China Test conditions for GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 44155-2024 Steel forgings-Test frequency, sampling conditions and test methods for mechanical properties tests 钢锻件-力学性能试验的检测频次、取样条件和试验方法 - 英文版 |
 |
|
|
GB/T 19960-2024 Wind power generation system - General technical conditions and test methods for wind turbines 风能发电系统-风力发电机组通用技术条件和试验方法 - 英文版 |
|
|
|
GB/T 43766-2024 Technical conditions for safety test environment of intelligent networked vehicles-Part 1: Public roads 智能网联汽车运行安全测试技术要求 - 英文版 |
|
|
|
GB/T 10739-2023 Paper, paperboard and pulp Standard atmospheric conditions for specimen handling and testing 纸、纸板和纸浆 试样处理和试验的标准大气条件 - 英文版 |
|
|
|
GB/T 43289-2023 Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 - 英文版 |
|
|
|
GB/T 5008.1-2023 Lead-acid batteries for starting use Part 1: Technical conditions and test methods 起动用铅酸蓄电池 第1部分：技术条件和试验方法 - 英文版 |
|
|
|
GB/Z 21223.3-2023 Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 - 英文版 |
|
|
|
GB/T 42567.3-2023 Reference conditions and procedures for testing transmitters for industrial process measurement Part 3: Specific procedures for temperature transmitters 工业过程测量变送器试验的参比条件和程序 第3部分：温度变送器的特定程序 - 英文版 |
|
|
|
GB/T 42567.2-2023 Reference conditions and procedures for testing transmitters for industrial process measurement Part 2: Specific procedures for pressure transmitters 工业过程测量变送器试验的参比条件和程序 第2部分：压力变送器的特定程序 - 英文版 |
|
|
|
GB/T 42567.1-2023 Reference conditions and procedures for testing transmitters for industrial process measurement Part 1: General procedures for all types of transmitters 工业过程测量变送器试验的参比条件和程序 第1部分：所有类型变送器的通用程序 - 英文版 |
|
|
|
GB/T 42613-2023 Plain bearings - Tests for bearing materials - Resistance to corrosion by lubricants under static conditions 滑动轴承 轴承材料试验 静态条件下抗润滑剂腐蚀能力 - 英文版 |
|
|
|
GB/T 1040.2-2022 Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 - 英文版 |
|
|
|
GB/T 18743.2-2022 Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: Test conditions for pipes of different materials 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 - 英文版 |
|
|
|
GB/T 18380.34-2022 Fire tests of electric and optical cables under fire conditions - Part 34: vertical flame spread test for vertically mounted bunched wires and cables, class B 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 - 英文版 |
|
|
|
GB/T 18380.33-2022 Fire tests of electric and optical cables under fire conditions - Part 33: vertical flame spread test for vertically mounted bunched wires and cables, class A 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 - 英文版 |
|
|
|
GB/T 18380.32-2022 Fire tests of electric and optical cables under fire conditions - Part 32: vertical flame spread test for vertically mounted bunched wires and cables, class A, f / R 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 - 英文版 |
|
|
|
GB/T 18380.36-2022 Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 - 英文版 |
|
|
|
GB/T 18380.35-2022 Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 - 英文版 |
|
|
|
GB/T 18380.31-2022 Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 - 英文版 |
|
|
|
GB/T 18380.13-2022 Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles 电缆和光缆在火焰条件下的燃烧试验 第13部分：单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落（物）/微粒的试验方法 - 英文版 |
|
|
|
GB/T 18380.12-2022 Tests on electric and optical fibre cables under fire conditions—Part 12:Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 kW pre-mixed flame 电缆和光缆在火焰条件下的燃烧试验 第12部分：单根绝缘电线电缆火焰垂直蔓延试验 1 kW 预混合型火焰试验方法 - 英文版 |
|
|
|
GB/T 18380.11-2022 Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第11部分：单根绝缘电线电缆火焰垂直蔓延试验 试验装置 - 英文版 |
|
|
|
GB/T 42284.5-2022 Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 5: Chemical loads 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第5部分：化学负荷 - 英文版 |
|
|
|
GB/T 42284.4-2022 Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 4: Climatic loads 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第4部分：气候负荷 - 英文版 |
