China Internal combustion GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 15548-2008 General specification for three-phase synchronous generators driven by reciprocating Internal combustion engine 往复式内燃机驱动的三相同步发电机通用技术条件 - 英文版 |
 |
|
|
GB/T 725-2008 Internal combustion engines - Nomenclature and code of designations 内燃机产品名称和型号编制规则 - 英文版 |
|
|
|
GB/T 12773-2008 Valve steel and superalloy bars for Internal combustion engines 内燃机气阀用钢及合金棒材 - 英文版 |
|
|
|
GB 20800.3-2008 General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust 爆炸性环境用往复式内燃机防爆技术通则 第3部分：存在甲烷和（或）可燃性粉尘的地下矿区巷道用I类内燃机 - 英文版 |
|
|
|
GB/T 6072.1-2008 Reciprocating Internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use 往复式内燃机 性能 第1部分：功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求 - 英文版 |
|
|
|
GB/T 21406-2008 Internal combustion engines - Engine weight (mass) declaration 内燃机 发动机的重量（质量）标定 - 英文版 |
|
|
|
GB/T 21404-2008 Internal combustion engine - Determination and method for the measurement of engine power - General requirements 内燃机 发动机功率的确定和测量方法 一般要求 - 英文版 |
|
|
|
GB/T 20969.4-2008 Special environmental condition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines 特殊环境条件 高原机械 第4部分：高原自然环境试验导则 内燃动力机械 - 英文版 |
|
|
|
GB/T 21428-2008 Reciprocating Internal combustion engine driven generating sets - Safety 往复式内燃机驱动的发电机组 安全性 - 英文版 |
|
|
|
GB/T 21427-2008 Special environmental condition - Requirements and test methods for electric powerplant with Internal combustion engines in dry heat-desert 特殊环境条件 干热沙漠对内燃机电站系统的技术要求及试验方法 - 英文版 |
|
|
|
GB/T 21426-2008 Special environmental condition - Requirements for electric power plant with Internal combustion engines on plateau 特殊环境条件 高原对内燃机电站的要求 - 英文版 |
|
|
|
GB/T 21425-2008 Low-noise electric power plant with Internal combustion engine for general specification 低噪声内燃机电站噪声指标要求及测量方法 - 英文版 |
|
|
|
GB/T 21156.1-2007 Special environmental condition - Machinery for desert - Part 1: Internal combustion engines on dry heat-desert condition 特殊环境条件 沙漠机械 第1部分：干热沙漠内燃动力机械 - 英文版 |
|
|
|
GB/T 20969.1-2007 Special environmental condition - Machinery for plateau - Part 1: Requirements for Internal combustion engines on plateau 特殊环境条件 高原机械 第1部分：高原对内燃动力机械的要求 - 英文版 |
|
|
|
GB/T 8243.12-2007 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：采用颗粒计数法测定滤清效率和容灰量 - 英文版 |
|
|
|
GB/T 8243.11-2007 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法 第11部分：自净式滤清器 - 英文版 |
|
|
|
GB/T 6809.4-2007 Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems 往复式内燃机 零部件和系统术语 第4部分：增压及进排气管系统 - 英文版 |
|
|
|
GB/T 1147.2-2007 Small and medium power Internal combustion engines - Part 2: Test methods 中小功率内燃机 第2部分：试验方法 - 英文版 |
|
|
|
GB/T 1147.1-2007 Small and medium power Internal combustion engines - Part 1：General requirements 中小功率内燃机 第1部分：通用技术条件 - 英文版 |
|
|
|
GB/T 8243.7-2006 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 7: Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 - 英文版 |
|
|
|
GB/T 8190.6-2006 Reciprocating Internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test 往复式内燃机 排放测量 第6部分：测量结果和试验报告 - 英文版 |
|
|
|
GB/T 20787-2006 Reciprocating Internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet 往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范 - 英文版 |
|
|
|
GB 20800.2-2006 General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 2: Group Ⅱengines for use in flammable dust atmospheres 爆炸性环境用往复式内燃机防爆技术通则 第2部分：可燃性粉尘环境用Ⅱ类内燃机 - 英文版 |
|
|
|
GB 20800.1-2006 General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 1: Group Ⅱengines for use in flammable gas and vapor atmospheres 爆炸性环境用往复式内燃机防爆技术通则 第1部分：可燃性气体和蒸汽环境用 Ⅱ类内燃机 - 英文版 |
|
|
|
GB 20651.1-2006 Reciprocating Internal combustion engines - Safety - Part 1: Compression ignition engines 往复式内燃机 安全 第1部分：压燃式发动机 - 英文版 |
|
|
|
GB/T 20420-2006 Lubricants, industrial oils and related products (class L)-Family E (Internal combustion engine oils)-Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) 润滑剂、工业用油和相关产品（L类）-E组（内燃机油）-二冲程汽油发动机油（EGB、EGC和EGD） - 英文版 |
