Determination of fiber length 玻璃纤维增强塑料制品纤维长度的测定 - 中英文版
	GB/T 17421.2-2023 General Principles for Machine Tool Inspection Part 2: Determination of Positioning Accuracy and Repeatable Positioning Accuracy of CNC Axis 机床检验通则第2部分：数控轴线的定位精度和重复定位精度的确定 - 中英文版
	GB/T 5758-2023 Method for determination of particle size, effective particle size and uniformity coefficient of ion exchange resin 离子交换树脂粒度、有效粒径和均一系数的测定方法 - 中英文版
	GB/T 8094-2023 Harvesting machinery—Combine harvesters—Determination of grain tank capacity and performance of grain unloading mechanism 收获机械联合收割机粮箱容量及卸粮机构性能的测定 - 中英文版
	GB/T 15000.3-2023 Working guidelines for standard samples - Part 3: Standard samples - Determination and evaluation of homogeneity and stability 标准样品工作导则第3部分：标准样品定值和均匀性与稳定性评估 - 中英文版
	GB/T 9452-2023 Method for determination of effective heating zone of heat treatment furnace 热处理炉有效加热区测定方法 - 中英文版
	GB/T 8358-2023 Steel wire rope - Determination method of breaking force 钢丝绳破断拉力测定方法 - 中英文版
	GB/T 42513.1-2023 Methods for chemical analysis of nickel alloys - Part 1: Determination of chromium content - Ferrous ammonium sulfate potentiometric titration method 镍合金化学分析方法第1部分：铬含量的测定硫酸亚铁铵电位滴定法 - 中英文版

Find out:2720Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55