|
|
|
GB/T 42284.3-2022 Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 3: Mechanical loads 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第3部分：机械负荷 - 英文版 |
|
|
|
GB/T 42284.1-2022 Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 1: General provisions 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第1部分：一般规定 - 英文版 |
|
|
|
GB/T 19216.3-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 - 英文版 |
|
|
|
GB/T 19216.2-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 - 英文版 |
|
|
|
GB/T 19216.1-2021 Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 - 英文版 |
|
|
|
GB/T 18400.10-2021 Test conditions for machining centres—Part 10：Evaluation of thermal distortions 加工中心检验条件 第10部分：热变形的评定 - 英文版 |
|
|
|
GB/T 5289.2-2021 Test conditions for testing the accuracy of boring and milling machines with horizontal spindle—Part 2：Machines with movable column and fixed table 卧式铣镗床精度检验条件 第2部分：带移动立柱和固定工作台的机床 - 英文版 |
|
|
|
GB/T 39006-2020 Requirements and test methods of special climate conditions reliability for industrial robots 工业机器人特殊气候环境可靠性要求和测试方法 - 英文版 |
|
|
|
GB/T 38430-2019 Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 - 英文版 |
|
|
|
GB/T 34880.2-2017 Test conditions for the 5-axis simultaneous machining centers—Part 2: Testing of the accuracy for vertical machine 五轴联动加工中心检验条件 第2部分：立式机床精度检验 - 英文版 |
|
|
|
GB/T 34880.1-2017 Test conditions for the 5-axis simultaneous machining centers—Part 1: Testing of the accuracy for horizontal machine 五轴联动加工中心检验条件 第1部分：卧式机床精度检验 - 英文版 |
|
|
|
GB/T 19362.2-2017 Test conditions for bridge-type milling machines—Testing of the accuracy—Part 2: Travelling bridge (gantry-type) machines 龙门铣床检验条件 精度检验 第2部分：龙门移动式铣床 - 英文版 |
|
|
|
GB/T 18271.2-2017 Process measurement and control devices—General methods and procedures for evaluating performance—Part 2:Tests under reference conditions 过程测量和控制装置 通用性能评定方法和程序 第2部分：参比条件下的试验 - 英文版 |
|
|
|
GB/T 16462.3-2017 Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分：倒置立式机床几何精度检验 - 英文版 |
|
|
|
GB/T 16462.2-2017 Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心检验条件 第2部分：立式机床几何精度检验 - 英文版 |
|
|
|
GB/T 16462.5-2017 Test conditions for numerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心检验条件 第5部分：进给率、速度和插补精度检验 - 英文版 |
|
|
|
GB/T 16462.6-2017 Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece 数控车床和车削中心检验条件 第6部分：精加工试件精度检验 - 英文版 |
|
|
|
GB/T 8190.9-2017 Reciprocating internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 - 英文版 |
|
|
|
GB/T 33393-2016 Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions 鞋类 整鞋试验方法 稳态条件下热阻和湿阻的测定 - 英文版 |
|
|
|
GB/T 18859-2016 Enclosed low-voltage switchgear and controlgear assemblies—Guide for testing under conditions of arcing due to internal fault 封闭式低压成套开关设备和控制设备 在内部故障引起电弧情况下的试验导则 - 英文版 |
|
|
|
GB/T 9359-2016 Basic conditions and methods of environmental test for hydrological instrument 水文仪器基本环境试验条件及方法 - 英文版 |
|
|
|
GB/T 4854.9-2016 Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred Test conditions for the determination of reference hearing threshold levels 声学 校准测听设备的基准零级 第9部分：确定基准听阈级的优选测试条件 - 英文版 |
|
|
|
GB/T 31971.2-2015 Ships and marine technology—Marine environment protection: performance testing of oil skimmers—Part 2: Static water conditions 船舶与海上技术 海上环境保护：撇油器性能试验 第2部分：静态水条件 - 英文版 |
|
|
|
GB/T 31971.1-2015 Ships and marine technology—Marine environment protection：Performance testing of oil skimmers—Part 1: Moving water conditions 船舶与海上技术 海上环境保护：撇油器性能试验 第1部分：动态水条件 - 英文版 |
|
|
|
GB/T 10580-2015 Standard conditions for use prior to and during the testing of solid electrical insulating materials 固体绝缘材料在试验前和试验时采用的标准条件 - 英文版 |
|
|
|
GB/T 31248-2014 Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions 电缆或光缆在受火条件下火焰蔓延、热释放和产烟特性的试验方法 - 英文版 |
|
| Find out:144Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-2583-1330
