China Test methods for Pre GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 8243.6-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 - 中英文版 |
 |
|
|
|
GB/T 13931-2017 Electrostatic precipitator—Methods of performance tests 电除尘器 性能测试方法 - 中英文版 |
|
|
|
|
GB/T 14513.1-2017 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow 气动 使用可压缩流体元件的流量特性测定 第1部分：稳态流动的一般规则和试验方法 - 中英文版 |
|
|
|
|
GB/T 5170.10-2017 Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 - 中英文版 |
|
|
|
|
GB/T 35160.3-2017 Test methods for agglomerated stone—Part 3：Determination of compressive strength 合成石材试验方法 第3部分：压缩强度的测定 - 中英文版 |
|
|
|
|
GB/T 25774.2-2016 Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验 - 中英文版 |
|
|
|
|
GB/T 13277.4-2015 Compressed air—Part 4: Test methods for solid particle content 压缩空气 第4部分：固体颗粒测量方法 - 中英文版 |
|
|
|
|
GB/T 13277.3-2015 Compressed air—Part 3: Test methods for measurement of humidity 压缩空气 第3部分：湿度测量方法 - 中英文版 |
|
|
|
|
GB/T 13277.2-2015 Compressed air—Part 2: Test methods for oil aerosol content 压缩空气 第2部分：悬浮油含量测量方法 - 中英文版 |
|
|
|
|
GB/T 8243.13-2015 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 - 中英文版 |
|
|
|
|
GB/T 15478-2015 Test methods of the performances for pressure transducer/sensor 压力传感器性能试验方法 - 中英文版 |
|
|
|
|
GB/T 32154-2015 Methods of performance tests for electrostatic-fabric integrated precipitator 电袋复合除尘器性能测试方法 - 中英文版 |
|
|
|
|
GB/T 31248-2014 Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions 电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法 - 中英文版 |
|
|
|
|
GB/T 10870-2014 The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle 蒸气压缩循环冷水(热泵)机组性能试验方法 - 中英文版 |
|
|
|
|
GB/T 30475.2-2013 Filters for compressed air― Test methods―Part 2: Oil vapours 压缩空气过滤器 试验方法 第2部分:油蒸气 - 中英文版 |
|
|
|
|
GB/T 30475.1-2013 Filters for compressed air―Test methods―Part 1: Oil aerosols 压缩空气过滤器 试验方法 第1部分：悬浮油 - 中英文版 |
|
|
|
|
GB/T 5169.20-2013 Fire hazard testing for electric and electronic products—Part 20: Surface spread of flame—Summary and relevance of test methods 电工电子产品着火危险试验 第20部分：火焰表面蔓延 试验方法概要和相关性 - 中英文版 |
|
|
|
|
GB/T 30177.1-2013 Methods of perfomance testing for filters―Part 1：Press filter 过滤机性能测试方法 第1部分：加压过滤机 - 中英文版 |
|
|
|
|
GB/T 27797.4-2013 Fibre-reinforced plastics - Methods of producing test plates - Part 4：Moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 - 中英文版 |
|
|
|
|
GB/T 29627.2-2013 Aramid pressboard for electrical purposes - Part 2: Methods of test 电气用聚芳酰胺纤维纸板 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 19264.2-2013 Pressboard and presspaper for electrical purposes - Part 2: Methods of test 电气用压纸板和薄纸板 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 16903.2-2013 Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility 标志用图形符号表示规则 第2部分：理解度测试方法 - 中英文版 |
|
|
|
|
GB/T 29046-2012 Test methods of technical specification for pre-insulated directly buried district heating pipes 城镇供热预制直埋保温管道技术指标检测方法 - 中英文版 |
|
|
|
|
GB/T 29459.2-2012 Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 - 中英文版 |
|
|
|
|
GB/T 29459.1-2012 Small punch test methods of metallic materials for in-service pressure equipments - Part 1：General requirements 在役承压设备金属材料小冲杆试验方法 第1部分：总则 - 中英文版 |
|
|
|
|
GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory 检测实验室中常用不确定度评定方法与表示 - 中英文版 |
|
|
|
|
GB/T 15623.3-2012 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for Pressure control valves 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 - 中英文版 |
