China Test methods for ess GB Standards Search Result

and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .


	GB/T 17614.2-2015 Transmitters for use in industrial-process control systems—Part 2: Methods for inspection and roution testing 工业过程控制系统用变送器第2部分：检查和例行试验方法 - 中英文版
	GB/T 31334.3-2015 Test methods for dipped canvas—Part 3: Stiffness 浸胶帆布试验方法第3部分：硬挺度 - 中英文版
	GB/T 30671-2014 Ultraviolet curable varnishing process control requirements and testing methods for paper prints 纸质印刷品紫外线固化光油上光过程控制要求及检验方法 - 中英文版
	GB/T 4372.6-2014 Methods for chemical analysis of zincoxide produced by direct process―Part 6：Testing of metallic zinc 直接法氧化锌化学分析方法第6部分：金属锌的检验 - 中英文版
	GB/T 12967.4-2014 Test methods for anodic oxidation coatings of aluminium and aluminium alloys―Part 4：Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings 铝及铝合金阳极氧化膜检测方法第4部分：着色阳极氧化膜耐紫外光性能的测定 - 中英文版
	GB/Z 5169.34-2014 Fire hazard testing for electric and eletronic products—Part 34: Guidance for assessing the fire hazard—Ignitability—Summary and relevance of test methods 电工电子产品着火危险试验第34部分：着火危险评定导则起燃性试验方法概要和相关性 - 中英文版
	GB/T 30860-2014 Test methods for surface roughness and saw mark of silicon wafers for solar cells 太阳能电池用硅片表面粗糙度及切割线痕测试方法 - 中英文版
	GB/T 11017.1-2014 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 1: Test methods and requirements 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件第1部分：试验方法和要求 - 中英文版
	GB/T 10870-2014 The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle 蒸气压缩循环冷水(热泵)机组性能试验方法 - 中英文版
	GB/T 30475.2-2013 Filters for compressed air― Test methods―Part 2: Oil vapours 压缩空气过滤器试验方法第2部分:油蒸气 - 中英文版
	GB/T 30475.1-2013 Filters for compressed air―Test methods―Part 1: Oil aerosols 压缩空气过滤器试验方法第1部分：悬浮油 - 中英文版
	GB/T 30177.1-2013 Methods of perfomance testing for filters―Part 1：Press filter 过滤机性能测试方法第1部分：加压过滤机 - 中英文版
	GB/T 12967.5-2013 Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5：Assessment of resistance of anodic oxidation coatings to cracking by deformation 铝及铝合金阳极氧化膜检测方法第5部分：用变形法评定阳极氧化膜的抗破裂性 - 中英文版
	GB/T 29627.2-2013 Aramid pressboard for electrical purposes - Part 2: Methods of test 电气用聚芳酰胺纤维纸板第2部分：试验方法 - 中英文版
	GB/T 19264.2-2013 Pressboard and presspaper for electrical purposes - Part 2: Methods of test 电气用压纸板和薄纸板第2部分：试验方法 - 中英文版
	GB/T 29417-2012 Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete 水泥砂浆和混凝土干燥收缩开裂性能试验方法 - 中英文版
	GB/T 29459.2-2012 Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法第2部分：室温下拉伸性能的试验方法 - 中英文版
	GB/T 29459.1-2012 Small punch test methods of metallic materials for in-service pressure equipments - Part 1：General requirements 在役承压设备金属材料小冲杆试验方法第1部分：总则 - 中英文版
	GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory 检测实验室中常用不确定度评定方法与表示 - 中英文版
	GB/T 29247-2012 General methods for testing the performance of industrial process measurement and control instruments 工业自动化仪表通用试验方法 - 中英文版
	GB/T 29235.2-2012 Energy efficiency metrologies and test methods for access equipments - Part 2: ADSL DSLAM 接入设备节能参数和测试方法第2部分：ADSL局端 - 中英文版
	GB/T 29235.1-2012 Energy efficiency metrology and test methods for access equipments - Part 1：ADSL CPE 接入设备节能参数和测试方法第1部分：ADSL用户端 - 中英文版
	GB/T 15623.3-2012 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves 液压传动电调制液压控制阀第3部分：压力控制阀试验方法 - 中英文版
	GB/T 27797.8-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料试验板制备方法第8部分：SMC及BMC模塑 - 中英文版
	GB/T 27797.3-2011 Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料试验板制备方法第3部分：湿法模塑 - 中英文版
