China Plastics - Methods f GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 43288-2023 Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. 塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法 - 中英文版 |
 |
|
|
|
GB/T 43282.1-2023 Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分：采用分析释放二氧化碳的方法 - 中英文版 |
|
|
|
|
GB/T 41312.3-2023 Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 - 中英文版 |
|
|
|
|
GB/T 43297-2023 Plastics—Methods for evaluating photoaging properties of polymers—Fourier transform infrared spectroscopy and UV/visible spectroscopy 塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法 - 中英文版 |
|
|
|
|
GB/T 42922-2023 Plastics - Determination of organic solvent extractables - Chemical methods 塑料 有机溶剂可萃取物的测定 化学方法 - 中英文版 |
|
|
|
|
GB/T 42764-2023 Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 - 中英文版 |
|
|
|
|
GB/T 18743.1-2022 Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 - 中英文版 |
|
|
|
|
GB/T 16422.3-2022 Plastics - laboratory light source exposure test methods - Part 3: fluorescent ultraviolet lamps 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 - 中英文版 |
|
|
|
|
GB/T 1038.2-2022 Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 - 中英文版 |
|
|
|
|
GB/T 1038.1-2022 Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 - 中英文版 |
|
|
|
|
GB/T 40440-2021 Plastics—Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS,AEPDS and ASA)—Requirements and test methods 塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 39937-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 39936-2021 Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 - 中英文版 |
|
|
|
|
GB/T 3681.2-2021 Plastics—Methods of exposure to solar radiation—Part 2: Direct weathering and exposure behind window glass 塑料 太阳辐射暴露试验方法 第2部分：直接自然气候老化和暴露在窗玻璃后气候老化 - 中英文版 |
|
|
|
|
GB/T 3681.1-2021 Plastics—Methods of exposure to solar radiation—Part 1: General guidance 塑料 太阳辐射暴露试验方法 第1部分：总则 - 中英文版 |
|
|
|
|
GB/T 41061-2021 Test methods for creep properties of fiber reinforced plastics 纤维增强塑料蠕变性能试验方法 - 中英文版 |
|
|
|
|
GB/T 40872-2021 Plastics—Test methods of polyethylene cellular 塑料 聚乙烯泡沫试验方法 - 中英文版 |
|
|
|
|
GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials 塑料 材料生物分解试验用样品制备方法 - 中英文版 |
|
|
|
|
GB/T 25156-2020 General specifications and inspection methods of rubber and plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 - 中英文版 |
|
|
|
|
GB/T 16422.1-2019 Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 - 中英文版 |
|
|
|
|
GB/T 16422.1-2019 Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 - 中英文版 |
|
|
|
|
GB/T 35382-2017 Test methods for energy consumption of blow moulding machines for plastics 塑料中空成型机能耗检测方法 - 中英文版 |
|
|
|
|
GB/T 33580-2017 Testing and measuring methods of energy consumption for rubber and plastics extruder 橡胶塑料挤出机能耗检测方法 - 中英文版 |
|
|
|
|
GB/T 16422.4-2014 Plastics―Methods of exposure to laboratory light sources―Part 4：Open-flame carbon-arc lamps 塑料 实验室光源暴露试验方法 第4部分：开放式碳弧灯 - 中英文版 |
|
|
|
|
GB/T 16422.3-2014 Plastics―Methods of exposure to laboratory light sources―Part 3: Fluorescent UV lamps 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 - 中英文版 |
|
|
|
|
GB/T 16422.2-2014 Plastics―Methods of exposure to laboratory light sources―Part 2：Xenon-arc sources 塑料 实验室光源暴露试验方法 第2部分：氙弧灯 - 中英文版 |
|
|
|
|
GB 29993-2013 Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 - 中英文版 |
|
|
|
|
GB/T 27797.4-2013 Fibre-reinforced plastics - Methods of producing test plates - Part 4：Moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 - 中英文版 |
|
|
|
|
GB/T 29883-2013 Packaging for dangerous goods - Rigid plastics intermediate bulk containers - Methods of exposure to laboratory light sources（fluorescence UV lamp） 危险品包装 刚性塑料中型散装容器 实验室光源（荧光紫外灯）暴露法 - 中英文版 |
|
|
|
|
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法 - 中英文版 |
|
|
|
|
GB/T 3681-2011 Plastics methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors 塑料 自然日光气候老化、玻璃过滤后日光气候老化和菲涅耳镜加速日光气候老化的暴露试验方法 - 中英文版 |
|
|
|
|
GB/T 27797.9-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分：GMT/STC模塑 - 中英文版 |
|
|
|
|
GB/T 27797.8-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 - 中英文版 |
|
|
|
|
GB/T 27797.7-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 - 中英文版 |
|
|
|
|
GB/T 27797.6-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分：拉挤模塑 - 中英文版 |
|
|
|
|
GB/T 27797.5-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding 纤维增强塑料 试验板制备方法 第5部分：缠绕成型 - 中英文版 |
|
|
|
|
GB/T 27797.3-2011 Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 - 中英文版 |
|
|
|
|
GB/T 27797.2-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑 - 中英文版 |
|
|
|
|
GB/T 27797.1-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分：通则 - 中英文版 |
|
|
|
|
GB/T 27797.11-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 - 中英文版 |
|
|
|
|
GB/T 27797.10-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 - 中英文版 |
|
|
|
|
GB/T 1033.3-2010 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method 塑料 非泡沫塑料密度的测定 第3部分：气体比重瓶法 - 中英文版 |
|
|
|
|
GB/T 1033.2-2010 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method 塑料 非泡沫塑料密度的测定 第2部分：密度梯度柱法 - 中英文版 |
|
|
|
|
GB/T 25157-2010 Inspections methods of injection moulding machines for rubber and plastics 橡胶塑料注射成型机检测方法 - 中英文版 |
|
|
|
|
GB/T 23296.1-2009 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南 - 中英文版 |
|
|
|
|
GB/T 9345.1-2008 Plastics - Determination of ash - Part 1: General methods 塑料 灰分的测定 第1部分：通用方法 - 中英文版 |
|
|
|
|
GB/T 7141-2008 Plastics - Methods of heat aging 塑料热老化试验方法 - 中英文版 |
|
|
|
|
GB/T 16582-2008 Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods 塑料 用毛细管法和偏光显微镜法测定部分结晶聚合物熔融行为（熔融温度或熔融范围） - 中英文版 |
|
|
|
|
GB/T 1033.1-2008 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method 塑料 非泡沫塑料密度的测定 第1部分：浸渍法、液体比重瓶法和滴定法 - 中英文版 |
|
|
|
|
GB/T 21333-2008 Cellular plastics,rigid - Test methods for self-skinned,high-density materials 硬质泡沫塑料 自结皮高密度材料试验方法 - 中英文版 |
|
| Find out:56Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