|
|
|
|
GB/T 27797.8-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 - 中英文版 |
|
|
|
|
GB/T 27797.3-2011 Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 - 中英文版 |
|
|
|
|
GB/T 26919-2011 Coal preparation plant - Methods for the natural falling testing of slurry 选煤厂 煤泥水自然沉降试验方法 - 中英文版 |
|
|
|
|
GB/T 26918-2011 Coal preparation plant - Test methods for degradation in water of raw coal feed in drum 选煤厂 煤的转筒泥化试验方法 - 中英文版 |
|
|
|
|
GB/T 26729-2011 Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods 农业灌溉设备 地表灌溉用聚氯乙烯（PVC）低压管 技术规范和试验方法 - 中英文版 |
|
|
|
|
GB/T 17491-2011 Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance 液压泵、马达和整体传动装置 稳态性能的试验及表达方法 - 中英文版 |
|
|
|
|
GB/T 5923-2010 Test methods of fuel filter for automotive compression ignition engines 汽车柴油机燃油滤清器试验方法 - 中英文版 |
|
|
|
|
GB/T 25774.3-2010 Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 - 中英文版 |
|
|
|
|
GB/T 25774.1-2010 Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验 - 中英文版 |
|
|
|
|
GB/T 25395-2010 Equipment for vine cultivation and wine making - Grape presses - Methods of test 葡萄栽培和葡萄酒酿制设备 葡萄压榨机 试验方法 - 中英文版 |
|
|
|
|
GB/T 25217.2-2010 Methods for test，monitoring and prevention of rock burst - Part 2: Classification and laboratory test method on bursting liability of coal 冲击地压测定、监测与防治方法 第2部分：煤的冲击倾向性分类及指数的测定方法 - 中英文版 |
|
|
|
|
GB/T 25217.1-2010 Methods for test, monitoring and prevention of rock burst - Part 1: Classification and laboratory test method on bursting liability of roof strata 冲击地压测定、监测与防治方法 第1部分：顶板岩层冲击倾向性分类及指数的测定方法 - 中英文版 |
|
|
|
|
GB/T 13929-2010 Methods of testing for water-ring vacuum pumps and compressors 水环真空泵和水环压缩机 试验方法 - 中英文版 |
|
|
|
|
GB 12476.9-2010 Electrical apparatus for use in the presence of combustible dust - Part 9: Test methods - Method for determining the electrical resistivity of dust in layers 可燃性粉尘环境用电气设备 第9部分：试验方法 粉尘层电阻率的测定方法 - 中英文版 |
|
|
|
|
GB 12476.8-2010 Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust 可燃性粉尘环境用电气设备 第8部分： 试验方法 确定粉尘最低点燃温度的方法 - 中英文版 |
|
|
|
|
GB 12476.10-2010 Electrical apparatus for use in the presence of combustible dust - Part 10: Test methods - Method for determining minimum ignition energy of dust/air mixtures 可燃性粉尘环境用电气设备 第10部分：试验方法 粉尘与空气混合物最小点燃能量的测定方法 - 中英文版 |
|
|
|
|
GB/T 23654-2009 Rubber，vulcanized and thermoplastic - Preformed gaskets used in buildings - Classification，specification and test methods 硫化橡胶和热塑性橡胶 建筑用预成型密封条的分类、要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 11837-2009 Test methods of the concrete compressive strength of concrete pipes for water 混凝土管用混凝土抗压强度试验方法 - 中英文版 |
|
|
|
|
GB/T 9327-2008 Compression and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements 额定电压35kV(Um=40.5kV)及以下电力电缆导体用压接式和机械式连接金具 试验方法和要求 - 中英文版 |
|
|
|
|
GB/T 20634.2-2008 Non-impregnated densified laminated wood for electrical purposes - Part 2: Methods of test 电气用非浸渍致密层压木 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 3903.28-2008 Footwear - Test methods for outsoles - Compression energy 鞋类 外底试验方法 压缩能 - 中英文版 |
|
|
|
|
GB/T 14625.4-2008 Test methods for basketball, football, volleyball and handball - Part 4: Test conditions and sample preparation 篮球、足球、排球、手球试验方法 第4部分：试验条件与试样准备 - 中英文版 |
|
|
|
|
GB/T 22471.2-2008 Resin impregnated glass banding tape for electrical insulation - Part 2: Test methods 电气绝缘用树脂浸渍玻璃纤维网状无纬绑扎带 第2部分：试验方法 - 中英文版 |
|
| Find out:149Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
