China Method of testing na GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 43900-2024 Nondestructive testing of steel products - Ultrasonic testing method for torsional residual stress distribution of shaft components 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法 - 中英文版 |
 |
|
|
|
GB/T 4893.4-2023 Testing of physical and chemical properties of paint films on furniture surfaces Part 4: Adhesion cross-cut determination method 家具表面漆膜理化性能试验 第4部分：附着力交叉切割测定法 - 中英文版 |
|
|
|
|
GB/T 42907-2023 Testing of non-equilibrium carrier recombination lifetime in silicon ingots, silicon blocks and silicon wafers Non-contact eddy current induction method 硅锭、硅块和硅片中非平衡载流子复合寿命的测试 非接触涡流感应法 - 中英文版 |
|
|
|
|
GB/T 42871-2023 Non-destructive testing Acoustic emission testing Test method for acoustic emission signal of concrete 无损检测 声发射检测 混凝土声发射信号的测试方法 - 中英文版 |
|
|
|
|
GB/T 41309-2022 Nanotechnology, Endotoxin in vitro testing of nanomaterials, Limulus reagent method 纳米技术 纳米材料的内毒素体外测试 鲎试剂法 - 中英文版 |
|
|
|
|
GB/T 11047.2-2022 Textiles - Testing and evaluation of snagging properties of fabrics - Part 2: Rolling box method 纺织品 织物勾丝性能的检测和评价 第2部分：滚箱法 - 中英文版 |
|
|
|
|
GB/T 41704-2022 Testing method for cathode material of lithium ion battery - Determination of magnetic foreign matter content and residual alkali content 锂离子电池正极材料检测方法 磁性异物含量和残余碱含量的测定 - 中英文版 |
|
|
|
|
GB/T 20485.43-2021 Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准 - 中英文版 |
|
|
|
|
GB/T 20485.32-2021 Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第32部分：谐振测试 用冲击激励测试加速度计的频率和相位响应 - 中英文版 |
|
|
|
|
GB/T 1425-2021 Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis 贵金属及其合金熔化温度范围的测定 热分析试验方法 - 中英文版 |
|
|
|
|
GB/T 11809-2021 Test method of weld of fuel rod for PWR—Metallographic examination and radiographic testing 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验 - 中英文版 |
|
|
|
|
GB/T 39086-2020 Functional safety requirements and testing methods for battery management system of electric vehicles 电动汽车用电池管理系统功能安全要求及试验方法 - 中英文版 |
|
|
|
|
GB/T 34874.6-2020 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces 产品几何技术规范（GPS） X射线三维尺寸测量机 第6部分：工件的检测方法 - 中英文版 |
|
|
|
|
GB/T 38447-2020 Micro-electromechanical system technology—Fatigue testing method of MEMS structure using resonant vibration 微机电系统（MEMS）技术 MEMS结构共振疲劳试验方法 - 中英文版 |
|
|
|
|
GB/T 39684-2020 Testing method of thermal irregularities for external window opening 外窗热工缺陷现场测试方法 - 中英文版 |
|
|
|
|
GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 - 中英文版 |
|
|
|
|
GB/T 37656-2019 Maritime navigation and radiocommunication equipment and systems—VHF radiotelephone equipment incorporating Class“D”Digital Selective Calling（DSC）—Methods of testing and required test results 海上导航和无线电通信设备及系统 D级数字选择性呼叫（DSC）甚高频（VHF）无线电话 测试方法及要求的测试结果 - 中英文版 |
|
|
|
|
GB/T 37417-2019 Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements，methods of testing and required test results 海上导航和无线电通信设备及系统 航迹控制系统 操作和性能要求、测试方法及要求的测试结果 - 中英文版 |
|
|
|
|
GB/T 36986-2018 Dynamic testing methods of brake performance for automobiles 汽车制动性能动态检测方法 - 中英文版 |
|
|
|
|
GB/T 34713-2017 Chemicals—Validation process and principles of alternative methods for in vitro toxicological testing 化学品 体外毒性试验替代方法的验证程序和原则 - 中英文版 |
|
|
|
|
GB/T 33686-2017 General rules for analytical and testing methods of coal mine water 煤矿水水质分析的一般规定 - 中英文版 |
|
|
|
|
GB/T 33304-2016 Testing method of combustion characteristics of coal—Thermogravimetric analysis 煤炭燃烧特性试验方法 热重分析法 - 中英文版 |
|
|
|
|
GB/T 21956.3-2015 Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 3：Static testing method of rear mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第3部分：后置式静态试验方法 - 中英文版 |
|
|
|
|
GB/T 21956.2-2015 Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2：Dynamic testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第2部分：前置式动态试验方法 - 中英文版 |
