China Determination of har GB Standards Search Result

and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .


	GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve 金属材料压入试验强度、硬度和应力-应变曲线的测定 - 英文版
	GB/T 20708-2019 Limit and determination of parts of harmful substances in textile dyeing and finishing auxiliaries 纺织染整助剂产品中部分有害物质的限量及测定 - 英文版
	GB/T 23901.5-2019 Non-destructive testing—Image quality of radiographs—Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators 无损检测射线照相检测图像质量第5部分：双丝型像质计图像不清晰度的测定 - 英文版
	GB/T 37039-2018 Determination of harmful solvent in dye products 染料产品中有害溶剂含量的测定 - 英文版
	GB/T 37185-2018 Gas analysis—Determination of indoor harmful volatile organic compounds—"SUMMA canister and silonite tube" and chromatography/mass spectrometry（GC/MS）气体分析-室内挥发性有害有机物的测定SUMMA罐-硅烷化管采样气相色谱/质谱联用（GC/MS）法 - 英文版
	GB/T 2408-2008/XG1-2018 Plastics - Determination of burning characteristics - Horizontal and vertical test 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 - 英文版
	GB/T 6909-2018 Analysis of water used in boiler and cooling system—Determination of hardness 锅炉用水和冷却水分析方法硬度的测定 - 英文版
	GB/T 3488.2-2018 Hardmetals—Metallographic determination of microstructure—Part 2：Measurement of WC grain size 硬质合金显微组织的金相测定第2部分：WC晶粒尺寸的测量 - 英文版
	GB/T 36532-2018 Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料热固性模塑料和预浸料固化特性测定 - 英文版
	GB/T 5167-2018 Sintered metal materials and hardmetals—Determination of electrical resistivity 烧结金属材料和硬质合金电阻率的测定 - 英文版
	GB/T 36590-2018 Method for chemical analysis of high purity silver—Determination of trace impurity elements contents—Glow discharge mass spectrometry 高纯银化学分析方法痕量杂质元素的测定辉光放电质谱法 - 英文版
	GB/T 36056-2018 Method for analysis of forestry biomass—Determination of soluble saccharides content 林业生物质原料分析方法可溶性糖的测定 - 英文版
	GB/T 36058-2018 Method for analysis of forestry biomas—Determination of insoluble saccharides content 林业生物质原料分析方法不可溶性糖测定 - 英文版
	GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test 塑料简支梁冲击性能的测定第2部分：仪器化冲击试验 - 英文版
	GB/T 35818-2018 Standard method for analysis of forestry biomass－Determination of structural polysaccharides and lignin 林业生物质原料分析方法多糖及木质素含量的测定 - 英文版
	GB/T 6881.2-2017 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for small movable sources in reverberant fields—Comparison method for a hard-walled test room 声学声压法测定噪声源声功率级和声能量级混响场内小型可移动声源工程法硬壁测试室比较法 - 英文版
	GB/T 34848-2017 Determination of shrinkage character for heat-shrinkable films 热收缩薄膜收缩性能试验方法 - 英文版
	GB/T 5124.3-2017 Hardmetals—Part 3：Determination of cobalt—Potentiometric method 硬质合金化学分析方法第3部分：钴量的测定电位滴定法 - 英文版
	GB/T 5124.4-2017 Hardmetals—Part 4：Determination of titanium content—Photometric peroxide method 硬质合金化学分析方法第4部分：钛量的测定过氧化氢分光光度法 - 英文版
	GB/T 34615-2017 Determination of combustion characteristics of CMSW for coprocessing in cement kiln 水泥窑协同处置的生活垃圾预处理可燃物燃烧特性检测方法 - 英文版
	GB/T 3848-2017 Hardmetals—Determination of (the magnetization) coercivity 硬质合金矫顽（磁）力测定方法 - 英文版
	GB/T 34209-2017 Stainless steel—Determination of multi-element contents—Glow discharge optical emission spectrometry 不锈钢多元素含量的测定辉光放电原子发射光谱法 - 英文版
	GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD) 硫化橡胶或热塑性橡胶硬度的测定(10IRHD~100IRHD) - 英文版
	GB/T 14513.1-2017 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow 气动使用可压缩流体元件的流量特性测定第1部分：稳态流动的一般规则和试验方法 - 英文版
	GB/T 33236-2016 Polycrystalline silicon—Determination of trace elements—Glow discharge mass spectrometry method 多晶硅痕量元素化学分析辉光放电质谱法 - 英文版
	GB/T 15789-2016 Geotextiles and geotextile-related products—Determination of water permeability characteristics normal to the plane，without load 土工布及其有关产品无负荷时垂直渗透特性的测定 - 英文版
