China Test methods for par GB Standards Search Result

and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .


	GB/T 19995.1-2005 Virtue Requirements and Test Methods for Natural Material Sports Fileds -- Part 1：Natural turf for Football Courts 天然材料体育场地使用要求及检验方法第1部分：足球场地天然草面层 - 英文版
	GB/T 14233.2-2005 Infusion,transfusion,injection equipment for medical use -- Part 2: Biological test methods 医用输液、输血、注射器具检验方法第2部分：生物学试验方法 - 英文版
	GB/T 19973.2-2005 Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process 医用器材的灭菌微生物学方法第二部分：确认灭菌过程的无菌试验 - 英文版
	GB/T 20033.2-2005 Technical Requirements and Test Methods for Artificilal Material Sport Fileds -- Part 2: Tennis Courts 人工材料体育场地使用要求及检验方法第2部分：网球场地 - 英文版
	GB/T 5170.18-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法温度/ 湿度组合循环试验设备 - 英文版
	GB/T 19816.7-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第7部分:含水量的测定 - 英文版
	GB/T 19816.6-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第6部分:外来杂质的测定 - 英文版
	GB/T 19816.5-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第5部分:缺陷颗粒百分比和微结构的测定 - 英文版
	GB/T 5170.20-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments 电工电子产品环境试验设备基本参数检定方法水试验设备 - 英文版
	GB/T 5170.19-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments 电工电子产品环境试验设备基本参数检定方法温度/振动(正弦)综合试验设备 - 英文版
	GB/T 5170.17-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备基本参数检定方法低温/低气压/湿热综合顺序试验设备 - 英文版
	GB/T 2423.28-2005 Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering 电工电子产品环境试验第2部分：试验方法试验T：锡焊 - 英文版
	GB/T 2423.27-2005 Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test 电工电子产品环境试验第2部分：试验方法试验Z/AMD：低温/低气压/湿热连续综合试验 - 英文版
	GB/T 10066.11-2005 Test methods for electroheat installations Part 11:Submerged-arc furnaces 电热装置的试验方法第11部分：埋弧炉 - 英文版
	GB/T 10066.10-2005 Test methods for electroheat installtions Part 10:Direct arc furnaces 电热装置的试验方法第10部分：直接电弧炉 - 英文版
	GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第4部分:表观密度的测定 - 英文版
	GB/T 19816.3-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第3部分:硬度的测定 - 英文版
	GB/T 19816.2-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第2部分:颗粒尺寸分布的测定 - 英文版
	GB/T 19816.1-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第1部分:抽样 - 英文版
	GB/T 4857.11-2005 Packaging-Basic tests for transport packages-Part 11:Horizontal impact test methods 包装运输包装件基本试验第11部分:水平冲击试验方法 - 英文版
	GB/T 15812.1-2005 Catheters other than intravascular catheters-Part 1:Test methods for common properties 非血管内导管第1部分:一般性能试验方法 - 英文版
	GB/T 5170.16-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test 电工电子产品环境试验设备基本参数检定方法稳态加速度试验用离心机 - 英文版
	GB/T 5170.15-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备基本参数检定方法振动(正弦)试验用液压振动台 - 英文版
	GB/T 5170.13-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备基本参数检定方法振动(正弦)试验用机械振动台 - 英文版
	GB/T 2423.54-2005 Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination 电工电子产品环境试验第2部分:试验方法试验Xc：流体污染 - 英文版
	GB/T 2423.53-2005 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands 电工电子产品环境试验第2部分:试验方法试验Xb：由手的磨擦造成标记和印刷文字的磨损 - 英文版
	GB/T 10066.4-2004 Test methods for electroheat installations--Part 4:Indirect resistance furnaces 电热设备的试验方法第4部分:间接电阻炉 - 英文版
	GB/T 6609.23-2004 Chemical analysis methods and determination of physical performance of alumina--Preparation andstorage of test samples 氧化铝化学分析方法和物理性能测定方法试样的制备和贮存 - 英文版
	GB/T 10066.1-2004 Test methods for electroheat installations--Part 1:General 电热设备的试验方法第1部分:通用部分 - 英文版
	GB/T 18802.21-2004 Low-voltage surge protective devices--Part 21:Surge protective devices connected to telecommunications and signalling networks--Performance requirements and testing methods 低压电涌保护器第21部分:电信和信号网络的电涌保护器(SPD)----性能要求和试验方法 - 英文版
