China Qualification test o GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 40424-2021 Welding procedure qualification test for tubes to tube-plate joints 管与管板的焊接工艺评定试验 - 中英文版 |
 |
|
|
|
GB/T 40079-2021 Classification system and qualification procedures for fugitive emission type testing of valves 阀门逸散性试验分类和鉴定程序 - 中英文版 |
|
|
|
|
GB/T 41123.3-2021 Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification 无损检测 工业射线计算机层析成像检测 第3部分：验证 - 中英文版 |
|
|
|
|
GB/T 41113-2021 Qualification testing of brazers and brazing operators 硬钎焊工和硬钎焊操作工技能评定 - 中英文版 |
|
|
|
|
GB/T 40801-2021 Welding procedure qualification tests for titanium,zirconium and their alloys 钛、锆及其合金的焊接工艺评定试验 - 中英文版 |
|
|
|
|
GB/T 39312-2020 Welding procedure qualification test for copper and its alloys 铜及铜合金的焊接工艺评定试验 - 中英文版 |
|
|
|
|
GB/T 22720.2-2019 Rotating electrical machines—Qualification tests for the partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters 旋转电机 电压型变频器供电的旋转电机耐局部放电电气绝缘结构（Ⅱ型）的鉴定试验 - 中英文版 |
|
|
|
|
GB/T 36234-2018 Qualification testing of welders for fusion welding ontitanium and titanium alloys，zirconium and zirconium alloys 钛及钛合金、锆及锆合金熔化焊焊工技能评定 - 中英文版 |
|
|
|
|
GB/T 36439-2018 Non-destructive testing—Certification and qualification of aerospace NDT personnel 无损检测 航空无损检测人员资格鉴定与认证 - 中英文版 |
|
|
|
|
GB/T 22720.1-2017 Rotating electrical machines—Qualification and quality control tests of partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters 旋转电机 电压型变频器供电的旋转电机无局部放电（Ⅰ型）电气绝缘结构的鉴别和质量控制试验 - 中英文版 |
|
|
|
|
GB/T 34828-2017 Acoustics—Test methods for the qualification of free-field environments 声学 自由场环境评定测试方法 - 中英文版 |
|
|
|
|
GB/T 33645-2017 Welding procedure qualification test for laser-arc hybrid welding of steels, nickel and nickel alloys 钢、镍及镍合金的激光-电弧复合焊接工艺评定试验 - 中英文版 |
|
|
|
|
GB/T 9445-2015 Non-destructive testing—Qualification and certification of NDT personnel 无损检测 人员资格鉴定与认证 - 中英文版 |
|
|
|
|
GB/T 32257-2015 Qualification testing of welders for fusion welding on nickel and nickel alloys 镍及镍合金熔化焊焊工技能评定 - 中英文版 |
|
|
|
|
GB/Z 32075-2015 Non-destructive testing—Discontinuities in specimens for use in qualification examinations 无损检测 资格鉴定考试用试样中的不连续 - 中英文版 |
|
|
|
|
GB/T 32080-2015 Non-destructive testing—Qualification of personnel for limited application of non-destructive testing 无损检测 有限应用无损检测的人员资格鉴定 - 中英文版 |
|
|
|
|
GB/T 30563-2014 Qualification test of welders―Fusion welding for copper and copper alloys 铜及铜合金熔化焊焊工技能评定 - 中英文版 |
|
|
|
|
GB/Z 22720.2-2013 Rotating electrical machines―Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters 旋转电机 电压型变频器供电的旋转电机耐局部放电电气绝缘结构（Ⅱ型）的鉴别和认可试验 - 中英文版 |
|
|
|
|
GB/T 19869.2-2012 Welding procedure qualification test for aluminum and its alloys 铝及铝合金的焊接工艺评定试验 - 中英文版 |
|
|
|
|
GB/T 28266-2012 Non-destructive testing of pressure equipment - Qualification of radiographic film digitization systems 承压设备无损检测 射线胶片数字化系统的鉴定方法 - 中英文版 |
|
|
|
|
GB/T 26141.2-2010 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements 无损检测 射线照相底片数字化系统的质量鉴定 第2部分：最低要求 - 中英文版 |
|
|
|
|
GB/T 26141.1-2010 Non-destructive testing - Qualification of radiographic film digitisation systems - Part1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control 无损检测 射线照相底片数字化系统的质量鉴定 第1部分：定义、像质参数的定量测量、标准参考底片和定性控制 - 中英文版 |
|
|
|
|
GB/T 24598-2009 Qualification test of welders - Fusion welding for aluminium and aluminium alloys 铝及铝合金熔化焊焊工技能评定 - 中英文版 |
|
|
|
|
GB/T 22720.1-2008 Rotating electrical machines - Qualification and type tests for - Type Ⅰelectrical insulation systems used in rotating electrical machines fed from voltage converters 旋转电机 电压型变频器供电的旋转电机 Ⅰ型电气绝缘结构的鉴别和型式试验 - 中英文版 |
|
|
|
|
GB/T 9445-2008 Non-destructive testing - Qualification and certification of personnel 无损检测 人员资格鉴定与认证 - 中英文版 |
|
|
|
|
GB/T 21356-2008 Non-destructive testing - Qualification and long-term stability of computed radiology systems 无损检测 计算机射线照相系统的长期稳定性与鉴定方法 - 中英文版 |
|
|
|
|
GB/T 19869.1-2005 Welding procedure qualification test for steels,nickel and nickel alloys 钢、镍及镍合金的焊接工艺评定试验 - 中英文版 |
|
|
|
|
GB/T 19868.4-2005 Welding procedure qualification based on pre-production welding test 基于预生产焊接试验的工艺评定 - 中英文版 |
|
|
|
|
GB/T 19868.1-2005 Welding procedure qualification based on tested welding consumables 基于试验焊接材料的工艺评定 - 中英文版 |
|
|
|
|
GB/T 19805-2005 Qualification test of welding operators 焊接操作工 技能评定 - 中英文版 |
|
|
|
|
GB/T 15169-2003 Qualification test of welders--Fusion welding forsteels 钢熔化焊焊工技能评定 - 中英文版 |
|
|
|
|
GB 18463-2001 Physical qualifications for automobile drivers and their test protocol 机动车驾驶员身体条件及其测评要求 - 中英文版 |
|
| Find out:32Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-2583-1330
