China Steel - Determinatio GB Standards Search Result |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
GB/T 8358-2014 Steel wire ropes―Determination of measured breaking force 钢丝绳 实际破断拉力测定方法 - 中英文版 |
|||
GB/T 5753-2013 Steel cord conveyor belts―Methods for the determination of total thickness and cover thickness 钢丝绳芯输送带 总厚度和覆盖层厚度的测定方法 - 中英文版 |
|||
GB/T 4335-2013 Determination of ferrite grain size for cold rolled low carbon steel sheets 低碳钢冷轧薄板铁素体晶粒度测定法 - 中英文版 |
|||
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 - 中英文版 |
|||
GB/T 223.65-2012 Steel, iron and alloy - Determination of cobalt content - Flame atomic absorption spectrometric method 钢铁及合金 钴含量的测定 火焰原子吸收光谱法 - 中英文版 |
|||
GB/T 24520-2009 Cast iron and low alloy steel - Determination of lanthanum, cerium and magnesium content - Inductively coupled plasma atomic emission spectrometric method 铸铁和低合金钢 镧、铈和镁含量的测定 电感耦合等离子体原子发射光谱法 - 中英文版 |
|||
GB/T 24514-2009 Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry 钢表面锌基和(或)铝基镀层 单位面积镀层质量和化学成分测定 重量法、电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法 - 中英文版 |
|||
GB/T 223.86-2009 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace 钢铁及合金 总碳含量的测定 感应炉燃烧后红外吸收法 - 中英文版 |
|||
GB/T 223.85-2009 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace 钢铁及合金 硫含量的测定 感应炉燃烧后红外吸收法 - 中英文版 |
|||
GB/T 223.84-2009 Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method 钢铁及合金 钛含量的测定 二安替比林甲烷分光光度法 - 中英文版 |
|||
GB/T 223.83-2009 Steel and iron - Determination of high sulfur content - Infrared absorption method after combustion in an induction furnace 钢铁及合金 高硫含量的测定 感应炉燃烧后红外吸收法 - 中英文版 |
|||
GB/T 24191-2009 Steel wire ropes - Determination of the actual modulus of elasticity 钢丝绳 实际弹性模量测定方法 - 中英文版 |
|||
GB/T 24174-2009 Steel - Determination of Bake-Hardening-Index (BH2) 钢 烘烤硬化值(BH2)的测定方法 - 中英文版 |
|||
GB/T 18570.2-2009 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分:清理过的表面上氯化物的实验室测定 - 中英文版 |
|||
GB/T 18570.11-2009 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法 - 中英文版 |
|||
GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法 - 中英文版 |
|||
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法 - 中英文版 |
|||
GB/T 22368-2008 Low-alloy steel - Determination of multi-element contents - Glow discharge optical emission spectrometry(Routine method) 低合金钢 多元素含量的测定 辉光放电原子发射光谱法(常规法) - 中英文版 |
|||
GB/T 223.11-2008 Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method 钢铁及合金 铬含量的测定 可视滴定或电位滴定法 - 中英文版 |
|||
GB/T 11170-2008 Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) 不锈钢 多元素含量的测定 火花放电原子发射光谱法(常规法) - 中英文版 |
|||
GB/T 223.59-2008 Iron,steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method 钢铁及合金 磷含量的测定 铋磷钼蓝分光光度法和锑磷钼蓝分光光度法 - 中英文版 |
|||
GB/T 223.5-2008 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method 钢铁 酸溶硅和全硅含量的测定 还原型硅钼酸盐分光光度法 - 中英文版 |
|||
GB/T 10417-2008 Specifications for steel-bonded tungsten carbides and determination of its transverse rupture strength, impact toughness and hardness 碳化钨钢结硬质合金技术条件及其力学性能的测试方法 - 中英文版 |
|||
GB/T 224-2008 Determination of depth of decarburization of steels 钢的脱碳层深度测定法 - 中英文版 |
|||
GB/T 223.4-2008 Alloyed steel - Determination of manganese content - Potentiometric or visual titration method 钢铁及合金 锰含量的测定 电位滴定或可视滴定法 - 中英文版 |
|||
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products 钢产品镀锌层质量试验方法 - 中英文版 |
|||
GB/T 13452.4-2008 Paints and varnishes - Determination of resistance to filiform corrosion on steel 色漆和清漆 钢铁表面上涂膜的耐丝状腐蚀试验 - 中英文版 |
|||
GB/T 223.9-2008 Iron, steel and alloy - Determination of aluminium content - Chrom azurol S photometric method 钢铁及合金 铝含量的测定 铬天青S分光光度法 - 中英文版 |
|||
