China Corrosion of metals GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 42791-2024 Corrosion of metals and Alloys - Electrochemical Guidelines for noise measurement corrosion test 航空用铝合金锻件通用技术规范 - 英文版 |
 |
|
|
GB/T 43118-2023 Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of deposits of salt, ash or other substances 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法 - 英文版 |
|
|
|
GB/T 42913-2023 Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 - 英文版 |
|
|
|
GB/T 42912-2023 Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 - 英文版 |
|
|
|
GB/T 42904-2023 Corrosion of metals and alloys Seawater pipeline dynamic corrosion test 金属和合金的腐蚀 海水管路动水腐蚀试验 - 英文版 |
|
|
|
GB/T 42672-2023 Corrosion of metals and alloys - Methods for monitoring environmental factors in surface seawater exposure tests 金属和合金的腐蚀 表层海水暴露试验环境因素监测方法 - 英文版 |
|
|
|
GB/T 42661-2023 Corrosion of metals and alloys Test method for stress corrosion susceptibility of steel bars in simulated marine environment 金属和合金的腐蚀 模拟海洋环境中钢筋应力腐蚀敏感性试验方法 - 英文版 |
|
|
|
GB/T 17899-2023 Corrosion of metals and alloys Potentiometric method for measuring the pitting corrosion potential of stainless steel in sodium chloride solution 金属和合金的腐蚀 不锈钢在氯化钠溶液中点蚀电位的动电位测量方法 - 英文版 |
|
|
|
GB/T 5776-2023 Corrosion of metals and alloys Guidelines for exposure and evaluation of metals and alloys in surface seawater 金属和合金的腐蚀 金属和合金在表层海水中暴露和评定的导则 - 英文版 |
|
|
|
GB/T 41653-2022 Corrosion of metals and alloys - Anodic test method for susceptibility to intergranular corrosion of heat-treated aluminum alloys 金属和合金的腐蚀 热处理铝合金晶间腐蚀敏感性阳极试验方法 - 英文版 |
|
|
|
GB/T 41654-2022 Corrosion of metals and alloys - Method for metallographic examination of specimens after exposure to high temperature corrosive environments 金属和合金的腐蚀 在高温腐蚀环境下暴露后试样的金相检验方法 - 英文版 |
|
|
|
GB/T 10123-2022 Corrosion terminology of metals and alloys 金属和合金的腐蚀 术语 - 英文版 |
|
|
|
GB/T 15970.11-2022 Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for hydrogen embrittlement and hydrogen-induced cracking tests of metals and alloys 金属和合金的腐蚀 应力腐蚀试验 第11部分:金属和合金氢脆和氢致开裂试验指南 - 英文版 |
|
|
|
GB/T 41951-2022 Corrosion of metals and alloys - Test method for corrosion resistance of steel connecting parts and steel components for construction 金属和合金的腐蚀 建筑用钢连接部件及钢构件耐腐蚀性能测试方法 - 英文版 |
|
|
|
GB/T 41756-2022 Corrosion of metals and alloys - Method for assessing resistance to atmospheric corrosion of low alloy steels 金属和合金的腐蚀 低合金钢耐大气腐蚀评估方法 - 英文版 |
|
|
|
GB/T 40403-2021 Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 - 英文版 |
|
|
|
GB/T 40393-2021 Corrosion of metals and alloys—Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels 金属和合金的腐蚀 奥氏体不锈钢晶间腐蚀敏感性加速腐蚀试验方法 - 英文版 |
|
|
|
GB/T 40339-2021 Corrosion of metals and alloys—Guidelines for assessing the significances of stress corrosion cracks detected in service 金属和合金的腐蚀 服役中检出的应力腐蚀裂纹的重要性评估导则 - 英文版 |
|
|
|
GB/T 40338-2021 Corrosion of metals and alloys—Exfoliation corrosion testing of aluminium alloys 金属和合金的腐蚀 铝合金剥落腐蚀试验 - 英文版 |
|
|
|
GB/T 40314-2021 Corrosion of metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel 金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型 - 英文版 |
|
|
|
GB/T 40299-2021 Corrosion of metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing 金属和合金的腐蚀 腐蚀试验电化学测量方法适用惯例 - 英文版 |
|
|
|
GB/T 15970.10-2021 Corrosion of metals and alloys—Stress corrosion testing—Part l0: Reverse U-bend method 金属和合金的腐蚀 应力腐蚀试验 第10部分：反向U型弯曲试验方法 - 英文版 |
|
|
|
GB/T 40377-2021 Corrosion of metals and alloys—Determination of AC corrosion—Protection criteria 金属和合金的腐蚀 交流腐蚀的测定 防护准则 - 英文版 |
|
|
|
GB/T 40796-2021 Corrosion of metals and alloys—Guidelines for applying statistics to analysis of corrosion data 金属和合金的腐蚀 腐蚀数据分析应用统计学指南 - 英文版 |
|
|
|
GB/T 39534-2020 Corrosion of metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids 金属和合金的腐蚀 液体中不锈钢和镍基合金均匀腐蚀速率测定方法 - 英文版 |
|
|
|
