Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Internal combustion GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
       
GB/T 15548-2008
General specification for three-phase synchronous generators driven by reciprocating Internal combustion engine
往复式内燃机驱动的三相同步发电机通用技术条件 - 中英文版
GB/T 725-2008
Internal combustion engines - Nomenclature and code of designations
内燃机产品名称和型号编制规则 - 中英文版
GB/T 12773-2008
Valve steel and superalloy bars for Internal combustion engines
内燃机气阀用钢及合金棒材 - 中英文版
GB 20800.3-2008
General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
爆炸性环境用往复式内燃机防爆技术通则 第3部分:存在甲烷和(或)可燃性粉尘的地下矿区巷道用I类内燃机 - 中英文版
GB/T 6072.1-2008
Reciprocating Internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use
往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求 - 中英文版
GB/T 21406-2008
Internal combustion engines - Engine weight (mass) declaration
内燃机 发动机的重量(质量)标定 - 中英文版
GB/T 21404-2008
Internal combustion engine - Determination and method for the measurement of engine power - General requirements
内燃机 发动机功率的确定和测量方法 一般要求 - 中英文版
GB/T 20969.4-2008
Special environmental condition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines
特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械 - 中英文版
GB/T 21428-2008
Reciprocating Internal combustion engine driven generating sets - Safety
往复式内燃机驱动的发电机组 安全性 - 中英文版
GB/T 21427-2008
Special environmental condition - Requirements and test methods for electric powerplant with Internal combustion engines in dry heat-desert
特殊环境条件 干热沙漠对内燃机电站系统的技术要求及试验方法 - 中英文版
GB/T 21426-2008
Special environmental condition - Requirements for electric power plant with Internal combustion engines on plateau
特殊环境条件 高原对内燃机电站的要求 - 中英文版
GB/T 21425-2008
Low-noise electric power plant with Internal combustion engine for general specification
低噪声内燃机电站噪声指标要求及测量方法 - 中英文版
GB/T 21156.1-2007
Special environmental condition - Machinery for desert - Part 1: Internal combustion engines on dry heat-desert condition
特殊环境条件 沙漠机械 第1部分:干热沙漠内燃动力机械 - 中英文版
GB/T 20969.1-2007
Special environmental condition - Machinery for plateau - Part 1: Requirements for Internal combustion engines on plateau
特殊环境条件 高原机械 第1部分:高原对内燃动力机械的要求 - 中英文版
GB/T 8243.12-2007
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量 - 中英文版
GB/T 8243.11-2007
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 11: Self-cleaning filters
内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器 - 中英文版
GB/T 6809.4-2007
Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems
往复式内燃机 零部件和系统术语 第4部分:增压及进排气管系统 - 中英文版
GB/T 1147.2-2007
Small and medium power Internal combustion engines - Part 2: Test methods
中小功率内燃机 第2部分:试验方法 - 中英文版
GB/T 1147.1-2007
Small and medium power Internal combustion engines - Part 1:General requirements
中小功率内燃机 第1部分:通用技术条件 - 中英文版
GB/T 8243.7-2006
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 7: Vibration fatigue test
内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 - 中英文版
GB/T 8190.6-2006
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
往复式内燃机 排放测量 第6部分:测量结果和试验报告 - 中英文版
GB/T 20787-2006
Reciprocating Internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范 - 中英文版
GB 20800.2-2006
General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 2: Group Ⅱengines for use in flammable dust atmospheres
爆炸性环境用往复式内燃机防爆技术通则 第2部分:可燃性粉尘环境用Ⅱ类内燃机 - 中英文版
GB 20800.1-2006
General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 1: Group Ⅱengines for use in flammable gas and vapor atmospheres
爆炸性环境用往复式内燃机防爆技术通则 第1部分:可燃性气体和蒸汽环境用 Ⅱ类内燃机 - 中英文版
GB 20651.1-2006
Reciprocating Internal combustion engines - Safety - Part 1: Compression ignition engines
往复式内燃机 安全 第1部分:压燃式发动机 - 中英文版
GB/T 20420-2006
Lubricants, industrial oils and related products (class L)-Family E (Internal combustion engine oils)-Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
润滑剂、工业用油和相关产品(L类)-E组(内燃机油)-二冲程汽油发动机油(EGB、EGC和EGD) - 中英文版