|
|
|
GB/T 12786-2006 Automatic electric power plant with Internal combustion engines for general specification 自动化内燃机电站通用技术条件 - 英文版 |
|
|
|
GB/T 8243.6-2006 Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 - 英文版 |
|
|
|
GB/T 8243.5-2006 Methods of test for full-flow lubricating oil filters for Internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test 内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验 - 英文版 |
|
|
|
GB/T 20064.2-2006 Reciprocating Internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement 往复式内燃机 手柄起动装置 第2部分：脱开角试验方法 - 英文版 |
|
|
|
GB/T 20064.1-2006 Reciprocating Internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 - 英文版 |
|
|
|
GB/T 1883.2-2005 Reciprocating Internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance 往复式内燃机 词汇 第2部分：发动机维修术语 - 英文版 |
|
|
|
GB/T 1883.1-2005 Reciprocating Internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation 往复式内燃机 词汇 第1部分：发动机设计和运行术语 - 英文版 |
|
|
|
GB/T 20024-2005 Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 - 英文版 |
|
|
|
GB/T 3821-2005 Small and medium power Internal combustion engines-Cleanliness measurement 中小功率内燃机清洁度测定方法 - 英文版 |
|
|
|
GB/T 8188-2003 Internal combustion engine--Emissions terminology and nomenclature 内燃机 排放术语和定义 - 英文版 |
|
|
|
GB/T 6072.5-2003 Reciprocating Internal combustion engines--Performance--Part 5: Torsional vibrations 往复式内燃机 性能 第5部分: 扭转振动 - 英文版 |
|
|
|
GB/T 4672-2003 Reciprocating Internal combustion engines--Hand-operated control devices--Standard direction of motion 往复式内燃机 手操纵控制机构 标准动作方向 - 英文版 |
|
|
|
GB/T 8243.4-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 4: Initial particle retention efficiency，life and cumulative efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法) - 英文版 |
|
|
|
GB/T 8243.3-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 - 英文版 |
|
|
|
GB/T 8243.2-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 2: Element by-pass valve characteristics 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性 - 英文版 |
|
|
|
GB/T 8243.1-2003 Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 1: Differential pressure/flow characteristics 内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性 - 英文版 |
|
|
|
GB/T 8190.8-2003 Reciprocating Internal combustion engines--Exhaust emission measurement--Part 8: Engine group determination 往复式内燃机 排放测量 第8部分: 发动机系组的确定 - 英文版 |
|
|
|
GB/T 8190.7-2003 Reciprocating Internal combustion engines--Exhaust emission measurement--Part 7: Engine family determination 往复式内燃机 排放测量 第7部分: 发动机系族的确定 - 英文版 |
|
|
|
GB/T 8190.3-2003 Reciprocating Internal combustion engines--Exhaust emission measurement--Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions 往复式内燃机 排放测量 第3部分: 稳态工况排气烟度的定义和测量方法 - 英文版 |
|
|
|
GB/T 2820.9-2002 Reciprocating Internal combustion engine driven alternating current generating sets--Part9:Measurement and evaluation of mechanical vibrations 往复式内燃机驱动的交流发电机组 第9部分:机械振动的测量和评价 - 英文版 |
|
|
|
GB/T 2820.8-2002 Reciprocating Internal combustion engine driven alternating current generating sets--Part 8:Requirements and tests for low-power generating sets 往复式内燃机驱动的交流发电机组 第8部分:对小功率发电机组的要求和试验 - 英文版 |
|
|
|
GB/T 2820.12-2002 Reciprocating Internal combustion engine driven alternating current generating sets--Part 12:Emergency power supply to safety services 往复式内燃机驱动的交流发电机组 第12部分:对安全装置的应急供电 - 英文版 |
|
|
|
GB/T 2820.10-2002 Reciprocating Internal combustion engine driven alternating current generating sets--Part 10:Measurement of airborne noise by the enveloping surface method 往复式内燃机驱动的交流发电机组 第10部分:噪声的测量(包面法) - 英文版 |
|
|
|
GB/T 2820.7-2002 Reciprocating Internal combustion engine driven alternating current generating sets--Part 7:Technical declarations for specification and design 往复式内燃机驱动的交流发电机组 第7部分:用于技术条件和设计的技术说明 - 英文版 |
|
| Find out:209Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 |
+86-755-2583-1330