	GB/T 27934.4-2011 Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive 纸质印刷品覆膜过程控制及检测方法第4部分：反应型聚氨酯（PUR）热熔胶即涂覆膜 - 中英文版
	GB/T 27934.3-2011 Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive 纸质印刷品覆膜过程控制及检测方法第3部分：水基胶黏剂即涂干式覆膜 - 中英文版
	GB/T 27934.2-2011 Lamination process control and testing methods for paper prints - Part 2: Lamination with EVA adhesive 纸质印刷品覆膜过程控制及检测方法第2部分：乙烯-醋酸乙烯共聚物（EVA）热熔胶预涂覆膜 - 中英文版
	GB 27934.1-2011 Lamination process control and testing methods for paper prints - Part 1: General requirements 纸质印刷品覆膜过程控制及检测方法第1部分：基本要求 - 中英文版
	GB/T 1346-2011 Test methods for water requirement of normal consistency, setting time and soundness of the portland cement 水泥标准稠度用水量、凝结时间、安定性检验方法 - 中英文版
	GB/T 26729-2011 Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods 农业灌溉设备地表灌溉用聚氯乙烯（PVC）低压管技术规范和试验方法 - 中英文版
	GB/T 7962.17-2010 Colourless optical glass test methods - Part 17: Autocollimation test method for refractive index in the ultraviolet and infrared wave band 无色光学玻璃测试方法第17部分：紫外、红外折射率 - 中英文版
	GB/T 7962.16-2010 Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient，transformation temperature and yield point temperature 无色光学玻璃测试方法第16部分：线膨胀系数、转变温度和弛垂温度 - 中英文版
	GB/T 5923-2010 Test methods of fuel filter for automotive compression ignition engines 汽车柴油机燃油滤清器试验方法 - 中英文版
	GB/T 25395-2010 Equipment for vine cultivation and wine making - Grape presses - Methods of test 葡萄栽培和葡萄酒酿制设备葡萄压榨机试验方法 - 中英文版
	GB/T 13929-2010 Methods of testing for water-ring vacuum pumps and compressors 水环真空泵和水环压缩机试验方法 - 中英文版
	GB/T 14634.1-2010 Test methods of rare earth three-band phosphors for fluorescent lamps - Part 1: Determination of relative brightness 灯用稀土三基色荧光粉试验方法第1部分：相对亮度的测定 - 中英文版
	GB/T 9766.4-2009 Test method for tyre valve - Part 4: Clamp-in tubeless valves test methods 轮胎气门嘴试验方法第4部分：压紧式无内胎气门嘴试验方法 - 中英文版
	GB/T 6621-2009 Testing methods for surface flatness of silicon slices 硅片表面平整度测试方法 - 中英文版
	GB/T 24518-2009 Corrosion of metals and alloys - Test methods for stress corrosion cracking in outdoor environments 金属和合金的腐蚀应力腐蚀室外暴露试验方法 - 中英文版
	GB/T 24218.2-2009 Textiles - Test methods for nonwovens - Part 2: Determination of thickness 纺织品非织造布试验方法第2部分：厚度的测定 - 中英文版
	GB/T 23595.2-2009 Test methods of rare earth yellow phosphor for white LED lamps - Part 2: Determination of relative brightness 白光LED灯用稀土黄色荧光粉试验方法第2部分：相对亮度的测定 - 中英文版
	GB/T 4909.8-2009 Test methods for bare wires - Part 8: Hardness test - Brinell hardness test 裸电线试验方法第8部分：硬度试验布氏法 - 中英文版
	GB/T 11837-2009 Test methods of the concrete compressive strength of concrete pipes for water 混凝土管用混凝土抗压强度试验方法 - 中英文版
	GB/T 9327-2008 Compression and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements 额定电压35kV(Um=40.5kV)及以下电力电缆导体用压接式和机械式连接金具试验方法和要求 - 中英文版
	GB/T 3903.36-2008 Footwear - Test methods for accessories: shoe laces - Abrasion resistance 鞋类鞋带试验方法耐磨性能 - 中英文版
	GB/T 3903.34-2008 Footwear - Test methods for shanks - Longitudinal stiffness 鞋类勾心试验方法纵向刚度 - 中英文版
	GB/T 3903.28-2008 Footwear - Test methods for outsoles - Compression energy 鞋类外底试验方法压缩能 - 中英文版
	GB/T 14625.1-2008 Test methods for basketball, football, volleyball and handball - Part 1: The measurement of roundness 篮球、足球、排球、手球试验方法第1部分：圆度测定方法 - 中英文版
	GB/T 22638.3-2008 Test methods for aluminium and aluminium alloy foils - Part 3: Determination of stickiness 铝箔试验方法第3部分：粘附性的测定 - 中英文版

Find out:211Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5