China Test conditions of p GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/Z 6113.405-2010 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods 无线电骚扰和抗扰度测量设备和测量方法规范 第4-5部分：不确定度、统计学和限值建模替换试验方法的使用条件 - 中英文版 |
 |
|
|
|
GB/T 25480-2010 Basic environmental conditions and testing methods for transportation and storage of instruments 仪器仪表运输、贮存基本环境条件及试验方法 - 中英文版 |
|
|
|
|
GB/T 25615-2010 Earth-moving machinery - Determination of emission sound pressure level at operator’s position - Dynamic test conditions 土方机械 司机位置发射声压级的测定 动态试验条件 - 中英文版 |
|
|
|
|
GB/T 25614-2010 Earth-moving machinery - Determination of sound power level - Dynamic test conditions 土方机械 声功率级的测定 动态试验条件 - 中英文版 |
|
|
|
|
GB/T 25613-2010 Earth-moving machinery - Determination of emission sound pressure level at operator’s position - Stationary test conditions 土方机械 司机位置发射声压级的测定 定置试验条件 - 中英文版 |
|
|
|
|
GB/T 25612-2010 Earth-moving machinery - Determination of sound power level - Stationary test conditions 土方机械 声功率级的测定 定置试验条件 - 中英文版 |
|
|
|
|
GB/T 8190.9-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 - 中英文版 |
|
|
|
|
GB/T 8190.10-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分：压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 - 中英文版 |
|
|
|
|
GB/T 18400.7-2010 Test conditions for machining centres - Part 7: Accuracy of a finished test piece 加工中心检验条件 第7部分：精加工试件精度检验 - 中英文版 |
|
|
|
|
GB/T 18400.5-2010 Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets 加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验 - 中英文版 |
|
|
|
|
GB/T 18400.4-2010 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 - 中英文版 |
|
|
|
|
GB/T 24195-2009 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, “dry” and “wet” conditions 金属和合金的腐蚀 酸性盐雾、“干燥”和“湿润”条件下的循环加速腐蚀试验 - 中英文版 |
|
|
|
|
GB/T 23582.1-2009 Test conditions for vertical turning and boring lathes - Testing of the accuracy - Part 1: Single and double column vertical turning and boring lathes 立式车床检验条件 精度检验 第1部分：单柱和双柱立式车床 - 中英文版 |
|
|
|
|
GB/T 16462.8-2009 Test conditions for numerically controlled turning machines and turning centres - Part 8: Evaluation of thermal distortions 数控车床和车削中心检验条件 第8部分：热变形的评定 - 中英文版 |
|
|
|
|
GB/T 16462.7-2009 Test conditions for numerically controlled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes 数控车床和车削中心检验条件 第7部分：在坐标平面内轮廓特性的评定 - 中英文版 |
|
|
|
|
GB/T 8190.11-2009 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions 往复式内燃机 排放测量 第11部分：非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量 - 中英文版 |
|
|
|
|
GB/T 19216.31-2008 Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0.6/1 kV 在火焰条件下电缆或光缆的线路完整性试验 第31部分：供火并施加冲击的试验程序和要求 额定电压0.6/1kV及以下电缆 - 中英文版 |
|
|
|
|
GB/T 19216.12-2008 Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 12: Apparatus - Fire with shock at a temperature of at least 830℃ 在火焰条件下电缆或光缆的线路完整性试验 第12部分：试验装置 火焰温度不低于830℃的供火并施加冲击 - 中英文版 |
|
|
|
|
GB/T 20159.7-2008 Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Portable and non-stationary use 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 携带和非固定使用 - 中英文版 |
|
|
|
|
GB/T 20159.6-2008 Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Ship environment 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 船用 - 中英文版 |
|
|
|
|
GB/T 20159.2-2008 Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Transportation 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 运输 - 中英文版 |
|
|
|
|
GB/T 5289.1-2008 Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 1: Machines with fixed column and movable table 卧式铣镗床精度检验条件 第1部分：固定立柱和移动式工作台机床 - 中英文版 |
|
|
|
|
GB/T 1040.5-2008 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites 塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件 - 中英文版 |
|
|
|
|
GB/T 18380.36-2008 Tests on electric and optical fibre cables under fire conditions - Part 36:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 - 中英文版 |
|
|
|
|
GB/T 18380.35-2008 Tests on electric and optical fibre cables under fire conditions - Part 35:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 - 中英文版 |
