China Method of test for i GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 20102-2006 Test method for determining tensile breaking strength of glass fiber reinforcing mesh, after exposure to a sodium hydroxide sulution 玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法 - 中英文版 |
 |
|
|
|
GB/T 8243.6-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 - 中英文版 |
|
|
|
|
GB/T 8243.5-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test 内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验 - 中英文版 |
|
|
|
|
GB/T 9973-2006 Test method for permeability of carbon materials 炭素材料透气度试验方法 - 中英文版 |
|
|
|
|
GB/T 6242-2006 Equipment for planting - Potato planters - Method of testing 种植机械 马铃薯种植机 试验方法 - 中英文版 |
|
|
|
|
GB/T 4510-2006 Test method for determination of breaking point of bitumen (Fraass method) 石油沥青脆点测定法#弗拉斯法 - 中英文版 |
|
|
|
|
GB/T 20170.1-2006 Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定 - 中英文版 |
|
|
|
|
GB/T 19993-2005 Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 - 中英文版 |
|
|
|
|
GB/T 19975-2005 Test method of tensile properties for high tenacity filament yarn 高强化纤长丝拉伸性能试验方法 - 中英文版 |
|
|
|
|
GB/T 19973.2-2005 Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process 医用器材的灭菌 微生物学方法 第二部分：确认灭菌过程的无菌试验 - 中英文版 |
|
|
|
|
GB/T 5334-2005 Performance requirments and test methods of passenger car wheels 乘用车车轮性能要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 5170.18-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 - 中英文版 |
|
|
|
|
GB/T 19936.1-2005 Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分：油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 - 中英文版 |
|
|
|
|
GB/T 20024-2005 Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 - 中英文版 |
|
|
|
|
GB/T 19816.7-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 - 中英文版 |
|
|
|
|
GB/T 19816.6-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 - 中英文版 |
|
|
|
|
GB/T 19816.5-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 - 中英文版 |
|
|
|
|
GB/T 18570.9-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法 - 中英文版 |
|
|
|
|
GB/T 18570.8-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法 - 中英文版 |
|
|
|
|
GB/T 18570.5-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法) - 中英文版 |
|
|
|
|
GB/T 18570.3-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法) - 中英文版 |
|
|
|
|
GB/T 18570.10-2005 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法 - 中英文版 |
|
|
|
|
GB/T 6148-2005 Test method for temperature-resistance coefficient of precision resistance alloys 精密电阻合金电阻温度系数测试方法 - 中英文版 |
|
|
|
|
GB/T 6147-2005 Test method for thermoelectric power of precision resistance alloys 精密电阻合金热电动势率 测试方法 - 中英文版 |
|
|
|
|
GB/T 5170.20-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments 电工电子产品环境试验设备 基本参数检定方法 水试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.19-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments 电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备 - 中英文版 |
|
|
|
|
GB/T 5170.17-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 - 中英文版 |
|
|
|
|
GB 16155-2005 Test method for heating performance of civil water heating coal stove 民用水暖煤炉热性能试验方法 - 中英文版 |
|
|
|
|
GB/T 8625-2005 Test method of difficult-flammability for building materials 建筑材料难燃性试验方法 - 中英文版 |
|
|
|
|
GB/T 10901-2005 Methods of Performance testing for centrifuge 离心机 性能测试方法 - 中英文版 |
|
|
|
|
GB/T 7998-2005 Test method for intergranular corrosion of aluminium alloy 铝合金晶间腐蚀测定方法 - 中英文版 |
|
|
|
|
GB/T 5270-2005 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 - 中英文版 |
|
|
|
|
GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 - 中英文版 |
|
|
|
|
GB/T 19816.3-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 - 中英文版 |
|
|
|
|
GB/T 19816.2-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 - 中英文版 |
|
|
|
|
GB/T 19816.1-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 - 中英文版 |
|
|
|
|
GB/T 19789-2005 Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 - 中英文版 |
|
|
|
|
GB/T 11081-2005 Standard Test Method for Ultraviolet Adsorption of White Oils 白油紫外吸光度测定法 - 中英文版 |
|
|
|
|
GB/T 8924-2005 Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method 纤维增强塑料燃烧性能试验方法 氧指数法 - 中英文版 |
|
|
|
|
GB/T 7559-2005 Test method for bearing strength by bolted joints of fiber reinforced plastics laminates 纤维增强塑料层合板 螺栓连接挤压强度试验方法 - 中英文版 |
|
|
|
|
GB/T 6058-2005 Test method for preparation and internal pressure testing of filament-wound pressure vessels 纤维缠绕压力容器制备和内压试验方法 - 中英文版 |
|
|
|
|
GB/T 6011-2005 Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method 纤维增强塑料燃烧性能试验方法 炽热棒法 - 中英文版 |
|
|
|
|
GB/T 4944-2005 Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates 玻璃纤维增强塑料层合板层间拉伸强度 试验方法 - 中英文版 |
|
|
|
|
GB/T 3857-2005 Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 - 中英文版 |
|
|
|
|
GB/T 3856-2005 Test method for compression properties of unidirectional fiber reinforced plastics 单向纤维增强塑料平板压缩性能试验方法 - 中英文版 |
|
|
|
|
GB/T 3855-2005 Test method for resin content of carbon fiber reinforced plastics 碳纤维增强塑料树脂含量试验方法 - 中英文版 |
|
|
|
|
GB/T 3854-2005 Test method for hardness of reinforced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 - 中英文版 |
|
|
|
|
GB/T 3362-2005 Test methods for tensile properties of carbon fiber multifilament 碳纤维复丝拉伸性能试验方法 - 中英文版 |
|
|
|
|
GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics 玻璃纤维增强塑料树脂含量试验方法 - 中英文版 |
|
|
|
|
GB/T 2576-2005 Test method for insoluble matter content of resin rsed in fiber reinforced plastics 纤维增强塑料树脂不可溶分含量试验方法 - 中英文版 |
|
| Find out:2496Items | To Page of: First -Previous-Next -Last | [37] [38] [39] [40] [41] [42] [43] |
+86-755-2583-1330
