China Determination of app GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 43610-2023 Microbeam analysis Analytical electron microscopy Transmission electron microscopy method for Determination of apparent growth direction of linear crystals 微束分析 分析电子显微术 线状晶体表观生长方向的透射电子显微术测定方法 - 英文版 |
 |
|
|
GB/T 18950-2023 Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 - 英文版 |
|
|
|
GB/T 6609.25-2023 Methods for chemical analysis and determination of physical properties of alumina - Part 25: Determination of loose and tapped density 氧化铝化学分析方法和物理性能测定方法 第25部分：松装和振实密度的测定 - 英文版 |
|
|
|
GB/T 42924.1-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用 - 英文版 |
|
|
|
GB/T 1094.101-2023 Power transformers - Part 101: Determination of sound levels - Application guidelines 电力变压器 第101部分：声级测定 应用导则 - 英文版 |
|
|
|
GB/T 12967.6-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第6部分：色差和外观质量 - 英文版 |
|
|
|
GB/T 19889.2-2022 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2 : Determination and application of measurement uncertainties 声学 建筑和建筑构件隔声测量 第2部分：测量不确定度评定和应用 - 英文版 |
|
|
|
GB/T 39693.8-2022 Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度 - 英文版 |
|
|
|
GB/T 39693.7-2022 Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度 - 英文版 |
|
|
|
GB/T 6538-2022 Determination of apparent viscosity of engine oil - Cold start simulator method 发动机油表观黏度的测定 冷启动模拟机法 - 英文版 |
|
|
|
GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第2部分：高温时流速的测定 - 英文版 |
|
|
|
GB/T 40280-2021 Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 - 英文版 |
|
|
|
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第1部分：高温时松装密度的测定 - 英文版 |
|
|
|
GB/T 39821-2021 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 - 英文版 |
|
|
|
GB/T 39500-2020 Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area 皮革 物理和机械试验 视密度和单位面积质量的测定 - 英文版 |
|
|
|
GB/T 24328.2-2020 Tissue paper and tissue products—Part 2: Determination of thickness, bulking thickness and apparent bulk density and bulk 卫生纸及其制品 第2部分: 厚度、层积厚度、表观层积紧度和松厚度的测定 - 英文版 |
|
|
|
GB/T 39693.6-2020 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度 - 英文版 |
|
|
|
GB/Z 6113.403-2020 Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3: Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance of mass-produced products 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分：不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑 - 英文版 |
|
|
|
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 - 英文版 |
|
|
|
GB/T 3781.6-2019 Acetylene black—Part 6：Determination of apparent specific volume 乙炔炭黑 第6部分：视比容的测定 - 英文版 |
|
|
|
GB/T 1546-2018 Pulp—Determination of Kappa number 纸浆-卡伯值的测定 - 英文版 |
|
|
|
GB/T 17248.3-2018 Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections 声学-机器和设备发射的噪声-采用近似环境修正测定工作位置和其他指定位置的发射声压级 - 英文版 |
|
|
|
GB/T 17248.5-2018 Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections 声学-机器和设备发射的噪声-采用准确环境修正测定工作位置和其他指定位置的发射声压级 - 英文版 |
|
|
|
GB/T 1479.3-2017 Metallic powders－Determination of apparent density－Part 3: Oscillating funnel method 金属粉末 松装密度的测定 第3部分：振动漏斗法 - 英文版 |
|
|
|
GB/T 34180-2017 Thermal insulation products for building applications—Determination of the resistance to impact of external thermal insulation composite systems(ETICS) 建筑用绝热制品 外墙外保温系统抗冲击性测定 - 英文版 |
|
|
|
GB/T 34011-2017 Thermal insulation products for building applications—Determination of the pull-off resistance of external thermal insulation composite systems(ETICS)(foam block test) 建筑用绝热制品 外墙外保温系统抗拉脱性能的测定（泡沫块试验） - 英文版 |
|
|
|
GB/T 13477.3-2017 Test method for building sealants—Part 3：Determination of extrudability of sealants using standardized apparatus 建筑密封材料试验方法 第3部分：使用标准器具测定密封材料挤出性的方法 - 英文版 |
|
|
|