|
|
|
|
GB/T 21956.1-2015 Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 1：Static testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第1部分：前置式静态试验方法 - 中英文版 |
|
|
|
|
GB/T 32061-2015 Testing method of laminated glass interlayer shear modulus 夹层玻璃中间层材料剪切模量的测量方法 - 中英文版 |
|
|
|
|
GB/T 32038-2015 Monitoring and testing method for energy saving of illumination engineering 照明工程节能监测方法 - 中英文版 |
|
|
|
|
GB/T 4372.6-2014 Methods for chemical analysis of zincoxide produced by direct process―Part 6：Testing of metallic zinc 直接法氧化锌化学分析方法 第6部分：金属锌的检验 - 中英文版 |
|
|
|
|
GB/T 30824-2014 Testing method for temperature uniformity of gas heat treatment furnace 燃气热处理炉温度均匀性测试方法 - 中英文版 |
|
|
|
|
GB/T 29834.3-2013 Maintainability of system and software - Part 3: Testing method 系统与软件维护性 第3部分：测试方法 - 中英文版 |
|
|
|
|
GB/T 29831.3-2013 Functionality of system and software - Part 3: Testing method 系统与软件功能性 第3部分：测试方法 - 中英文版 |
|
|
|
|
GB/T 29071-2012 Non-destructive testing - Test method for industrial computed tomography (CT) examination of initiating explosive device 无损检测 火工装置工业计算机层析成像（CT）检测方法 - 中英文版 |
|
|
|
|
GB/T 28872-2012 Testing method of magnetic lightly-striking mode atomic force microscope for nanotopography of living cells 活细胞样品纳米结构的磁驱动轻敲模式原子力显微镜检测方法 - 中英文版 |
|
|
|
|
GB/T 9452-2012 Testing method for working zone of heat treatment furnace 热处理炉有效加热区测定方法 - 中英文版 |
|
|
|
|
GB/T 28487-2012 Precious metal alloys chains - Determination of tensile strength - Method of tensile testing 贵金属及其合金链 抗拉强度的测定 拉伸试验法 - 中英文版 |
|
|
|
|
GB/T 27765-2011 Testing methods of SiO2, TiO2, Fe3O4 and Al2O3 nanoparticles biological effect by transmission electron microscope (TEM) SiO2、TiO2、Fe3O4及Al2O3纳米颗粒生物效应的透射电子显微镜检测方法 - 中英文版 |
|
|
|
|
GB/T 26919-2011 Coal preparation plant - Methods for the natural falling testing of slurry 选煤厂 煤泥水自然沉降试验方法 - 中英文版 |
|
|
|
|
GB/T 14057.2-2011 Decontamination of radioactively contaminated surface - Part 2：Testing method of decontamination agents for textiles 放射性污染表面去污 第2部分：纺织品去污剂的试验方法 - 中英文版 |
|
|
|
|
GB/T 25013-2010 Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements,methods of testing and required test result 船舶和海上技术 高速船夜视仪 操作与性能要求、试验方法和要求的试验结果 - 中英文版 |
|
|
|
|
GB/T 14144-2009 Testing method for determination of radial interstitial oxygen variation in silicon 硅晶体中间隙氧含量径向变化测量方法 - 中英文版 |
|
|
|
|
GB/T 24324-2009 Pulps - Preparation of laboratory sheets for physical testing - Conventional sheet-former method 纸浆 物理试验用实验室纸页的制备 常规纸页成型器法 - 中英文版 |
|
|
|
|
GB/T 23902-2009 Non-destructive testing - Ultrasonic examination - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities 无损检测 超声检测 超声衍射声时技术检测和评价方法 - 中英文版 |
|
|
|
|
GB/T 5170.14-2009 Inspection methods for basic parameters of environmental testing equipments - Electrodynamic vibrating type machines for vibration(sinusoidal) test 环境试验设备基本参数检验方法 振动（正弦）试验用电动振动台 - 中英文版 |
|
|
|
|
GB/T 21956.4-2009 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分：后置式动态试验方法 - 中英文版 |
|
|
|
|
GB/T 14018-2009 Method of testing nail holding power of wood 木材握钉力试验方法 - 中英文版 |
|
|
|
|
GB/T 22906.7-2008 Testing of cores - Part 7: Determination of flexural modulus by the three-point method 纸芯的测定 第7部分：弹性模量的测定（三点法） - 中英文版 |
|
|
|
|
GB/T 22906.3-2008 Testing of cores - Part 3: Determination of moisture content using the oven drying method 纸芯的测定 第3部分：水分含量的测定（烘箱干燥法） - 中英文版 |
|
|
|
|
GB/T 13823.20-2008 Methods for the calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods 振动与冲击传感器校准方法 加速度计谐振测试 通用方法 - 中英文版 |
|
|
|
|
GB/T 6384-2008 The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 - 中英文版 |
|
|
|
|
GB/T 8167-2008 Testing method of dynamic compression for packaging cushioning materials 包装用缓冲材料动态压缩试验方法 - 中英文版 |
|
| Find out:75Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
