China Verification and cal GB Standards Search Result |
 |
1. Ready translated GB standards
and Chinese version GB Standards, you can purchase directly
in the web page; After receive your payment, we will send
the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB 4789.45-2023 National Food Safety Standard General Principles for Verification of Microbiological Test Methods 食品安全国家标准 微生物检验方法验证通则 - 中英文版 |
 |
|
|
|
GB/T 30256-2023 Energy Savings Measurement and Verification Technical Requirements Motor System 节能量测量和验证技术要求 电机系统 - 中英文版 |
|
|
|
|
GB/T 18779.2-2023 Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification 产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分：GPS测量、测量设备校准和产品验证中的测量不确定度评估指南 - 中英文版 |
|
|
|
|
GB/T 21838.2-2022 Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines 金属材料 硬度和材料参数的仪器化压入试验 第2部分：试验机的检验和校准 - 中英文版 |
|
|
|
|
GB/T 21540-2022 Hydraulic transmissions - On-line automatic particle counting systems for liquids - Calibration and verification methods 液压传动 在线液体自动颗粒计数系统 校准和验证方法 - 中英文版 |
|
|
|
|
GB/T 39777-2021 Technical requirements of measurement and verification of energy savings—Industrial boiler system 节能量测量和验证技术要求 工业锅炉系统 - 中英文版 |
|
|
|
|
GB/T 39693.9-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers 硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证 - 中英文版 |
|
|
|
|
GB/T 40810.2-2021 Geometrical product specifications (GPS)—Online measurement in process—Part 2：Online verifications of geometric features（form and position） 产品几何技术规范（GPS） 生产过程在线测量 第2部分：几何特征（形位）的在线检测与验证 - 中英文版 |
|
|
|
|
GB/T 40810.1-2021 Geometrical product specifications (GPS)—Online measurement in process—Part 1:Online verification of geometric features (size and surface texture) 产品几何技术规范（GPS） 生产过程在线测量 第1部分：几何特征（尺寸、表面结构）的在线检测与验证 - 中英文版 |
|
|
|
|
GB/T 40742.4-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone 产品几何技术规范（GPS） 几何精度的检测与验证 第4部分：尺寸和几何误差评定、最小区域的判别模式 - 中英文版 |
|
|
|
|
GB/T 40742.3-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 3:Functional gauges and fixtures—Verification when applying maximum material requirements and minimum material requirements 产品几何技术规范（GPS） 几何精度的检测与验证 第3部分：功能量规与夹具 应用最大实体要求和最小实体要求时的检测与验证 - 中英文版 |
|
|
|
|
GB/T 40742.2-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 2：Verification of form characteristics, orientation characteristics, position characteristics, run-out characteristics and profile characteristics 产品几何技术规范（GPS） 几何精度的检测与验证 第2部分：形状、方向、位置、跳动和轮廓度特征的检测与验证 - 中英文版 |
|
|
|
|
GB/T 40742.1-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 1:Basic concept and measurement—Symbol,terminology,measuring conditions and procedures 产品几何技术规范（GPS） 几何精度的检测与验证 第1部分：基本概念和测量基础 符号、术语、测量条件和程序 - 中英文版 |
|
|
|
|
GB/T 38760-2020 Geometrical product specifications (GPS)—Features utilized in specification and verification 产品几何技术规范（GPS） 规范和检验中使用的要素 - 中英文版 |
|
|
|
|
GB/T 24637.1-2020 Geometrical product specifications (GPS)—General concepts—Part 1: Model for geometrical specification and verification 产品几何技术规范（GPS） 通用概念 第1部分：几何规范和检验的模型 - 中英文版 |
|
|
|
|
GB/T 16857.901-2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system 产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第901部分：配置多影像探测系统的坐标测量机 - 中英文版 |
|
|
|
|
GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments 产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度 - 中英文版 |
|
|
|
|
GB/T 37016-2018 Technical requirements of measurement and verification about power saving in demand response for power users 电力用户需求响应节约电力测量与验证技术要求 - 中英文版 |
|
|
|
|
GB/T 36412-2018 Verification and calibration of force standard machines 力标准机的检验与校准 - 中英文版 |
|
|
|
|
GB/T 36573-2018 Technical specification for measurement and verification of electric energy and power saving for voltage step-up operation of power line project 电力线路升压运行节约电力电量测量和验证技术规范 - 中英文版 |
|
|
|
|
GB/T 36571-2018 Technical specification for measurement and verification of electric energy and power savings for parallel reactive power compensation project 并联无功补偿节约电力电量测量和验证技术规范 - 中英文版 |
|
|
|
|
GB/T 34874.3-2017 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests 产品几何技术规范（GPS） X射线三维尺寸测量机 第3部分：验收检测和复检检测 - 中英文版 |
|
|
|
|
GB/T 16857.2-2017 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions 产品几何技术规范（GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量线性尺寸的坐标测量机 - 中英文版 |
|
|
|
|
