China Plastics - Determina GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 15597.2-2024 Plastics - Polymethyl methacrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination 塑料-聚甲基丙烯酸甲酯（PMMA）-模塑和挤出材料-第2部分：试样制备和性能测定 - 中英文版 |
 |
|
|
|
GB/T 43287-2023 Plastics Determination of the degree of disintegration of plastic materials in the marine environment under actual field conditions 塑料 在实际野外条件海洋环境中塑料材料崩解度的测定 - 中英文版 |
|
|
|
|
GB/T 43282.2-2023 Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer. 塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分：采用测定密闭呼吸计内需氧量的方法 - 中英文版 |
|
|
|
|
GB/T 43282.1-2023 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分：采用分析释放二氧化碳的方法 - 中英文版 |
|
|
|
|
GB/T 43275-2023 Screening and determination of antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium in toy plastics by energy dispersive X-ray fluorescence spectrometry 玩具塑料中锑、砷、钡、镉、铬、铅、汞、硒元素的筛选测定 能量色散X射线荧光光谱法 - 中英文版 |
|
|
|
|
GB/T 43355-2023 Determination of antiviral activity on surfaces of plastics and other non-porous materials 塑料和其他无孔材料表面抗病毒活性的测定 - 中英文版 |
|
|
|
|
GB/T 43316.6-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 - 中英文版 |
|
|
|
|
GB/T 43316.5-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 - 中英文版 |
|
|
|
|
GB/T 43316.4-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 - 中英文版 |
|
|
|
|
GB/T 43316.3-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 - 中英文版 |
|
|
|
|
GB/T 43316.2-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile load method 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 - 中英文版 |
|
|
|
|
GB/T 43316.1-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 1: General principles 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 - 中英文版 |
|
|
|
|
GB/T 42918.2-2023 Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination 塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 31402-2023 Determination of antimicrobial activity on surfaces of plastics and other non-porous materials 塑料和其他无孔材料表面抗菌活性的测定 - 中英文版 |
|
|
|
|
GB/T 21461.2-2023 Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 43086-2023 Plastics Polymer dispersions Determination of sieve residue 塑料 聚合物分散体 筛余物的测定 - 中英文版 |
|
|
|
|
GB/T 43085-2023 Plastics Polymer dispersions Determination of free formaldehyde content 塑料 聚合物分散体 游离甲醛含量的测定 - 中英文版 |
|
|
|
|
GB/T 43084.2-2023 Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 2: Specimen preparation and property determination 塑料 含氟聚合物分散体、模塑和挤出材料 第2部分:试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 1630.2-2023 Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 - 中英文版 |
|
|
|
|
GB/T 12598-2023 Plastics Ion exchange resin Determination of sphericity rate after grinding and sphericity rate after grinding 塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定 - 中英文版 |
|
|
|
|
GB/T 42924.4-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter. 塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法 - 中英文版 |
|
|
|
|
GB/T 42924.1-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用 - 中英文版 |
|
|
|
|
GB/T 42922-2023 Plastics - Determination of organic solvent extractables - Chemical methods 塑料 有机溶剂可萃取物的测定 化学方法 - 中英文版 |
|
|
|
|
GB/T 42919.6-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology 塑料 导热系数和热扩散系数的测定 第6部分：基于温度调制技术的比较法 - 中英文版 |
|
|
|
|
GB/T 42919.4-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method 塑料 导热系数和热扩散系数的测定 第4部分:激光闪光法 - 中英文版 |
|
|
|
|
GB/T 42919.3-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法 - 中英文版 |
|
|
|
|
GB/T 42919.1-2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles 塑料 导热系数和热扩散系数的测定 第1部分:通则 - 中英文版 |
|
|
|
|
GB/T 33061.7-2023 Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法 - 中英文版 |
|
|
|
|
GB/T 33061.6-2023 Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method 塑料 动态力学性能的测定 第6部分：非共振剪切振动法 - 中英文版 |
|
|
|
|
GB/T 33061.5-2023 Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法 - 中英文版 |
|
|
|
|
GB/T 33061.4-2023 Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method 塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法 - 中英文版 |
|
|
|
|
GB/T 7139-2023 Plastics. Homopolymers and copolymers of vinyl chloride. Determination of chlorine content. 塑料 氯乙烯均聚物和共聚物 氯含量的测定 - 中英文版 |
|
|
|
|
GB/T 1040.2-2022 Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 - 中英文版 |
|
|
|
|
GB/T 41639-2022 Plastics Determination of disintegration rate of plastic materials under laboratory-scale simulated composting conditions 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 - 中英文版 |
|
|
|
|
GB/T 2546.2-2022 Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Specimen preparation and property determination 塑料 聚丙烯(PP)模塑和挤出材料 第2部分:试样制备和性能测定 - 中英文版 |
|
|
|
|
GB/T 18743.2-2022 Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 - 中英文版 |
|
|
|
|
GB/T 18743.1-2022 Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 - 中英文版 |
|
|
|
|
GB/T 41489-2022 Plastics polyamide determination by gas chromatography ε- Caprolactam and ω- Dodecalactam 塑料 聚酰胺 气相色谱法测定ε-己内酰胺和ω-十二内酰胺 - 中英文版 |
|
|
|
|
GB/T 41926-2022 Plastics - Determination of 1,2-ethylene glycol content in epoxy resins 塑料 环氧树脂 1,2-乙二醇含量的测定 - 中英文版 |
|
|
|
|
GB/T 41928-2022 Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 - 中英文版 |
|
|
|
|
GB/T 41932-2022 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 - 中英文版 |
|
|
|
|
GB/T 41933-2022 Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法 - 中英文版 |
|
|
|
|
GB/T 41934-2022 Plastics - Determination of vertical flame spread of films and sheets 塑料 薄膜和薄片垂直火焰蔓延的测定 - 中英文版 |
|
|
|
|
GB/T 2406.3-2022 Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 - 中英文版 |
|
|
|
|
GB/T 11546.2-2022 Plastics - Determination of creep properties - Part 2: Three-point bending creep 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变 - 中英文版 |
|
|
|
|
GB/T 19466.5-2022 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 - 中英文版 |
|
|
|
|
GB/T 41936.2-2022 Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物 - 中英文版 |
|
|
|
|
GB/T 41936.1-2022 Plastics - Determination of torsional stiffness of flexible materials - Part 1: General method 塑料 柔性材料扭转刚度的测定 第1部分:通用方法 - 中英文版 |
|
|
|
|
GB/T 33061.11-2022 Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度 - 中英文版 |
|
|
|
|
GB/T 41937-2022 Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性 - 中英文版 |
|
| Find out:334Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 |
+86-755-2583-1330
