China Test conditions of p GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 43766-2024 Technical conditions for safety test environment of intelligent networked vehicles-Part 1: Public roads 智能网联汽车运行安全测试技术要求 - 中英文版 |
 |
|
|
|
GB/T 43289-2023 Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 - 中英文版 |
|
|
|
|
GB/Z 21223.3-2023 Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 - 中英文版 |
|
|
|
|
GB/T 43096-2023 Metal powders. Determination of external specific surface area by powder layer permeability test under steady flow conditions. 金属粉末 稳态流动条件下粉末层透过性试验测定外比表面积 - 中英文版 |
|
|
|
|
GB/T 42764-2023 Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 - 中英文版 |
|
|
|
|
GB/T 42567.1-2023 Reference conditions and procedures for testing transmitters for industrial process measurement Part 1: General procedures for all types of transmitters 工业过程测量变送器试验的参比条件和程序 第1部分：所有类型变送器的通用程序 - 中英文版 |
|
|
|
|
GB/T 1040.2-2022 Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 - 中英文版 |
|
|
|
|
GB/T 18743.2-2022 Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 - 中英文版 |
|
|
|
|
GB/T 18380.34-2022 Fire tests of electric and optical cables under fire conditions - Part 34: vertical flame spread test for vertically mounted bunched wires and cables, class B 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 - 中英文版 |
|
|
|
|
GB/T 18380.33-2022 Fire tests of electric and optical cables under fire conditions - Part 33: vertical flame spread test for vertically mounted bunched wires and cables, class A 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 - 中英文版 |
|
|
|
|
GB/T 18380.32-2022 Fire tests of electric and optical cables under fire conditions - Part 32: vertical flame spread test for vertically mounted bunched wires and cables, class A, f / R 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 - 中英文版 |
|
|
|
|
GB/T 18380.36-2022 Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 - 中英文版 |
|
|
|
|
GB/T 18380.35-2022 Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 - 中英文版 |
|
|
|
|
GB/T 18380.31-2022 Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 - 中英文版 |
|
|
|
|
GB/T 18380.13-2022 Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles 电缆和光缆在火焰条件下的燃烧试验 第13部分：单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落（物）/微粒的试验方法 - 中英文版 |
|
|
|
|
GB/T 40118-2021 Plain bearings—Testing under conditions of hydrodynamic and mixed lubrication in test rigs 滑动轴承 流体动压和混合润滑条件台架试验 - 中英文版 |
|
|
|
|
GB/T 19216.3-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 - 中英文版 |
|
|
|
|
GB/T 19216.2-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 - 中英文版 |
|
|
|
|
GB/T 19216.1-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 - 中英文版 |
|
|
|
|
GB/T 17651.2-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions - Part 2: Test procedure and requirements 电缆或光缆在特定条件下燃烧的烟密度测定 第2部分：试验程序和要求 - 中英文版 |
|
|
|
|
GB/T 17651.1-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions-Part 1:Test apparatus 电缆或光缆在特定条件下燃烧的烟密度测定 第1部分：试验装置 - 中英文版 |
|
|
|
|
GB/T 18400.10-2021 Test conditions for machining centres—Part 10：Evaluation of thermal distortions 加工中心检验条件 第10部分：热变形的评定 - 中英文版 |
|
|
|
|
GB/T 5289.2-2021 Test conditions for testing the accuracy of boring and milling machines with horizontal spindle—Part 2：Machines with movable column and fixed table 卧式铣镗床精度检验条件 第2部分：带移动立柱和固定工作台的机床 - 中英文版 |
|
|
|
|
GB/T 31723.414-2021 Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-14部分：电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法 - 中英文版 |
|
|
|
|
GB/T 31723.413-2021 Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分：电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 - 中英文版 |
|
|
|
|
GB/T 39006-2020 Requirements and test methods of special climate conditions reliability for industrial robots 工业机器人特殊气候环境可靠性要求和测试方法 - 中英文版 |
|
|
|
|
GB/T 38269-2019 Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 - 中英文版 |
|
|
|
|
GB/T 38430-2019 Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 - 中英文版 |
|
|
|
|
GB/T 38269-2019 Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 - 中英文版 |
|
|
|
|
GB/T 37303.1-2019 Ships and marine technology—Manoeuvring of ships—Part 1:General concepts, quantities and test conditions 船舶和海上技术 船舶操纵性 第1部分：基本概念、量与试验条件 - 中英文版 |
|
|
|
|
GB/T 11048-2018 Textiles－Physiological effects－Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) 纺织品 生理舒适性 稳态条件下热阻和湿阻的测定(蒸发热板法) - 中英文版 |
|
|
|
|
GB/T 34880.2-2017 Test conditions for the 5-axis simultaneous machining centers—Part 2: Testing of the accuracy for vertical machine 五轴联动加工中心检验条件 第2部分：立式机床精度检验 - 中英文版 |
|
|
|
|
GB/T 34880.1-2017 Test conditions for the 5-axis simultaneous machining centers—Part 1: Testing of the accuracy for horizontal machine 五轴联动加工中心检验条件 第1部分：卧式机床精度检验 - 中英文版 |
|
|
|
|
GB/T 19362.2-2017 Test conditions for bridge-type milling machines—Testing of the accuracy—Part 2: Travelling bridge (gantry-type) machines 龙门铣床检验条件 精度检验 第2部分：龙门移动式铣床 - 中英文版 |
|
|
|
|
GB/T 16462.5-2017 Test conditions for numerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心检验条件 第5部分：进给率、速度和插补精度检验 - 中英文版 |
|
|
|
|
GB/T 16462.6-2017 Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece 数控车床和车削中心检验条件 第6部分：精加工试件精度检验 - 中英文版 |
|
|
|
|
GB/T 8190.9-2017 Reciprocating internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 - 中英文版 |
|
|
|
|
GB/T 33393-2016 Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions 鞋类 整鞋试验方法 稳态条件下热阻和湿阻的测定 - 中英文版 |
|
|
|
|
GB/T 4854.9-2016 Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分：确定基准听阈级的优选测试条件 - 中英文版 |
|
|
|
|
GB/T 31971.2-2015 Ships and marine technology—Marine environment protection: performance testing of oil skimmers—Part 2: Static water conditions 船舶与海上技术 海上环境保护：撇油器性能试验 第2部分：静态水条件 - 中英文版 |
|
|
|
|
GB/T 31971.1-2015 Ships and marine technology—Marine environment protection：Performance testing of oil skimmers—Part 1: Moving water conditions 船舶与海上技术 海上环境保护：撇油器性能试验 第1部分：动态水条件 - 中英文版 |
|
|
|
|
GB/T 10580-2015 Standard conditions for use prior to and during the testing of solid electrical insulating materials 固体绝缘材料在试验前和试验时采用的标准条件 - 中英文版 |
|
|
|
|
GB/T 31248-2014 Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions 电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法 - 中英文版 |
|
|
|
|
GB/T 2424.27-2013 Environmental testing - Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers 环境试验 支持文件和指南 温湿度试验箱不确定度计算 - 中英文版 |
|
|
|
|
GB/T 19277.2-2013 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量 - 中英文版 |
|
|
|
|
GB/T 5008.1-2013 Lead-acid starter batteries - Part 1: Technical conditions and methods of test 起动用铅酸蓄电池 第1部分: 技术条件和试验方法 - 中英文版 |
|
|
|
|
GB/T 27797.1-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分：通则 - 中英文版 |
|
|
|
|
GB/Z 27753-2011 Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells 质子交换膜燃料电池膜电极工况适应性测试方法 - 中英文版 |
|
|
|
|
GB/T 20159.3-2011 Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environmental tests - Stationary use at weatherprotected locations 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 有气候防护场所固定使用 - 中英文版 |
|
|
|
|
GB/T 26949.10-2011 Industrial trucks - Verification of stability - Part 10: Additional stability tests for trucks operating in the special conditions of stacking with load laterally displaced by powered devices 工业车辆 稳定性验证 第10部分：在由动力装置侧移载荷条件下堆垛作业的附加稳定性试验 - 中英文版 |
|
| Find out:115Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
