China Rubber and rubber la GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 18950-2023 Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 - 中英文版 |
 |
|
|
|
GB/T 42519-2023 Rubber Standard Reference Elastomers (SREs) for characterizing the effect of liquids on vulcanized rubber 橡胶 用于表征液体对硫化橡胶影响的标准参比弹性体（SREs） - 中英文版 |
|
|
|
|
GB/T 18944.2-2022 Flexible cellular polymeric materials—Sponge and expanded cellular rubber products—Specification—Part 2：Mouldings and extrusions 柔性多孔聚合物材料 海绵和发泡橡胶制品 规范 第2部分：模制品与挤出制品 - 中英文版 |
|
|
|
|
GB/T 5568-2022 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 中英文版 |
|
|
|
|
GB/T 22530-2022 Safety requirements for rubber and plastic injection molding machines 橡胶塑料注射成型机安全要求 - 中英文版 |
|
|
|
|
GB/T 42279-2022 Vulcanized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load 硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变 - 中英文版 |
|
|
|
|
GB/T 42162-2022 Raw rubber - Determination of residual monomers and other volatile low molecular weight compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method 生橡胶 毛细管气相色谱测定残留单体和其他挥发性低分子量化合物 热脱附（动态顶空）法 - 中英文版 |
|
|
|
|
GB/T 41945-2022 Rubber and vulcanizate - Determination of metal content by inductively coupled plasma optical emission spectrometry (ICP-OES) 生胶和硫化胶 用电感耦合等离子体发射光谱仪(ICP-OES)测定金属含量 - 中英文版 |
|
|
|
|
GB/T 41940-2022 Rubber - Determination of Viscosity and Stress Relaxation with a Rotorless Closed Shear Rheometer 橡胶 用无转子密闭剪切流变仪测定黏度和应力松弛 - 中英文版 |
|
|
|
|
GB/T 41931-2022 Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 - 中英文版 |
|
|
|
|
GB/T 41942-2022 Natural raw rubber and natural rubber latex - Determination of nitrogen content - Micro Dumas combustion method 天然生胶和天然胶乳 氮含量的测定 微杜马斯燃烧法 - 中英文版 |
|
|
|
|
GB/T 3452.5-2022 O-ring rubber seals for hydraulic and pneumatic use - Part 5: Specification for elastomeric materials 液压气动用O形橡胶密封圈 第5部分：弹性体材料规范 - 中英文版 |
|
|
|
|
GB/T 40719-2021 Rubber,vulcanized or themoplastic—Determination of volume and/or surface resistivity 硫化橡胶或热塑性橡胶 体积和/或表面电阻率的测定 - 中英文版 |
|
|
|
|
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 - 中英文版 |
|
|
|
|
GB/T 38687-2020 Rubber and plastics machinery—Communicating protocol for auxiliary equipment 橡胶塑料机械 外围设备通信协议 - 中英文版 |
|
|
|
|
GB/T 25156-2020 General specifications and inspection methods of rubber and plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 - 中英文版 |
|
|
|
|
GB/T 38533-2020 Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions 橡胶塑料注射成型机 模具固定和联接尺寸 - 中英文版 |
|
|
|
|
GB/T 39719-2020 Field and concentrated natural rubber latices—Determination of magnesium content—Cyanide-free titrimetric method 新鲜和浓缩天然胶乳 镁含量的测定 滴定法（无氰法） - 中英文版 |
|
|
|
|
GB/T 39695-2020 Identification of volatile components of rubber fumes—Thermodesorption and gas chromatographic method with mass spectrometric detection 橡胶烟气中挥发性成分的鉴定 热脱附-气相色谱-质谱法 - 中英文版 |
|
|
|
|
GB/T 39692-2020 Rubber,vulcanized or thermoplastic—Low temperature testing—General introduction and guide 硫化橡胶或热塑性橡胶 低温试验 概述与指南 - 中英文版 |
|
|
|
|
GB/T 39483.2-2020 Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface 橡胶塑料注射成型机 接口 第2部分：数据交换接口 - 中英文版 |
|
|
|
|
GB/T 39483.1-2020 Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 - 中英文版 |
|
|
|
|
GB/T 39327-2020 Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 - 中英文版 |
|
|
|
|
GB/T 39249-2020 Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 - 中英文版 |
|
|
|
|
GB/T 14905-2020 Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 - 中英文版 |
|
|
|
|
GB/T 12585-2020 Rubber, vulcanized or thermoplastic—Rubber sheets and rubber-coated fabrics—Determination of transmission rate of volatile liquids (gravimetric technique) 硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定（质量法） - 中英文版 |
|
|
|
|
GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 - 中英文版 |
|
|
|
|
GB/T 17783-2019 Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 - 中英文版 |
|
|
|
|
GB/T 9576-2019 Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 - 中英文版 |
|
|
|
|
GB/T 37210-2018 Nuclear radiation-resistant inflatable and water-filled rubber sealing products 耐核辐射充气和充水橡胶密封制品 - 中英文版 |
|
|
|
|
GB/T 36804-2018 Liquid silicone rubber—Classification and system nomenclature 液体硅橡胶 分类与系统命名法 - 中英文版 |
|
|
|
|
GB/T 36587-2018 Rubber and plastics machinery—Terminology 橡胶塑料机械 术语 - 中英文版 |
|
|
|
|
GB/T 24131.1-2018 Rubber, raw—Determination of volatile matter content—Part 1:Hot-mill method and oven method 生橡胶 挥发分含量的测定 第1部分：热辊法和烘箱法 - 中英文版 |
|
|
|
|
GB/T 3780.18-2017 Carbon black—Part 18：Standard test methods for evaluation in Natural Rubber(NR) 炭黑 第18部分：在天然橡胶（NR）中的鉴定方法 - 中英文版 |
|
|
|
|
GB/T 5565.2-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 - 中英文版 |
|
|
|
|
GB/T 9574-2017 Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 - 中英文版 |
|
|
|
|
GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 - 中英文版 |
|
|
|
|
GB/T 5565.1-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 - 中英文版 |
|
|
|
|
GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD) - 中英文版 |
|
|
|
|
GB/T 12784-2017 Pressurized kneader for rubber and plastics 橡胶塑料加压式捏炼机 - 中英文版 |
|
|
|
|
GB/T 33580-2017 Testing and measuring methods of energy consumption for rubber and plastics extruder 橡胶塑料挤出机能耗检测方法 - 中英文版 |
|
|
|
|
GB/T 33428-2016 Polyacrylate rubber—General specification and evaluation procedure 聚丙烯酸酯橡胶 通用规范及评价方法 - 中英文版 |
|
|
|
|
GB/T 14853.2-2016 Pelletized carbon black for rubber—Part 2: Determination of fines content and pellet attrition 橡胶用造粒炭黑 第2部分: 细粉含量和颗粒磨损量的测定 - 中英文版 |
|
|
|
|
GB/T 32662-2016 Complete set of pyrolysis equipment for waste rubber and waste plastic to oil 废橡胶废塑料裂解油化成套生产装备 - 中英文版 |
|
|
|
|
GB/T 32476-2016 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 - 中英文版 |
|
|
|
|
GB/T 32456-2015 General specifications for electromagnetic of induction heating energy-saving systems used for rubber and plastics machines 橡胶塑料机械用电磁加热节能系统通用技术条件 - 中英文版 |
|
|
|
|
GB/T 32365-2015 Silicone rubber compound—Classification and system nomenclature 硅橡胶混炼胶 分类与系统命名法 - 中英文版 |
|
|
|
|
GB/T 11210-2014 Rubber, vulcanized or thermoplastic―Antistatic and conductive products―Determination of electrical resistance 硫化橡胶或热塑性橡胶 抗静电和导电制品 电阻的测定 - 中英文版 |
|
|
|
|
GB/T 3512-2014 Rubber, vulcanized or thermoplastic―Accelerated ageing and heat resistance tests 硫化橡胶或热塑性橡胶 热空气加速老化和耐热试验 - 中英文版 |
|
|
|
|
GB/T 30200-2013 Test method for energy consumption of rubber and plastics injection moulding machines 橡胶塑料注射成型机能耗检测方法 - 中英文版 |
|
| Find out:168Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |
+86-755-2583-1330
