China Requirements on the GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 28387.5-2012 Safety requirements of the design and construction of printing and paper converting machines - Part 5：Machines for the production of corrugated board and machines for the conversion of flat and corrugated board 印刷机械和纸加工机械的设计及结构安全规则 第5部分：瓦楞纸板生产机械以及纸板和瓦楞纸板加工设备 - 英文版 |
 |
|
|
GB/T 28387.4-2012 Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines 印刷机械和纸加工机械的设计及结构安全规则 第4部分：书籍装订、纸加工和整饰机械 - 英文版 |
|
|
|
GB/T 28387.2-2012 Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing、varnishing machines and pre-press machinery 印刷机械和纸加工机械的设计及结构安全规则 第2部分：印刷机、上光机和印前机械 - 英文版 |
|
|
|
GB/T 28387.1-2012 Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements 印刷机械和纸加工机械的设计及结构安全规则 第1部分：一般要求 - 英文版 |
|
|
|
GB/T 28164-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable application 含碱性或其它非酸性电解质的蓄电池和蓄电池组 便携式密封蓄电池和蓄电池组的安全性要求 - 英文版 |
|
|
|
GB/T 27929-2011 Banking - Requirements for message authentication using symmetric techniques 银行业务 采用对称加密技术进行报文鉴别的要求 - 英文版 |
|
|
|
GB/T 16178-2011 Safety examinations and technical requirements for powered vehicles on the place used for a particular purpose 场（厂）内机动车辆安全检验技术要求 - 英文版 |
|
|
|
GB/T 26852-2011 Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems CAx系统中机电和电气应用之间的互操作要求 - 英文版 |
|
|
|
GB/T 26856-2011 Specification for the basic requirements and conformity test of Chinese office software 中文办公软件基本要求及符合性测试规范 - 英文版 |
|
|
|
GB/T 26678-2011 Electrical control system of machine tool - The requirements of processing program for CNC surface grinding machines 机床电气控制系统 数控平面磨床的加工程序要求 - 英文版 |
|
|
|
GB 18209.3-2010 Electrical safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators 机械电气安全 指示、标志和操作 第3部分：操动器的位置和操作的要求 - 英文版 |
|
|
|
GB 18180-2010 The requirements for the safety operation of gas carrier 液化气体船舶安全作业要求 - 英文版 |
|
|
|
GB/T 26259-2010 Technical requirements of reuse for the waste telecommunication equipment 废弃通信产品再使用技术要求 - 英文版 |
|
|
|
GB/T 26257-2010 The requirements of hearing aids compatibility and measurement methods for telephone handset 手柄电话助听器耦合技术要求和测量方法 - 英文版 |
|
|
|
GB 16362-2010 The requirements for quality assurance and radiological protection for patients in teletherapy 远距治疗患者放射防护与质量保证要求 - 英文版 |
|
|
|
GB/T 25959-2010 The power saving unit for lighting and technical requirements of application 照明节电装置及应用技术条件 - 英文版 |
|
|
|
GB/T 23718.3-2010 Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training bodies and the training process 机器状态监测与诊断 人员资格与人员评估的要求 第3部分：对培训机构和培训过程的要求 - 英文版 |
|
|
|
GB 22380.3-2010 Explosion protected safety technique of the petrol filling station - Part 3: Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 - 英文版 |
|
|
|
GB 22380.2-2010 Explosion protected safety technique of the petrol filling station - Part 2: Safety requirements for construction and performance of safe breaks for use on dispensers 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求 - 英文版 |
|
|
|
GB/T 25294-2010 General technical requirements for cabinets of synthesized control equipments in electrical power system 电力综合控制机柜通用技术要求 - 英文版 |
|
|
|
GB 25131-2010 Safety requirements for water chillers (heat pump) using the vapor compression cycle 蒸气压缩循环冷水（热泵）机组 安全要求 - 英文版 |
|
|
|
GB/T 25000.51-2010 Software engineering - Software product quality requirements and evaluation (SQuaRE) - Requirements for quality of commercial off-the-self (COTS) software product and instructions for testing 软件工程 软件产品质量要求和评价（SQuaRE） 商业现货（COTS）软件产品的质量要求和测试细则 - 英文版 |
|
|
|
GB/T 24612.2-2009 Requirements for electrical safety in the workplace - Part 2: Safety measure of operation on power off 电气设备应用场所的安全要求 第2部分：在断电状态下操作的安全措施 - 英文版 |
|
|
|
GB/T 12467.5-2009 Quality requirements for fusion welding of metallic materials - Part 5: Standard documents need to conform to claim conformity to the quality requirements 金属材料熔焊质量要求 第5部分：满足质量要求应依据的标准文件 - 英文版 |
|
|
|
GB/T 12467.1-2009 Quality reqirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements 金属材料熔焊质量要求 第1部分：质量要求相应等级的选择准则 - 英文版 |
|
|
|
GB 19510.2-2009 Lamp controlgear - Part 2: Particular requirements for starting devices (other than glow starters) 灯的控制装置 第2部分：启动装置 (辉光启动器除外)的特殊要求 - 英文版 |
|
|
|
GB 20936.2-2009 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air 可燃性气体探测用电气设备 第2部分：显示空气中甲烷体积含量至5%的I类探测器的性能要求 - 英文版 |
|
|
|
GB/T 11460-2009 Information technology - Requirements and test method of the chinese ideograms font 信息技术 汉字字型要求和检测方法 - 英文版 |
|
|
|
GB/T 22005-2009 Traceability in the feed and food chain - General principles and basic requirements for system design and implementation 饲料和食品链的可追溯性 体系设计与实施的通用原则和基本要求 - 英文版 |
|
|
|
GB/T 5132.1-2009 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements 电气用热固性树脂工业硬质圆形层压管和棒 第1部分：一般要求 - 英文版 |
|
|
|
GB/T 1303.9-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 9: Requirements for rigid laminated sheets based on polyimide resins 电气用热固性树脂工业硬质层压板 第9部分：聚酰亚胺树脂硬质层压板 - 英文版 |
|
|
|
GB/T 1303.8-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 8: Requirements for rigid laminated sheets based on silicone resins 电气用热固性树脂工业硬质层压板 第8部分：有机硅树脂硬质层压板 - 英文版 |
|
|
|
GB/T 1303.7-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins 电气用热固性树脂工业硬质层压板 第7部分：聚酯树脂硬质层压板 - 英文版 |
|
|
|
GB/T 1303.6-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 6: Requirements for rigid laminated sheets based on phenolic resins 电气用热固性树脂工业硬质层压板 第6部分：酚醛树脂硬质层压板 - 英文版 |
|
|
|
GB/T 1303.4-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Requirements for rigid laminated sheets based on epoxy resins 电气用热固性树脂工业硬质层压板 第4部分：环氧树脂硬质层压板 - 英文版 |
|
|
|
GB/T 1303.1-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements 电气用热固性树脂工业硬质层压板 第1部分：定义、分类和一般要求 - 英文版 |
|
|
|
GB/T 1303.11-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 11: Requirements for rigid laminated sheets based on polyamide-imide resins 电气用热固性树脂工业硬质层压板 第11部分：聚酰胺酰亚胺树脂硬质层压板 - 英文版 |
|
|
|
GB/T 1303.10-2009 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins 电气用热固性树脂工业硬质层压板 第10部分：双马来酰亚胺树脂硬质层压板 - 英文版 |
|
|
|
GB/T 23718.1-2009 Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 1: Requirements for certifying bodies and the certification process 机器状态监测与诊断 人员培训与认证的要求 第1部分：对认证机构和认证过程的要求 - 英文版 |
|
|
|
GB/T 14093.4-2009 Environmental technology requirements of machinery products for the industry - Corrosion environments 机械产品环境技术要求 工业腐蚀环境 - 英文版 |
|
|
|
GB/T 14093.1-2009 Environmental technical requirements of machinery products for the warm-damp environments 机械产品环境技术要求 湿热环境 - 英文版 |
|
|
|
GB/T 23629-2009 General requirements for the introduction of plant pathogens 引进植物病原生物安全控制技术要求 - 英文版 |
|
|
|
GB/T 20936.3-2009 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air 可燃性气体探测用电气设备 第3部分：显示空气中甲烷体积含量至100%的I类探测器的性能要求 - 英文版 |
|
|
|
GB/T 13539.4-2009 Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices 低压熔断器 第4部分：半导体设备保护用熔断体的补充要求 - 英文版 |
|
|
|
GB/T 16558.5-2009 The ship maintenance system - Part 5: Schedule for work cards in the first maintenance period and cards operation requirements 船舶维修保养体系 第5部分：工作卡的首排及其运行要求 - 英文版 |
|
|
|
GB 23290-2009 Machine-tools safety - Safety requirements for the design and construction of work holding chucks 机床安全 卡盘的设计和结构安全要求 - 英文版 |
|
|
|
GB 9706.39-2008 Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment 医用电气设备 第2-39部分：腹膜透析设备的安全专用要求 - 英文版 |
|
|
|
GB/T 12706.4-2008 Power cables with extruded insulation and their accessories for rated voltages from lkV (Um=1.2kV) up to 35kV(Um=40.5kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV) 额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第4部分：额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)电力电缆附件试验要求 - 英文版 |
|
|
|
GB 20936.4-2008 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas 可燃性气体探测用电气设备 第4部分：显示气体体积含量至100%的II类探测器的性能要求 - 英文版 |
|
|
|
GB 14536.5-2008 Automatic electrical controls for household and similar use - Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type 家用和类似用途电自动控制器 密封和半密封电动机-压缩机用电动机热保护器的特殊要求 - 英文版 |
|
| Find out:361Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 |
+86-755-2583-1330