GB/T 12786-2006
Automatic electric power plant with Internal combustion engines for general specification
自动化内燃机电站通用技术条件 - 中英文版
GB/T 8243.6-2006
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 6: Static burst pressure test
内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验 - 中英文版
GB/T 8243.5-2006
Methods of test for full-flow lubricating oil filters for Internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验 - 中英文版
GB/T 20064.2-2006
Reciprocating Internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement
往复式内燃机 手柄起动装置 第2部分:脱开角试验方法 - 中英文版
GB/T 20064.1-2006
Reciprocating Internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests
往复式内燃机 手柄起动装置 第1部分:安全要求和试验 - 中英文版
GB/T 1883.2-2005
Reciprocating Internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance
往复式内燃机 词汇 第2部分:发动机维修术语 - 中英文版
GB/T 1883.1-2005
Reciprocating Internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation
往复式内燃机 词汇 第1部分:发动机设计和运行术语 - 中英文版
GB/T 20024-2005
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability
内燃机用橡胶和塑料燃油软管 可燃性试验方法 - 中英文版
GB/T 3821-2005
Small and medium power Internal combustion engines-Cleanliness measurement
中小功率内燃机清洁度测定方法 - 中英文版
GB/T 8188-2003
Internal combustion engine--Emissions terminology and nomenclature
内燃机 排放术语和定义 - 中英文版
GB/T 6072.5-2003
Reciprocating Internal combustion engines--Performance--Part 5: Torsional vibrations
往复式内燃机 性能 第5部分: 扭转振动 - 中英文版
GB/T 4672-2003
Reciprocating Internal combustion engines--Hand-operated control devices--Standard direction of motion
往复式内燃机 手操纵控制机构 标准动作方向 - 中英文版
GB/T 8243.4-2003
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 4: Initial particle retention efficiency,life and cumulative efficiency(gravimetric method)
内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法) - 中英文版
GB/T 8243.3-2003
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature
内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 - 中英文版
GB/T 8243.2-2003
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 2: Element by-pass valve characteristics
内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性 - 中英文版
GB/T 8243.1-2003
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 1: Differential pressure/flow characteristics
内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性 - 中英文版
GB/T 8190.8-2003
Reciprocating Internal combustion engines--Exhaust emission measurement--Part 8: Engine group determination
往复式内燃机 排放测量 第8部分: 发动机系组的确定 - 中英文版
GB/T 8190.7-2003
Reciprocating Internal combustion engines--Exhaust emission measurement--Part 7: Engine family determination
往复式内燃机 排放测量 第7部分: 发动机系族的确定 - 中英文版
GB/T 8190.3-2003
Reciprocating Internal combustion engines--Exhaust emission measurement--Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
往复式内燃机 排放测量 第3部分: 稳态工况排气烟度的定义和测量方法 - 中英文版
GB/T 2820.9-2002
Reciprocating Internal combustion engine driven alternating current generating sets--Part9:Measurement and evaluation of mechanical vibrations
往复式内燃机驱动的交流发电机组 第9部分:机械振动的测量和评价 - 中英文版
GB/T 2820.8-2002
Reciprocating Internal combustion engine driven alternating current generating sets--Part 8:Requirements and tests for low-power generating sets
往复式内燃机驱动的交流发电机组 第8部分:对小功率发电机组的要求和试验 - 中英文版
GB/T 2820.12-2002
Reciprocating Internal combustion engine driven alternating current generating sets--Part 12:Emergency power supply to safety services
往复式内燃机驱动的交流发电机组 第12部分:对安全装置的应急供电 - 中英文版
GB/T 2820.10-2002
Reciprocating Internal combustion engine driven alternating current generating sets--Part 10:Measurement of airborne noise by the enveloping surface method
往复式内燃机驱动的交流发电机组 第10部分:噪声的测量(包面法) - 中英文版
GB/T 2820.7-2002
Reciprocating Internal combustion engine driven alternating current generating sets--Part 7:Technical declarations for specification and design
往复式内燃机驱动的交流发电机组 第7部分:用于技术条件和设计的技术说明 - 中英文版

Find out:209Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved