China Test methods for pos GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 44037-2024 Test methods for coke dissolution rate and post-dissolution strength 焦炭溶损率及溶损后强度试验方法 - 中英文版 |
 |
|
|
|
GB/T 43725-2024 Test methods for positive photoresist materials for flat panel display arrays 直写成像式曝光设备 - 中英文版 |
|
|
|
|
GB/T 43552-2023 Comfort fans and their speed regulators for household and similar purposes - Performance test methods 家用和类似用途舒适风扇及其调速器 性能测试方法 - 中英文版 |
|
|
|
|
GB/T 43288-2023 Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. 塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法 - 中英文版 |
|
|
|
|
GB/T 42979-2023 Global Navigation Satellite System (GNSS) position reporting/short message terminal performance requirements and test methods 全球卫星导航系统（GNSS）位置报告/短报文型终端性能要求及测试方法 - 中英文版 |
|
|
|
|
GB/T 18950-2023 Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 - 中英文版 |
|
|
|
|
GB/T 42672-2023 Corrosion of metals and alloys - Methods for monitoring environmental factors in surface seawater exposure tests 金属和合金的腐蚀 表层海水暴露试验环境因素监测方法 - 中英文版 |
|
|
|
|
GB/T 42827-2023 Performance test methods for AC ventilating fans and their speed regulators for household and similar purposes 家用和类似用途的交流换气扇及其调速器 性能测试方法 - 中英文版 |
|
|
|
|
GB/T 20632.2-2022 Steel paper for electrical purposes - Part 2: Test methods 电气用钢纸 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 42063-2022 Sharps injury protection requirements and test methods - Sharps injury protection devices for disposable hypodermic needles, interventional catheter guide needles and blood sample collection needles 锐器伤害保护 要求与试验方法 一次性使用皮下注射针、介入导管导引针和血样采集针的锐器伤害保护装置 - 中英文版 |
|
|
|
|
GB/T 13542.2-2021 Plastic films for electrical purposes—Part 2:Methods of test 电气绝缘用薄膜 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 8243.14-2020 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验 - 中英文版 |
|
|
|
|
GB/T 8243.15-2018 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分：复合材料滤清器的振动疲劳试验 - 中英文版 |
|
|
|
|
GB/T 34937-2017 Insulators for overhead lines—Composite suspension and tension insulators for d.c.systems with a nominal voltage greater than 1500 V—Definitions, test methods and acceptance criteria 架空线路绝缘子 标称电压高于1500 V直流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则 - 中英文版 |
|
|
|
|
GB/T 34625-2017 Metallic and other inorganic coatings—Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes—Specification and test methods 金属及其他无机覆盖层 电气、电子和工程用金和金合金电镀层 技术规范和试验方法 - 中英文版 |
|
|
|
|
GB/T 8243.13-2015 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 - 中英文版 |
|
|
|
|
GB/T 4996-2014 General-purpose flat pallets for through transit of goods—Test methods 联运通用平托盘 试验方法 - 中英文版 |
|
|
|
|
GB/T 19519-2014 Insulators for overhead lines―Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000V―Definitions, test methods and acceptance criteria 架空线路绝缘子 标称电压高于1 000 V交流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则 - 中英文版 |
|
|
|
|
GB/T 30735-2014 Test methods for external exposure of roofs and roof coverings to fire 屋顶及屋顶覆盖制品外部对火反应试验方法 - 中英文版 |
|
|
|
|
GB/T 29627.2-2013 Aramid pressboard for electrical purposes - Part 2: Methods of test 电气用聚芳酰胺纤维纸板 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 20629.2-2013 Non-cellulosic paper for electrical purposes - Part 2：Methods of test 电气用非纤维素纸 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 19264.2-2013 Pressboard and presspaper for electrical purposes - Part 2: Methods of test 电气用压纸板和薄纸板 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 29418-2012 Test methods for mechannical and physical properties of wood-plastic composite product 塑木复合材料产品物理力学性能测试 - 中英文版 |
|
|
|
|
GB/T 29417-2012 Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete 水泥砂浆和混凝土干燥收缩开裂性能试验方法 - 中英文版 |
|
|
|
|
GB/T 28289-2012 Test methods for composite performances of aluminium alloy thermal barrier profiles 铝合金隔热型材复合性能试验方法 - 中英文版 |
|
|
|
|
GB/T 27797.10-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 - 中英文版 |
|
|
|
|
GB/T 27662-2011 Test methods for pointing and positional stability of laser beam 激光光束指向和位置稳定性测试方法 - 中英文版 |
|
|
|
|
GB/T 17491-2011 Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance 液压泵、马达和整体传动装置 稳态性能的试验及表达方法 - 中英文版 |
|
|
|
|
GB/T 25774.1-2010 Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验 - 中英文版 |
|
|
|
|
GB/T 25494-2010 Test methods for composition analysis of getters 吸气剂成分分析测试方法 - 中英文版 |
|
|
|
|
GB/T 25096-2010 Composite station post insulators for substations with AC voltages greater than 1000V - Definitions,test methods and acceptance riteria 交流电压高于1000V变电站用电站支柱复合绝缘子 定义、试验方法及接收准则 - 中英文版 |
|
|
|
|
GB/T 24517-2009 Corrosion of metals and alloys - Outdoors exposure test methods for periodic water spray 金属和合金的腐蚀 户外周期喷淋暴露试验方法 - 中英文版 |
|
|
|
|
GB/T 5132.2-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test 电气用热固性树脂工业硬质圆形层压管和棒 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 1310.2-2009 Varnished fabrics for electrical purposes - Part 2: Methods of test 电气用浸渍织物 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 1303.2-2009 Industrial rigid laminated sheets based on thermosetting for electrical purposes - Part 2: Test methods 电气用热固性树脂工业硬质层压板 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 20634.2-2008 Non-impregnated densified laminated wood for electrical purposes - Part 2: Methods of test 电气用非浸渍致密层压木 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 17548-2008 Information technology - Requirements and Guidelines for Test Methods Specification and Test Method implementation for Measuring Conformance to POSIX Standards 信息技术 POSIX标准符合性的测试方法规范和测试方法实现的要求和指南 - 中英文版 |
|
|
|
|
GB/T 21784.2-2008 Laboratory glassware-hydrometer for general purpose - Part 2: Test methods and use 实验室玻璃器皿 通用型密度计 第2部分：试验方法和使用 - 中英文版 |
|
|
|
|
GB/T 21429-2008 Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations 户外和户内电气设备用空心复合绝缘子 定义、试验方法、接收准则和设计推荐 - 中英文版 |
|
|
|
|
GB/T 328.26-2007 Test methods for building sheets for waterproofing - Part 26: Bitumen sheets for waterproofing-dissoulble composite of membrane (impregnated and coated asphalt amount) 建筑防水卷材试验方法 第26部分：沥青防水卷材 可溶物含量（浸涂材料含量） - 中英文版 |
|
|
|
|
GB/T 328.16-2007 Test methods for building sheets for waterproofing - Part 16: Plastic and rubber sheets for waterproofing-exposure to liquid chemicals including water 建筑防水卷材试验方法 第16部分：高分子防水卷材 耐化学液体（包括水） - 中英文版 |
|
|
|
|
GB/T 20671.9-2006 Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials 非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法 - 中英文版 |
|
|
|
|
GB/T 20631.2-2006 Pressure sensitive adhesive tapes for electrical purposes - Part 2: Methods of test 电气用压敏胶粘带 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 20628.2-2006 Cellulosic papers for electrical purposes - Part 2: Methods of test 电气用纤维素纸 第2部分：试验方法 - 中英文版 |
|
|
|
|
GB/T 20142-2006 Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则 - 中英文版 |
|
|
|
|
GB/T 19995.2-2005 Virtue Requirements and Test Methods for Natural Material Sports Fileds -- Part 2：Wooden Floor For Multi-purposes Sport Fields 天然材料体育场地使用要求及检验方法 第2部分: 综合体育场馆木地板场地 - 中英文版 |
|
|
|
|
GB/T 5170.18-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 - 中英文版 |
|
|
|
|
GB/T 5270-2005 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 - 中英文版 |
|
|
|
|
GB/T 6554-2003 Resin based reactive compounds used for electrical insulation--Part 2:Methods of test--Methods for coating pourders for electrical purposes 电气绝缘用树脂基反应复合物 第2部分:试验方法 电气用涂敷粉末方法 - 中英文版 |
|
|
|
|
GB/T 18214.1-2000 Global navigation satellite systems(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards，methods of testing and required test results 全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果 - 中英文版 |
|
| Find out:54Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
