China Test method for cros GB Standards Search Result

and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .


	GB/T 44156-2024 Performance requirements and test methods for rear traffic crossing warning system of passenger vehicles 乘用车后方交通穿行提示系统性能要求及试验方法 - 中英文版
	GB/T 13777-2024 Test Method for Maturity of Cotton Fiber-Microscopy 棉纤维成熟度试验方法-显微镜法 - 中英文版
	GB/T 3246.1-2024 Test methods for the organization of deformed aluminum and aluminum alloy products - Part 1: Microstructure test methods 变形铝及铝合金制品组织检验方法-第1部分：显微组织检验方法 - 中英文版
	GB/T 1927.15-2022 Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains 无疵小试样木材物理力学性质试验方法第15部分：横纹抗拉强度测定 - 中英文版
	GB/T 26957-2022 Destructive testing of welds in metallic materials - Tensile test methods for cross joints and lap joints 金属材料焊缝破坏性试验十字接头和搭接接头拉伸试验方法 - 中英文版
	GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets 表面化学分析原子力显微术二硫化钼片层材料厚度测量方法 - 中英文版
	GB/T 5095.2501-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio 电子设备用机电元件基本试验规程及测量方法第25-1部分：试验25a：串扰比 - 中英文版
	GB/T 39081-2020 Test method of cross tension test for resistance spot and embossed projection welds 电阻点焊及凸焊接头的十字拉伸试验方法 - 中英文版
	GB/T 5095.2509-2020 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests－Test 25i: Alien crosstalk 电子设备用机电元件基本试验规程及测量方法第25-9部分：信号完整性试验试验25i：外来串扰 - 中英文版
	GB/T 36965-2018 Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC）光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 - 中英文版
	GB/T 36422-2018 Man-made fiber—Test method for micro morphology and diameter—Scanning electron microscope method 化学纤维微观形貌及直径的测定扫描电镜法 - 中英文版
	GB/T 17737.122-2018 Coaxial communication cables—Part 1-122: Electrical test methods—Test for cross-talk between coaxial cables 同轴通信电缆第1-122部分：电气试验方法同轴电缆间串音试验 - 中英文版
	GB/T 34018-2017 Non-destructive testing—Test method for scanning ultrasonic microscopy 无损检测超声显微检测方法 - 中英文版
	GB/T 33714-2017 Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy 纳米技术纳米颗粒尺寸测量原子力显微术 - 中英文版
	GB/T 32346.1-2015 Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件第1部分：试验方法和要求 - 中英文版
	GB/T 32189-2015 Test method for surface roughness of GaN single crystal substrate by atomic force microscope 氮化镓单晶衬底表面粗糙度的原子力显微镜检验法 - 中英文版
	GB/T 18890.1-2015 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 1: Test methods and requirements 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件第1部分：试验方法和要求 - 中英文版
	GB/T 226-2015 Test method for macrostructure and defect of steel by etching 钢的低倍组织及缺陷酸蚀检验法 - 中英文版
	GB/T 31541-2015 Test method for interfacial bond strength of fine ceramic materials—Cross-bonded 精细陶瓷界面拉伸和剪切粘结强度试验方法十字交叉法 - 中英文版
	GB/T 5594.8-2015 Test methods for properties of structure ceramic used in electronic components and device—Part 8: Test method for microstructure 电子元器件结构陶瓷材料性能测试方法第8部分：显微结构的测定方法 - 中英文版
	GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films 原子力显微镜测量溅射薄膜表面粗糙度的方法 - 中英文版
	GB/T 31226-2014 Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法 - 中英文版
	GB/T 11017.1-2014 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 1: Test methods and requirements 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件第1部分：试验方法和要求 - 中英文版
	GB/T 30834-2014 Standard test methods for rating and classifying inclusions in steel―Scanning Electron Microscope 钢中非金属夹杂物的评定和统计扫描电镜法 - 中英文版
	GB/T 28872-2012 Testing method of magnetic lightly-striking mode atomic force microscope for nanotopography of living cells 活细胞样品纳米结构的磁驱动轻敲模式原子力显微镜检测方法 - 中英文版
	GB/T 27760-2011 Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using si (111) monatomic steps 利用Si（111）晶面原子台阶对原子力显微镜亚纳米高度测量进行校准的方法 - 中英文版
	GB/T 14999.7-2010 Test methods for grain sizes，primary dendrite spacing and microshrinkage of superalloy castings 高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法 - 中英文版
	GB/T 24298-2009 Standard Test method for cross curvature of thermostat metals 热双金属横向弯曲试验方法 - 中英文版
	GB/T 13835.6-2009 Test method for rabbit hair - Part 6: Diameter - Projection microscope method 兔毛纤维试验方法第6部分：直径投影显微镜法 - 中英文版
	GB/T 13777-2006 Test method for maturity of cotton fibres - Microscopic method 棉纤维成熟度试验方法显微镜法 - 中英文版
	GB/T 19816.5-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第5部分:缺陷颗粒百分比和微结构的测定 - 中英文版
	GB/T 1965-1996 Test method for cross-bending strength of porous ceramic 多孔陶瓷弯曲强度试验方法 - 中英文版
	GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe 陶管弯曲强度试验方法 - 中英文版
	GB/T 5441.6-1985 Test methods for communication cable--Crosstalk attenuation test--Comparison method 通信电缆试验方法串音衰减试验比较法 - 中英文版

Find out:34Items | To Page of: First -Previous-Next -Last | 1