	GB/T 15623.2-2003 Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 2:Test methods for three-way directional flow control valves 液压传动电调制液压控制阀第2部分:三通方向流量控制阀试验方法 - 英文版
	GB/T 15623.1-2003 Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 1:Test methods for four-way directional flow control valves 液压传动电调制液压控制阀第1部分:四通方向流量控制阀试验方法 - 英文版
	GB/T 2423.52-2003 Environmental testing for electric and electronic products--Part 2:Test methods--Test 77:Body strength and impact shock 电工电子产品环境试验第2部分:试验方法试验77:结构强度与撞击 - 英文版
	GB/T 6554-2003 Resin based reactive compounds used for electrical insulation--Part 2:Methods of test--Methods for coating pourders for electrical purposes 电气绝缘用树脂基反应复合物第2部分:试验方法电气用涂敷粉末方法 - 英文版
	GB/T 775.2-2003 Test method for insulators--Part2: Electrical test methods 绝缘子试验方法第2部分: 电气试验方法 - 英文版
	GB/T 1001.1-2003 Insulators for overhead lines with a nominal voltage above 1000V--Part 1: Ceramic or glass insulator units for a.c.systems--Definitions，test methods and acceptance criteria 标称电压高于1000V的架空线路绝缘子第1部分:交流系统用瓷或玻璃绝缘子元件定义、试验方法和判定准则 - 英文版
	GB/T 8243.4-2003 Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency，life and cumulative efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法第4部分: 原始滤清效率、寿命和累积效率(重量法) - 英文版
	GB/T 8243.3-2003 Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法第3部分: 耐高压差和耐高温特性 - 英文版
	GB/T 8243.2-2003 Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 2: Element by-pass valve characteristics 内燃机全流式机油滤清器试验方法第2部分: 滤芯旁通阀特性 - 英文版
	GB/T 8243.1-2003 Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 1: Differential pressure/flow characteristics 内燃机全流式机油滤清器试验方法第1部分:压差-流量特性 - 英文版
	GB/T 5137.3-2002 Road vehicles--Safety glazing materials--Part 3:Test methods for resistance to radiation，high temperature，humidity，fire and simulated weathering 汽车安全玻璃试验方法第3部分:耐辐照高温潮湿燃烧和耐模拟气候试验 - 英文版
	GB/T 5137.2-2002 Road vehicles--Safety glazing materials--Part 2:Test methods for optical properties 汽车安全玻璃试验方法第2部分:光学性能试验 - 英文版
	GB/T 5137.1-2002 Road vehicles--Safety glazing materials--Part 1:Test methods for mechanical properties 汽车安全玻璃试验方法第1部分:力学性能试验 - 英文版
	GB/T 14634.4-2002 Test methods of rare earth three-band phosphors for fluorescent lamps--Determination of particle size distribution by electric sensing zone technique 灯用稀土三基色荧光粉试验方法电传感法粒度分布测定 - 英文版
	GB/T 603-2002 Chemical reagent--Preparations of reagent solutions for use in test methods 化学试剂试验方法中所用制剂及制品的制备 - 英文版
	GB/T 16656.34-2002 Industrial automation systems and integration--Product data representation and exchange--Part 34:Conformance testing methodology and framework:Abstract test methods for application protocol implementations 工业自动化系统与集成产品数据的表达与交换第34部分:一致性测试方法论与框架:应用协议实现的抽象测试方法 - 英文版
	GB/T 5591.2-2002 Combined flexible materials for electrical insulation--Part 2:Methods for test 电气绝缘用柔软复合材料第2部分:试验方法 - 英文版
	GB/T 18711-2002 Magnetite for use in coal preparation--Test methods 选煤用磁铁矿粉试验方法 - 英文版
	GB/T 6881.3-2002 Acoustics--Determination of sound power levels of noise sources-using sound pressure--Engineering methods for small，movable sources in reverberant fields--Part 2:Methods for special reverberation test rooms 声学声压法测定噪声源声功率级混响场中小型可移动声源工程法第2部分:专用混响测试室法 - 英文版
	GB/T 6881.2-2002 Acoustics--Determination of sound power levels of noise sources--Engineering methods for small，movable sources in reverberant field--Part 1:Comparison method for hard-walled test rooms 声学声压法测定噪声源声功率级混响场中小型可移动声源工程法第1部分:硬壁测试室比较法 - 英文版

Find out:1000Items | To Page of: First -Previous-Next -Last | [13] [14] [15] [16] [17] [18] [19]