GB/T 223.75-2008 Iron,steel and alloy - Determination of boron content - Methanol distillation-curcumin photometric method 钢铁及合金 硼含量的测定 甲醇蒸馏-姜黄素光度法 - 中英文版 |
|||
GB/T 223.73-2008 Iron, steel and alloy - Determination of iron contents - Titanium trichloride-potassium dichromate titration method 钢铁及合金 铁含量的测定 三氯化钛-重铬酸钾滴定法 - 中英文版 |
|||
GB/T 223.72-2008 Iron, steel and alloy - Determination of sulfur content - Gravimetric method 钢铁及合金 硫含量的测定 重量法 - 中英文版 |
|||
GB/T 223.70-2008 Iron, steel and alloy - Determination of iron contents - O-phenanthroline spectrophotometric method 钢铁及合金 铁含量的测定 邻二氮杂菲分光光度法 - 中英文版 |
|||
GB/T 223.69-2008 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace 钢铁及合金 碳含量的测定 管式炉内燃烧后气体容量法 - 中英文版 |
|||
GB/T 223.67-2008 Iron, steel and alloy - Determination of sulfur content -Methylene blue spectrophotometric method 钢铁及合金 硫含量的测定 次甲基蓝分光光度法 - 中英文版 |
|||
GB/T 223.64-2008 Iron, steel and alloyed - Determination of manganese content - Flame atomic absorption spectrometric method 钢铁及合金 锰含量的测定 火焰原子吸收光谱法 - 中英文版 |
|||
GB/T 223.55-2008 Iron, steel and alloy - Determination of tellurium content - Oscillo-polarographic method 钢铁及合金 碲含量的测定 示波极谱法 - 中英文版 |
|||
GB/T 223.43-2008 Iron, steel and alloy - Determination of tungsten content - Gravimetryc method and spectrophotometric method 钢铁及合金 钨含量的测定 重量法和分光光度法 - 中英文版 |
|||
GB/T 223.31-2008 Iron, steel and alloy - Determination of arsenic content -Distillation-molybdenum blue spectrophotometric method 钢铁及合金 砷含量的测定 蒸馏分离-钼蓝分光光度法 - 中英文版 |
|||
GB/T 223.29-2008 Iron, steel and alloy - Determination of lead content - Carrier precipitation-xylenol orange spectrophotometric method 钢铁及合金 铅含量的测定 载体沉淀-二甲酚橙分光光度法 - 中英文版 |
|||
GB/T 223.26-2008 Iron, steel and alloy - Determination of molybdenum content - The thiocyanate spectrophotometric method 钢铁及合金 钼含量的测定 硫氰酸盐分光光度法 - 中英文版 |
|||
GB/T 223.23-2008 Iron, steel and alloy - Determination of nickel content - The dimethylglyoxime spectrophotometric method 钢铁及合金 镍含量的测定 丁二酮肟分光光度法 - 中英文版 |
|||
GB/T 21834-2008 Medium and low alloy steel - Determination of the distribution of multi-element contents - Original position statistic distribution analysis method 中低合金钢 多元素成分分布的测定 金属原位统计分布分析法 - 中英文版 |
|||
GB/T 18570.12-2008 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第12部分: 水溶性铁离子的现场滴定测定法 - 中英文版 |
|||
GB/T 223.82-2007 Steel and iron - Determination of hydrogen content - Inert gas impulse fusion heat conductivity method 钢铁 氢含量的测定 惰气脉冲熔融热导法 - 中英文版 |
|||
GB/T 223.81-2007 Iron, steel and alloy - Determination of total aluminum and total boron contents - Microwave digestion - inductively coupled plasma mass spectrometric method 钢铁及合金 总铝和总硼含量的测定 微波消解-电感耦合等离子体质谱法 - 中英文版 |
|||
GB/T 223.80-2007 Iron,steel and alloy - Determination of trace bismuth and arsenic contents - Hydride generation - atomic fluorescence spectrometric method 钢铁及合金 铋和砷含量的测定 氢化物发生-原子荧光光谱法 - 中英文版 |
|||
GB/T 223.79-2007 Iron and steel - Determination of multi - element contents - X - ray fluorescence spectrometry (Routine method) 钢铁 多元素含量的测定 X-射线荧光光谱法(常规法) - 中英文版 |
|||
GB/T 223.40-2007 Iron, steel and alloy - Determination of niobium content - The sulphochlorophenol S spectrophotometric method 钢铁及合金 铌含量的测定 氯磺酚S分光光度法 - 中英文版 |
|||
GB/T 20127.9-2006 Steel and alloy - Determination of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method 钢铁及合金 痕量元素的测定 第9部分:电感耦合等离子体发射光谱法测定钪含量 - 中英文版 |
|||
GB/T 20127.8-2006 Steel and alloy - Determination of trace element contents Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method 钢铁及合金 痕量元素的测定 第8部分:氢化物发生-原子荧光光谱法测定锑含量 - 中英文版 |
Find out:178Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |