China The test method of t GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 30103.3-2013 Methods of testing for thermal performance on cold store―Part 3: Heat flux testing for envelope enclosure 冷库热工性能试验方法 第3部分：围护结构热流量检测 - 英文版 |
 |
|
|
GB/T 30103.2-2013 Methods of testing for thermal performance on cold store―Part 2: Air velocity testing 冷库热工性能试验方法 第2部分：风速检测 - 英文版 |
|
|
|
GB/T 30103.1-2013 Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing 冷库热工性能试验方法 第1部分：温度和湿度检测 - 英文版 |
|
|
|
GB/T 4757-2013 Methods for the batch flotation testing of fine coal 煤粉（泥）实验室单元浮选试验方法 - 英文版 |
|
|
|
GB/T 30020-2013 Test method for the defects of glass - Photoelastic scanning method 玻璃缺陷检测方法 光弹扫描法 - 英文版 |
|
|
|
GB/T 15748-2013 The method of galvanic corrosion test for metallic ship materials 船用金属材料电偶腐蚀试验方法 - 英文版 |
|
|
|
GB/T 17657-2013 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels 人造板及饰面人造板理化性能试验方法 - 英文版 |
|
|
|
GB/T 19277.2-2013 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量 - 英文版 |
|
|
|
GB 17578-2013 Requirements and test methods of strength for the superstructure of bus 客车上部结构强度要求及试验方法 - 英文版 |
|
|
|
GB/T 16903.3-2013 Rules for the presentation of graphical symbols for use on graphical signs - Part 3: Method for testing perceptibility 标志用图形符号表示规则 第3部分：感知性测试方法 - 英文版 |
|
|
|
GB/T 16903.2-2013 Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility 标志用图形符号表示规则 第2部分：理解度测试方法 - 英文版 |
|
|
|
GB/T 29536-2013 Testing method for the forming limit diagram (FLD) of metal tube 金属管材成形极限图（FLD） 试验方法 - 英文版 |
|
|
|
GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials 物质恒温稳定性的热分析试验方法 - 英文版 |
|
|
|
GB/T 29043-2012 Graduation and test method for thermal insulating properties of curtain walls 建筑幕墙保温性能分级及检测方法 - 英文版 |
|
|
|
GB/T 7196-2012 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids 用液体萃取测定电气绝缘材料离子杂质的试验方法 - 英文版 |
|
|
|
GB/T 29365-2012 Wood-Plastic Composite (WPC) - Test methods of artificial weathering 塑木复合材料 人工气候老化试验方法 - 英文版 |
|
|
|
GB/T 29313-2012 Test method for thermal transmission properties of electrical insulation materials 电气绝缘材料热传导性能试验方法 - 英文版 |
|
|
|
GB/T 29307-2012 The reliability test methods of drive motor system for electric vehicles 电动汽车用驱动电机系统可靠性试验方法 - 英文版 |
|
|
|
GB/T 29247-2012 General methods for testing the performance of industrial process measurement and control instruments 工业自动化仪表通用试验方法 - 英文版 |
|
|
|
GB/T 28896-2012 Metallic Materials - Method of test for the determination of quasistatic fracture toughness of welds 金属材料 焊接接头准静态断裂韧度测定的试验方法 - 英文版 |
|
|
|
GB/T 28860-2012 Test method for the determination of get time of encapsulating material of powdered epoxy 环氧粉末包封料胶化时间测定方法 - 英文版 |
|
|
|
GB/T 28638-2012 Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes 城镇供热管道保温结构散热损失测试与保温效果评定方法 - 英文版 |
|
|
|
GB/T 9292-2012 Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperature condition 表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法 - 英文版 |
|
|
|
GB/T 28289-2012 Test methods for composite performances of aluminium alloy thermal barrier profiles 铝合金隔热型材复合性能试验方法 - 英文版 |
|
|
|
GB/T 25749.7-2012 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter 机械安全 空气传播的有害物质排放的评估 第7部分：测量污染物浓度参数的试验台法 - 英文版 |
|
|
|
GB/T 25749.6-2012 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet 机械安全 空气传播的有害物质排放的评估 第6部分：测量带导管出口的空气净化系统质量分离效率的试验台法 - 英文版 |
|
|
|
GB/T 25749.5-2012 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet 机械安全 空气传播的有害物质排放的评估 第5部分：测量不带导管出口的空气净化系统质量分离效率的试验台法 - 英文版 |
|
|
|
GB/T 27945.2-2011 The management of hazardous solid wastes from heat treatment salts Part 2：Test method of extractives 热处理盐浴有害固体废物的管理 第2部分：浸出液检测方法 - 英文版 |
|
|
|
GB/T 20485.31-2011 Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity 振动与冲击传感器的校准方法 第31部分：横向振动灵敏度测试 - 英文版 |
|
|
|
GB/T 18570.6-2011 Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法 - 英文版 |
|
|
|
GB/T 27797.11-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 - 英文版 |
|
|
|
GB/T 27797.10-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 - 英文版 |
|
|
|
GB/T 27698.8-2011 Test method for the performance of heat exchangers and heat exchange element - Part 8: Determination of industrial locale for heat exchangers 热交换器及传热元件性能测试方法 第8部分：热交换器工业标定 - 英文版 |
|
|
|
GB/T 27698.7-2011 Test method for the performance of heat exchangers and heat exchange element - Part 7: Measurement of noise from air-cooled heat exchangers 热交换器及传热元件性能测试方法 第7部分：空冷器噪声测定 - 英文版 |
|
|
|
GB/T 27698.6-2011 Test method for the performance of heat exchangers and heat exchange element - Part 6: Fing tube for air-cooled heat exchangers 热交换器及传热元件性能测试方法 第6部分：空冷器用翅片管 - 英文版 |
|
|
|
GB/T 27698.5-2011 Test method for the performance of heat exchangers and heat exchange element - Part 5: Heat transfer tube for tubular heat exchangers 热交换器及传热元件性能测试方法 第5部分：管壳式热交换器用换热管 - 英文版 |
|
|
|
GB/T 27698.4-2011 Test method for the performance of heat exchangers and heat exchange element - Part 4: Spiral heat exchanger 热交换器及传热元件性能测试方法 第4部分：螺旋板式热交换器 - 英文版 |
|
|
|
GB/T 27698.3-2011 Test method for the performance of heat exchangers and heat exchange element - Part 3: Plate heat exchanger 热交换器及传热元件性能测试方法 第3部分：板式热交换器 - 英文版 |
|
|
|
GB/T 27698.2-2011 Test method for the performance of heat exchangers and heat exchange element - Part 2: Tubular heat exchanger 热交换器及传热元件性能测试方法 第2部分：管壳式热交换器 - 英文版 |
|
|
|
GB/T 27698.1-2011 Test method for the performance of heat exchangers and heat exchange element - Part 1: General requirements 热交换器及传热元件性能测试方法 第1部分：通用要求 - 英文版 |
|
|
|
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers 热重分析仪质量示值校准的试验方法 - 英文版 |
|
|
|
GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers 热重分析仪失重和剩余量的试验方法 - 英文版 |
|
|
|
GB/T 27760-2011 Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using si (111) monatomic steps 利用Si（111）晶面原子台阶对原子力显微镜亚纳米高度测量进行校准的方法 - 英文版 |
|
|
|
GB/T 27749-2011 Test procedure for thermal endurance of insulating varnishes - Electric strength method 绝缘漆耐热性试验规程 电气强度法 - 英文版 |
|
|
|
GB/T 27903-2011 Fire resistance test for lift landing doors - Methods of measuring integrity,thernal insulation and heat flux 电梯层门耐火试验 完整性、隔热性和热通量测定法 - 英文版 |
|
|
|
GB/T 27587-2011 Test method for the resistance to microwave heating of domestic ceramicware 日用陶瓷耐微波加热测试方法 - 英文版 |
|
|
|
GB/T 26977-2011 Test methods for the thermal performance of solar air collectors 太阳能空气集热器热性能试验方法 - 英文版 |
|
|
|
GB/T 26919-2011 Coal preparation plant - Methods for the natural falling testing of slurry 选煤厂 煤泥水自然沉降试验方法 - 英文版 |
|
|
|
GB/T 10820-2011 Thermal efficiency and test methods of boilers for daily life 生活锅炉热效率及热工试验方法 - 英文版 |
|
|
|
GB/T 1346-2011 Test methods for water requirement of normal consistency, setting time and soundness of the portland cement 水泥标准稠度用水量、凝结时间、安定性检验方法 - 英文版 |
|
| Find out:573Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 |
+86-755-2583-1330