GB/T 39154-2020 Corrosion of metals and alloys—Cathodic protection of steel in concrete 金属和合金的腐蚀 混凝土用钢筋的阴极保护 - 英文版 |
|
|
|
GB/T 39155-2020 Corrosion of metals and alloys—Cathodic protection of harbour installations 金属和合金的腐蚀 海港设施的阴极保护 - 英文版 |
|
|
|
GB/T 4334-2020 Corrosion of metals and alloys－Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels 金属和合金的腐蚀 奥氏体及铁素体-奥氏体（双相）不锈钢晶间腐蚀试验方法 - 英文版 |
|
|
|
GB/T 39637-2020 Corrosion of metals and alloys—Classification of soil corrosivity 金属和合金的腐蚀 土壤环境腐蚀性分类 - 英文版 |
|
|
|
GB/T 39560.701-2020 Determination of certain substances in electrical and electronic products—Part 7-1:Hexavalent chromium—Presence of hexavalent chromium [Cr(VI)] in colourless and coloured corrosion-protected coatings on metals by the colorimetric method 电子电气产品中某些物质的测定 第7-1部分：六价铬 比色法测定金属上无色和有色防腐镀层中的六价铬[Cr(VI)] - 英文版 |
|
|
|
GB/T 38269-2019 Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 - 英文版 |
|
|
|
GB/T 38430-2019 Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 - 英文版 |
|
|
|
GB/T 38269-2019 Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity 金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润 - 英文版 |
|
|
|
GB/T 37623-2019 Corrosion of metals and alloys—Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors 金属和合金的腐蚀 核反应堆用锆合金水溶液腐蚀试验 - 英文版 |
|
|
|
GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes 金属和合金的腐蚀 高频电阻焊焊管沟槽腐蚀性能恒电位试验与评价方法 - 英文版 |
|
|
|
GB/T 19292.2-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 2: Guiding values for the corrosivity categories 金属和合金的腐蚀 大气腐蚀性 第2部分：腐蚀等级的指导值 - 英文版 |
|
|
|
GB/T 19292.1-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 1: Classification, determination and estimation 金属和合金的腐蚀 大气腐蚀性 第1部分：分类、测定和评估 - 英文版 |
|
|
|
GB/T 19746-2018 Corrosion of metals and alloys—Alternate immersion test in salt solution 金属和合金的腐蚀 盐溶液周浸试验 - 英文版 |
|
|
|
GB/T 15970.1-2018 Corrosion of metals and alloys—Stress corrosion testing—Part 1: General guidance on testing procedures 金属和合金的腐蚀 应力腐蚀试验 第1部分：试验方法总则 - 英文版 |
|
|
|
GB/T 19292.4-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 4: Determination of corrosion rate of standard specimens for the evaluation of corrosivity 金属和合金的腐蚀 大气腐蚀性 第4部分：用于评估腐蚀性的标准试样的腐蚀速率的测定 - 英文版 |
|
|
|
GB/T 19292.3-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 3: Measurement of environmental parameters affecting corrosivity of atmospheres 金属和合金的腐蚀 大气腐蚀性 第3部分：影响大气腐蚀性环境参数的测量 - 英文版 |
|
|
|
GB/T 36174-2018 Corrosion of metals and alloys—Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys 金属和合金的腐蚀 固溶热处理铝合金的耐晶间腐蚀性的测定 - 英文版 |
|
|
|
GB/T 15970.7-2017 Corrosion of metals and alloys—Stress corrosion testing—Part 7: Slow strain rate testing 金属和合金的腐蚀 应力腐蚀试验 第7部分: 慢应变速率试验 - 英文版 |
|
|
|
GB/T 4157-2017 Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environment 金属在硫化氢环境中抗硫化物应力开裂和应力腐蚀开裂的实验室试验方法 - 英文版 |
|
|
|
GB/T 34203-2017 Corrosion of metals and alloys—Air pollutant monitoring and analysis methods 金属和合金的腐蚀 大气污染物的采集与分析方法 - 英文版 |
|
|
|
GB/T 15260-2016 Corrosion of metals and alloys—Test methods for intergranular corrosion of nickel alloys 金属和合金的腐蚀 镍合金晶间腐蚀试验方法 - 英文版 |
|
|
|
GB/T 32571-2016 Corrosion of metals and alloys—Corrosion test for intergranular corrosion susceptibility of high—Cr ferritic stainless steels 金属和合金的腐蚀 高铬铁素体不锈钢晶间腐蚀试验方法 - 英文版 |
|
|
|
GB/T 32550-2016 Corrosion of metals and alloys—Determination of the critical pitting temperature under potentiostatic control 金属和合金的腐蚀 恒电位控制下的临界点蚀温度测定 - 英文版 |
|
|
|
GB/T 17897-2016 Corrosion of metals and alloys—Corrosion test for pitting corrosion resistance of stainless steels in the ferric chloride solution 金属和合金的腐蚀 不锈钢三氯化铁点腐蚀试验方法 - 英文版 |
|
|
|
GB/T 31935-2015 Corrosion of metals and alloys—Corrosion test for intergranular corrosion susceptibility of low-Cr ferritic stainless steels 金属和合金的腐蚀 低铬铁素体不锈钢晶间腐蚀试验方法 - 英文版 |
|
| Find out:92Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