GB/T 34890-2017 Geometrical product specification（GPS）—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system 产品几何技术规范（GPS） 数字摄影三坐标测量系统的验收检测和复检检测 - 中英文版 |
|
|
|
|
GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分：使用单探针或多探针接触式探测系统的坐标测量机 - 中英文版 |
|
|
|
|
GB/T 24276-2017 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation 通过计算进行低压成套开关设备和控制设备温升验证的一种方法 - 中英文版 |
|
|
|
|
GB/Z 34603-2017 Gaseous-media fire-extinguishing systems—Engineered extinguishing systems—Flow calculation implementation method and flow verification and testing for approval 气体灭火系统 预设计 流量计算方法及验证试验 - 中英文版 |
|
|
|
|
GB/T 27417-2017 Conformity assessment—Guidance on validation and verification of chemical analytical methods 合格评定 化学分析方法确认和验证指南 - 中英文版 |
|
|
|
|
GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion 化学分析方法验证确认和内部质量控制实施指南 基于样品消解的金属组分分析 - 中英文版 |
|
|
|
|
GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography 化学分析方法验证确认和内部质量控制实施指南 色谱分析 - 中英文版 |
|
|
|
|
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports 化学分析方法验证确认和内部质量控制实施指南 报告定性结果的方法 - 中英文版 |
|
|
|
|
GB/T 35285-2017 Information security technology—Public key infrastructure—Technical requirements for digital certificate based reliable electronic signature creation and verification 信息安全技术 公钥基础设施 基于数字证书的可靠电子签名生成及验证技术要求 - 中英文版 |
|
|
|
|
GB/T 32660.2-2016 Metallic materials—Webster hardness test—Part 2: Verification and calibration of hardness testers 金属材料 韦氏硬度试验 第2部分：硬度计的检验与校准 - 中英文版 |
|
|
|
|
GB/T 32666.3-2016 High grade and popular numerical control systems of machine tool—Part 3: Requirements and verification specifications for A.C. servo device 高档与普及型机床数控系统 第3部分：交流伺服驱动装置的要求及验收规范 - 中英文版 |
|
|
|
|
GB/T 32666.2-2016 High grade and popular numerical control system of machine tool—Part 2: Requirements and verification specifications for spindle drive device 高档与普及型机床数控系统 第2部分：主轴驱动装置的要求及验收规范 - 中英文版 |
|
|
|
|
GB/T 32666.1-2016 High-grade and popular numerical control system of machine tool—Part 1: Requirements and verification specifications for numerical control device 高档与普及型机床数控系统 第1部分: 数控装置的要求及验收规范 - 中英文版 |
|
|
|
|
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis—Terms and definitons 化学分析方法验证确认和内部质量控制 术语及定义 - 中英文版 |
|
|
|
|
GB/T 32465-2015 Requirement for verification & validation of detection methods and internal quality control on chemical analysis 化学分析方法验证确认和内部质量控制要求 - 中英文版 |
|
|
|
|
GB/T 31593.1-2015 Fire safety engineering—Part 1: Assessment, verification and validation of calculation methods 消防安全工程 第1部分：计算方法的评估、验证和确认 - 中英文版 |
|
|
|
|
GB/T 31349-2014 Technical requirements of measurement and verification of energy savings—Central air-conditioning system 节能量测量和验证技术要求 中央空调系统 - 中英文版 |
|
|
|
|
GB/T 31348-2014 Technical requirements of measurement and verification of energy savings—Lighting system 节能量测量和验证技术要求 照明系统 - 中英文版 |
|
|
|
|
GB/T 31347-2014 Technical requirements of measurement and verification of energy savings—Communication room project 节能量测量和验证技术要求 通信机房项目 - 中英文版 |
|
|
|
|
GB/T 31346-2014 Technical requirements of measurement and verification of energy savings—Waste heat power generation project in cement production 节能量测量和验证技术要求 水泥余热发电项目 - 中英文版 |
|
|
|
|
GB/T 31345-2014 Technical requirements of measurement and verification of energy savings, heating system project for residential building 节能量测量和验证技术要求 居住建筑供暖项目 - 中英文版 |
|
|
|
|
GB/T 31344-2014 Technical requirements of measurement and verification of energy savings—Slab reheating furnace system 节能量测量和验证技术要求 板坯加热炉系统 - 中英文版 |
|
|
|
|
GB/Z 30993-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use―Conformity verification report for GB 4793.1-2007 测量、控制和实验室用电气设备的安全要求 GB 4793.1-2007的符合性验证报告格式 - 中英文版 |
|
|
|
|
GB/T 30559.1-2014 Energy performance of lifts, escalators and moving walks—Part 1: Energy measurement and verification 电梯、自动扶梯和自动人行道的能量性能 第1部分：能量测量与验证 - 中英文版 |
|
|
|
|
GB/T 30542-2014 Document management―Monitoring and verification of information stored on 130 mm optical media 文件管理 130mm光盘存储信息的监测和验证 - 中英文版 |
|
|
|
|
GB/T 30257-2013 Technical requirements of measurement and verification of energy savings, fan system 节能量测量和验证技术要求 通风机系统 - 中英文版 |
|
|
|
|
GB/T 30256-2013 Technical requirements of measurement and verification of energy savings,pumped liquid delivery system 节能量测量和验证技术要求 泵类液体输送系统 - 中英文版 |
|
| Find out:70Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
