China Polyethylene (PE) pi GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 2951.42-2008 Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi 电缆和光缆绝缘和护套材料通用试验方法 第42部分：聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增 - 中英文版 |
 |
|
|
|
GB/T 22051-2008 Cold-expansion fittings with sliding compression-sleeves for cross-linked polyethylene(PE-X) pipe 交联聚乙烯(PE-X)管用滑紧卡套冷扩式管件 - 中英文版 |
|
|
|
|
GB/T 20674.2-2006 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 - 中英文版 |
|
|
|
|
GB/T 20674.1-2006 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 - 中英文版 |
|
|
|
|
GB/T 20201-2006 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes 灌溉用聚乙烯(PE)压力管机械连接管件 - 中英文版 |
|
|
|
|
GB/T 15819-2006 Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 - 中英文版 |
|
|
|
|
GB/T 19796-2005 Agricultural irrigation equipment-Plastics saddles for polyethylene pressure pipes 农业灌溉设备 聚乙烯承压管用塑料鞍座 - 中英文版 |
|
|
|
|
GB 15558.2-2005 Buried Polyethylene(PE)piping systems for the supply of gaseous fuels Part 2:Fittings 燃气用埋地聚乙烯(PE)管道系统 第2部分:管件 - 中英文版 |
|
|
|
|
GB/T 19810-2005 Polyethylene(PE)pipe and fittings-Determination of the tensile strength and failure mode of test pieces from a butt-fused joint 聚乙烯(PE)管材和管件 热熔对接接头 拉伸强度和破坏形式的测定 - 中英文版 |
|
|
|
|
GB/T 19809-2005 Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 - 中英文版 |
|
|
|
|
GB/T 19808-2005 Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 - 中英文版 |
|
|
|
|
GB/T 19807-2005 Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 - 中英文版 |
|
|
|
|
GB/T 19806-2005 Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验 - 中英文版 |
|
|
|
|
GB/T 13663.2-2005 Polyethylene(PE)pipings systems for water supply Part 2:Fittings 给水用聚乙烯(PE)管道系统 第2部分:管件 - 中英文版 |
|
|
|
|
GB/T 19712-2005 Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 - 中英文版 |
|
|
|
|
GB/T 19472.2-2004 Polyethylene structure-wall piping system for underground usage--Part 2:Polyethylene spirally enwound structure-wall pipes 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材 - 中英文版 |
|
|
|
|
GB/T 19472.1-2004 Polyethylene structure wall pipeline system for underground usage--Part 1:Polyethylene double wall corrugated pipes 埋地用聚乙烯(PE)结构壁管道系统 第1部分:聚乙烯双壁波纹管材 - 中英文版 |
|
|
|
|
GB 15558.1-2003 Buried polyethylene(PE)piping systems for the supply of gaseous fuels--Part 1:Pipes 燃气用埋地聚乙烯(PE)管道系统 第1部分:管材 - 中英文版 |
|
|
|
|
GB/T 19279-2003 Polyethylene pipes--Resistance to slow crack growth--Cone test method 聚乙烯管材 耐慢速裂纹增长 锥体试验方法 - 中英文版 |
|
|
|
|
GB/T 18997.2-2003 Polyethylene/Aluminum/Polyethylene composite pressure pipe--Part 2:PE/AL/PE pipe butt-welded by aluminum pipe 铝塑复合压力管 第2部分:铝管对接焊式铝塑管 - 中英文版 |
|
|
|
|
GB/T 18997.1-2003 Polyethylene/Aluminum/Polyethylene composite pressure pipe--Part 1:PE/AL/PE pipe overlap-welded by aluminum pipe 铝塑复合压力管 第1部分:铝管搭接焊式铝塑管 - 中英文版 |
|
|
|
|
GB/T 18992.2-2003 Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--Part 2: Pipes 冷热水用交联聚乙烯(PE-X)管道系统 第2部分:管材 - 中英文版 |
|
|
|
|
GB/T 18992.1-2003 Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--Part 1: General 冷热水用交联聚乙烯(PE-X)管道系统 第1部分:总则 - 中英文版 |
|
|
|
|
GB/T 18474-2001 Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content 交联聚乙烯(PE-X)管材与管件 交联度的试验方法 - 中英文版 |
|
|
|
|
GB/T 13663-2000 Polyethylene pipes for water supply 给水用聚乙烯(PE)管材 - 中英文版 |
|
|
|
|
GB/T 17391-1998 Test method for thermal stability of polyethylene pipes and fittings 聚乙烯管材与管件热稳定性试验方法 - 中英文版 |
|
|
|
|
GB/T 15820-1995 Test of resistance to pull out ofjoints between polyethylene (PE) pressure pipes and fittings 聚乙烯压力管材与管件连接的耐拉拔试验 - 中英文版 |
|
|
|
|
GB/T 13021-1991 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis 聚乙烯管材和管件炭黑含量的测定 热失重法 - 中英文版 |
|
| Find out:78Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