	GB/T 33051-2016 Optical functional films—Superficial hardening film—Determination of thickness of hardening coating 光学功能薄膜表面硬化薄膜硬化层厚度测定方法 - 英文版
	GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method) 碳素钢和中低合金钢多元素含量的测定火花放电原子发射光谱法（常规法） - 英文版
	GB/T 32524.2-2016 Acoustics—Determination of sound power level and directivity character of power capacitor using sound pressure—Part 2: Engineering methods for an essentially free field over a reflecting plane 声学声压法测定电力电容器单元的声功率级和指向特性第2部分：反射面上方近似自由场的工程法 - 英文版
	GB/T 32524.1-2016 Acoustics—Determination of sound power level and directivity character of power capacitor unit using sound pressure—Part 1: Precision method for hemi-anechoic rooms 声学声压法测定电力电容器单元的声功率级和指向特性第1部分：半消声室精密法 - 英文版
	GB/T 9097-2016 Sintered metal materials，excluding hardmetals—Determination of apparent hardness and mincrohardness 烧结金属材料（不包括硬质合金）表观硬度和显微硬度的测定 - 英文版
	GB/T 3850-2015 Impermeable sintered metal materials and hardmetals—Determination of density 致密烧结金属材料与硬质合金密度测定方法 - 英文版
	GB/T 3489-2015 Hardmetals—Metallographic determination of porosity and uncombined carbon 硬质合金孔隙度和非化合碳的金相测定 - 英文版
	GB/T 31926-2015 Zinc and aluminum based coatings on steel sheets and strips—Determination of lead，cadmium and chromium contens—Glow discharge atomic emission spectrometry method 钢板及钢带锌基和铝基镀层中铅、镉和铬含量的测定辉光放电原子发射光谱法 - 英文版
	GB/T 5159-2015 Metallic powders，excluding powders for hardmetals—Determination of dimensional changes associated with compacting and sintering 金属粉末（不包括硬质合金用粉）与成型和烧结有联系的尺寸变化的测定方法 - 英文版
	GB/T 3851-2015 Hardmetals—Determination of transverse rupture strength 硬质合金横向断裂强度测定方法 - 英文版
	GB/T 11886-2015 Silver jewellery alloys—Determination of sliver—Volhard method 银合金首饰银含量的测定伏尔哈特法 - 英文版
	GB/T 31532-2015 Determination of acesulfame potassium and sodium saccharin in toothpaste—High performance liquid chromatography 牙膏中丁磺氨钾和糖精钠的测定高效液相色谱法 - 英文版
	GB/T 30661.2-2014 Wheelchair seating―Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity―Seat cushions 轮椅车座椅第2部分：维持组织完整性装置的物理和机械特性测定座垫 - 英文版
	GB/T 30647-2014 Determination of harmful elements total content of coatings 涂料中有害元素总含量的测定 - 英文版
	GB/T 3488.1-2014 Hardmetals―Metallographic determination of microstructure―Part 1：Photomicrographs and description 硬质合金显微组织的金相测定第1部分：金相照片和描述 - 英文版
	GB/T 29493.9-2014 Determination of harmful substances in textile dyeing and finishing auxiliaries―Part 9: Determination of acrylamide 纺织染整助剂中有害物质的测定第9部分: 丙烯酰胺的测定 - 英文版
	GB/T 30823-2014 Nickel-alloy probe test method for determination cooling characteristics of industrial quenching oil 测定工业淬火油冷却性能的镍合金探头试验方法 - 英文版
	GB/T 2565-2014 Determination of grindability index of coal―Hardgrove method 煤的可磨性指数测定方法哈德格罗夫法 - 英文版
	GB/T 30390-2013 Determination of monosaccharide and disaccharide in oil seeds—High-performance liquid chromatography 油料种籽中果糖、葡萄糖、蔗糖含量的测定高效液相色谱法 - 英文版
	GB 19601-2013 Limit and determination of 23 harmful aromatic amines in dye products 染料产品中23种有害芳香胺的限量及测定 - 英文版
	GB/T 29493.8-2013 Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 8: Determination of residual monomers in polyacrylate 纺织染整助剂中有害物质的测定第8部分：聚丙烯酸酯类产品中残留单体的测定 - 英文版
	GB/T 29493.7-2013 Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 7: Determination of monomeric diisocyanates in polyurethane coating agent 纺织染整助剂中有害物质的测定第7部分：聚氨酯涂层整理剂中二异氰酸酯单体的测定 - 英文版
	GB/T 29493.6-2013 Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 6: Determination of isocyanate groups in polyurethane prepolymers 纺织染整助剂中有害物质的测定第6部分：聚氨酯预聚物中异氰酸酯基含量的测定 - 英文版
	GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法触针法 - 英文版

Find out:228Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5