GB/T 35160.1-2017 Test methods for agglomerated stone—Part 1：Determination of apparent density and water absorption 合成石材试验方法 第1部分：密度和吸水率的测定 - 英文版 |
|
|
|
GB/T 33002-2016 Thermal insulating products for building applications—Determination of deformation under specified compressive load and temperature conditions 建筑用绝热制品 在规定压缩载荷和温度条件下变形的测定 - 英文版 |
|
|
|
GB/T 33001-2016 Thermal insulating products for building applications—Determination of bending behaviour 建筑用绝热制品 弯曲性能的测定 - 英文版 |
|
|
|
GB/T 33011-2016 Thermal insulating products for building applications—Determination of freeze-thaw resistance 建筑用绝热制品 抗冻融性能的测定 - 英文版 |
|
|
|
GB/T 33157-2016 Thermal insulating products for building applications—Determination of tensile strength parallel to faces 建筑用绝热制品 与面平行拉伸强度的测定 - 英文版 |
|
|
|
GB/T 33158-2016 Thermal insulating products for building applications—Determination of behaviour under cyclic loading 建筑用绝热制品 循环载荷性能的测定 - 英文版 |
|
|
|
GB/T 32983-2016 Thermal insulating products for building applications—Determination of compressive creep 建筑用绝热制品 压缩蠕变性能的测定 - 英文版 |
|
|
|
GB/T 3810.3-2016 Test methods of ceramic tiles—Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density 陶瓷砖试验方法 第3部分：吸水率、显气孔率、表观相对密度和容重的测定 - 英文版 |
|
|
|
GB/T 9097-2016 Sintered metal materials，excluding hardmetals—Determination of apparent hardness and mincrohardness 烧结金属材料（不包括硬质合金） 表观硬度和显微硬度的测定 - 英文版 |
|
|
|
GB/T 32382-2015 Thermal insulating products for build applications—Determination of shear behaviour 建筑用绝热制品 剪切性能的测定 - 英文版 |
|
|
|
GB/T 32371.4-2015 Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application—Part 4: Determination of volatile diisocyanates 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第4部分：挥发性二异氰酸酯的测定 - 英文版 |
|
|
|
GB/T 32371.3-2015 Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 3: Determination of volatile aldehydes 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第3部分：挥发性醛类化合物的测定 - 英文版 |
|
|
|
GB/T 32371.2-2015 Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 2: Determination of volatile organic compound 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第2部分：挥发性有机化合物的测定 - 英文版 |
|
|
|
GB/T 31911-2015 Methods for determination of emissions from appliances burning gaseous fuels 燃气燃烧器具排放物测定方法 - 英文版 |
|
|
|
GB/T 21877-2015 Dyestuffs and intermediate of dyes—Determination of tapping density 染料及染料中间体 堆积密度的测定 - 英文版 |
|
|
|
GB/T 31057.1-2014 Granular materials―The physical properties―Part 1: Determination of apparent density 颗粒材料 物理性能测试 第1部分：松装密度的测量 - 英文版 |
|
|
|
GB/T 30807-2014 Thermal insulating products for building applications―Determination of long-term water absorption by immersion 建筑用绝热制品 浸泡法测定长期吸水性 - 英文版 |
|
|
|
GB/T 30806-2014 Thermal insulating products for building applications—Determination of dimensional stability under specified temperature and humidity conditions 建筑用绝热制品 在指定温度湿度条件下尺寸稳定性的测试方法 - 英文版 |
|
|
|
GB/T 30805-2014 Thermal insulating products for building applications—Determination of short term water absorption by partial immersion 建筑用绝热制品 部分浸入法测定短期吸水量 - 英文版 |
|
|
|
GB/T 30804-2014 Thermal insulating products for building applications―Determination of tensile strength perpendicular to faces 建筑用绝热制品 垂直于表面抗拉强度的测定 - 英文版 |
|
|
|
GB/T 30803-2014 Thermal insulation products for building applications—Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material 建筑用绝热制品 绝热材料与粘结剂和基底涂层的拉伸粘结强度的测定 - 英文版 |
|
|
|
GB/T 30802-2014 Thermal insulating products for building applications—Determination of behaviour under point load 建筑用绝热制品 点载荷性能的测定 - 英文版 |
|
|
|
GB/T 30749-2014 The apparent density determination of mineral medicine and calcined products 矿物药材及其煅制品视密度测定方法 - 英文版 |
|
| Find out:129Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
