China Fibre reinforced pla GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 40340-2021 Composites and metal assemblies—Galvanic corrosion tests of carbon Fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests 复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验 - 中英文版 |
 |
|
|
|
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 - 中英文版 |
|
|
|
|
GB/T 37897-2019 Fibre-reinforced plastic composites—Determination of the in-plane shear modulus by the plate twist method 纤维增强塑料复合材料 平板扭曲法测定面内剪切模量 - 中英文版 |
|
|
|
|
GB/T 36532-2018 Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料 热固性模塑料和预浸料 固化特性测定 - 中英文版 |
|
|
|
|
GB 51160-2016 Technical code for Fibre reinforced plastics equipment and piping engineering 纤维增强塑料设备和管道工程技术规范 - 中英文版 |
|
|
|
|
GB 51107-2015 Code for design of fibre reinforced calcium silicate board plant 纤维增强硅酸钙板工厂设计规范 - 中英文版 |
|
|
|
|
GB/T 27797.4-2013 Fibre-reinforced plastics - Methods of producing test plates - Part 4：Moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 - 中英文版 |
|
|
|
|
GB/T 29552-2013 Fibre reinforced plastics composites bridge decks 纤维增强复合材料桥板 - 中英文版 |
|
|
|
|
GB/T 28891-2012 Fibre-reinforced plastic composites - Determination of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials 纤维增强塑料复合材料 单向增强材料Ⅰ型层间断裂韧性GⅠC的测定 - 中英文版 |
|
|
|
|
GB/T 27797.9-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分：GMT/STC模塑 - 中英文版 |
|
|
|
|
GB/T 27797.8-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 - 中英文版 |
|
|
|
|
GB/T 27797.7-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 - 中英文版 |
|
|
|
|
GB/T 27797.6-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分：拉挤模塑 - 中英文版 |
|
|
|
|
GB/T 27797.5-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding 纤维增强塑料 试验板制备方法 第5部分：缠绕成型 - 中英文版 |
|
|
|
|
GB/T 27797.3-2011 Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 - 中英文版 |
|
|
|
|
GB/T 27797.2-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑 - 中英文版 |
|
|
|
|
GB/T 27797.1-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分：通则 - 中英文版 |
|
|
|
|
GB/T 27797.11-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 - 中英文版 |
|
|
|
|
GB/T 27797.10-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 - 中英文版 |
|
|
|
|
GB/T 3961-2009 Terms for Fibre reinforced plastics 纤维增强塑料术语 - 中英文版 |
|
|
|
|
GB/T 1040.5-2008 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites 塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件 - 中英文版 |
|
|
|
|
GB/T 1040.4-2006 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites 塑料 拉伸性能的测定 第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件 - 中英文版 |
|
|
|
|
GB/T 1450.2-2005 Fibre-reinforced plastic composites-Determination of the punch-type shear strength 纤维增强塑料冲压式剪切强度试验方法 - 中英文版 |
|
|
|
|
GB/T 1450.1-2005 Fibre-reinforced plastic composites-Determination of interlaminar shear strength 纤维增强塑料层间剪切强度试验方法 - 中英文版 |
|
|
|
|
GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties 纤维增强塑料弯曲性能试验方法 - 中英文版 |
|
|
|
|
GB/T 19467.2-2004 Plastics--Acquisition and presentation of comparable single-point data--Part 2:Long-fibre-reinforced plastics 塑料 可比单点数据的获得和表示 第2部分:长纤维增强材料 - 中英文版 |
|
|
|
|
GB/T 1634.2-2004 Plastics--Determination of temperature of deflection under load--Part 2:Plastics，ebonite and long-fibre-reinforced composites 塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤维增强复合材料 - 中英文版 |
|
|
|
|
GB/T 5009.98-2003 Method for analysis of hygienic standard of unsatur-ated polyester resin and glass Fibre reinforced plastics used as food containers and packaging materials 食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准的分析方法 - 中英文版 |
|
|
|
|
GB 13115-1991 Hygienic standard for unsaturated polyester resin and glass Fibre reinforced plastics used asfood containers and packaging materials 食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准 - 中英文版 |
|
| Find out:29Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-2583-1330