|
|
|
|
GB/T 18380.34-2008 Tests on electric and optical fibre cables under fire conditions - Part 34:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 - 中英文版 |
|
|
|
|
GB/T 18380.33-2008 Tests on electric and optical fibre cables under fire conditions - Part 33:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 - 中英文版 |
|
|
|
|
GB/T 18380.32-2008 Tests on electric and optical fibre cables under fire conditions - Part 32:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 - 中英文版 |
|
|
|
|
GB/T 18380.31-2008 Test on electric and optical fibre cables under fire conditions - Part 31:Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 - 中英文版 |
|
|
|
|
GB/T 18380.13-2008 Tests on electric and optical fibre cables under fire conditions - Part 13:Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles 电缆和光缆在火焰条件下的燃烧试验 第13部分：单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落(物)/微粒的试验方法 - 中英文版 |
|
|
|
|
GB/T 7121.1-2008 The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分：后置式静态试验方法 - 中英文版 |
|
|
|
|
GB/T 21948.2-2008 Test conditions for CNC milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分：立式铣床 - 中英文版 |
|
|
|
|
GB/T 21948.1-2008 Test conditions for CNC milling machines with table of variable height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分：卧式铣床 - 中英文版 |
|
|
|
|
GB/T 9291-2008 Surface active agents - Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textile under high temperature conditions 表面活性剂 高温条件下分散染料染聚酯织物时匀染剂的抑染作用测试法 - 中英文版 |
|
|
|
|
GB/T 21000.1-2007 Commercial refrigerated cabinets - Methods of test - Part 1: General test conditions and temperature test 商用冷藏柜 试验方法 第1部分：通用试验条件及温度试验 - 中英文版 |
|
|
|
|
GB/T 20957.4-2007 Test conditions for precision machining centres - Part 4：Accuracy and repeatability of positioning of linear and rotary axes 精密加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 - 中英文版 |
|
|
|
|
GB/T 18400.9-2007 Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change 加工中心检验条件 第9部分：刀具交换和托板交换操作时间的评定 - 中英文版 |
|
|
|
|
GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验 - 中英文版 |
|
|
|
|
GB/T 20958.2-2007 Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines with vertical spindle 数控床身铣床检验条件 精度检验 第2部分: 立式铣床 - 中英文版 |
|
|
|
|
GB/T 20958.1-2007 Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 1: Milling machines with horizontal spindle 数控床身铣床检验条件 精度检验 第1部分: 卧式铣床 - 中英文版 |
|
|
|
|
GB/T 20957.7-2007 Test conditions for precision machining centres - Part 7: Accuracy of a finished test piece 精密加工中心检验条件 第7部分：精加工试件精度检验 - 中英文版 |
|
|
|
|
GB/T 20957.5-2007 Test conditions of precision machining centres - Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets 精密加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验 - 中英文版 |
|
|
|
|
GB/T 20853-2007 Corrosion of metals and alloys - corrosion in artificial atmosphere - accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution 金属和合金的腐蚀 人造大气中的腐蚀 暴露于间歇喷洒盐溶液和潮湿循环受控条件下的加速腐蚀试验 - 中英文版 |
|
|
|
|
GB/T 1040.4-2006 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites 塑料 拉伸性能的测定 第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件 - 中英文版 |
|
|
|
|
GB/T 1040.3-2006 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets 塑料 拉伸性能的测定 第3部分：薄膜和薄片的试验条件 - 中英文版 |
|
|
|
|
GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 - 中英文版 |
|
|
|
|
GB/T 5289.3-2006 Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Part 3: Floor type machines with detached, stationary work-holding table 卧式铣镗床检验条件 精度检验 第3部分:带分离式工件夹持固定工作台的落地式机床 - 中英文版 |
|
|
|
|
GB/T 3932.2-2006 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 2: Machines with vertical spindle 床身铣床检验条件 精度检验 第2部分:立式铣床 - 中英文版 |
|
|
|
|
GB/T 3932.1-2006 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 1: Machines with horizontal spindle 床身铣床检验条件 精度检验 第1部分:卧式铣床 - 中英文版 |
|
|
|
|
GB/T 19811-2005 Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 在定义堆肥化中试条件下 塑料材料崩解程度的测定 - 中英文版 |
|
| Find out:115Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
