China Determination for cr GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 15597.2-2024 Plastics - Polymethyl methacrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination 塑料-聚甲基丙烯酸甲酯（PMMA）-模塑和挤出材料-第2部分：试样制备和性能测定 - 英文版 |
 |
|
|
GB/T 43748-2024 Microbeam analysis-Transmission electron microscopy-Method for determination of thickness of functional thin film layers in integrated circuit chips 微束分析-透射电子显微术-集成电路芯片中功能薄膜层厚度的测定方法 - 英文版 |
|
|
|
GB/T 43610-2023 Microbeam analysis Analytical electron microscopy Transmission electron microscopy method for determination of apparent growth direction of linear crystals 微束分析 分析电子显微术 线状晶体表观生长方向的透射电子显微术测定方法 - 英文版 |
|
|
|
GB/T 25851.2-2023 Mobile cranes - Test determination of crane performance - Part 2: Structural capacity under static loads 流动式起重机 起重机性能的试验测定 第2部分：静载荷作用下的结构能力 - 英文版 |
|
|
|
GB/T 20405.1-2023 Urine absorbent for incontinence Polyacrylate super absorbent powder Part 1: Determination of pH value 失禁者用尿液吸收剂 聚丙烯酸酯高吸水性粉末 第1部分：pH值的测定方法 - 英文版 |
|
|
|
GB/T 17530.2-2023 Test methods for industrial acrylic acid and esters Part 2: Determination of organic impurities and purity of industrial acrylic acid esters Gas chromatography 工业丙烯酸及酯的试验方法 第2部分：工业用丙烯酸酯有机杂质及纯度的测定 气相色谱法 - 英文版 |
|
|
|
GB/T 43316.5-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 - 英文版 |
|
|
|
GB/T 43117-2023 Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions 玻璃纤维增强热固性塑料（GRP）管 湿态或干态条件下环蠕变性能的测定 - 英文版 |
|
|
|
GB/T 43088-2023 Microbeam analysis Analytical electron microscopy Method for determination of dislocation density in metallic thin crystal specimens 微束分析 分析电子显微术 金属薄晶体试样中位错密度的测定方法 - 英文版 |
|
|
|
GB/T 35306-2023 Determination of carbon and oxygen content in silicon single crystal Low-temperature Fourier transform infrared spectroscopy 硅单晶中碳、氧含量的测定 低温傅立叶变换红外光谱法 - 英文版 |
|
|
|
GB/T 42903-2023 Metallic materials—Method for determination of creep crack and creep-fatigue crack growth rates 金属材料 蠕变裂纹及蠕变-疲劳裂纹扩展速率测定方法 - 英文版 |
|
|
|
GB/T 7717.16-2022 Acrylonitrile for industrial use - Part 16: Determination of iron and copper content - Graphite furnace atomic absorption spectrometry and inductively coupled plasma mass spectrometry 工业用丙烯腈 第16部分：铁、铜含量的测定 石墨炉原子吸收光谱法和电感耦合等离子体质谱法 - 英文版 |
|
|
|
GB/T 7717.12-2022 Acrylonitrile for industrial use - Part 12: Determination of purity and impurity content - Gas chromatography 工业用丙烯腈 第12部分：纯度及杂质含量的测定 气相色谱法 - 英文版 |
|
|
|
GB/T 1927.15-2022 Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains 无疵小试样木材物理力学性质试验方法 第15部分：横纹抗拉强度测定 - 英文版 |
|
|
|
GB/T 10322.6-2022 Determination of hot cracking index of iron ore for blast furnace charge 高炉炉料用铁矿石 热裂指数的测定 - 英文版 |
|
|
|
GB/T 17473.7-2022 Test methods of precious metals pastes used for microelectronics—Part 7: Determination of solderability and solder leaching resistance 微电子技术用贵金属浆料测试方法 第7部分：可焊性、耐焊性测定 - 英文版 |
|
|
|
GB/T 42175-2022 Determination of copper, lead, zinc, cadmium and chromium in drilling mud and drilling cuttings for offshore oil exploration and development Microwave digestion-inductively coupled plasma mass spectrometry 海洋石油勘探开发钻井泥浆和钻屑中铜、铅、锌、镉、铬的测定 微波消解-电感耦合等离子体质谱法 - 英文版 |
|
|
|
GB/T 42047-2022 Determination method for outgassing products of materials and components in the sealed cabin of manned spacecraft 载人航天器密封舱内材料和部组件出气产物测定方法 - 英文版 |
|
|
|
GB/T 40345-2021 Crop protection equipment—Test method for the determination of drainable volume and its concentration 植物保护机械 确定可排放液体体积及浓度的试验方法 - 英文版 |
|
|
|
GB/T 40186-2021 Determination of genetic material damage strength for microbial mutation breeding—Umu method 微生物诱变育种致遗传物质损伤强度测定 Umu法 - 英文版 |
|
|
|
GB/T 9966.17-2021 Test methods for natural stone-Part 17:Determination of resistance to salt crystallization 天然石材试验方法 第17部分：盐结晶强度的测定 - 英文版 |
|
|
|
GB/T 38490-2021 Determination of high-throughput adaptive evolution for microorganisms—Microfluidic chip method 微生物高通量适应性进化测定 微流控芯片法 - 英文版 |
|
|
|
GB/T 38485-2021 Determination for trace gene residues of microorganisms—Microdroplet digital PCR 微生物痕量基因残留测定 微滴数字PCR法 - 英文版 |
|
|
|
GB/T 41171-2021 Urine-absorbing aids for incontinence -- Measurement of airborne respirable polyacrylate superabsorbent materials -- Determination of dust in collection cassettes by sodium atomic absorption spectrometry 失禁用尿吸收辅助器具? 空气中可吸入聚丙烯酸高吸水性材料测量 钠原子吸收光谱法对采集盒粉尘的测定 - 英文版 |
|
|
|
GB/T 40919-2021 Polyethylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth 管道系统用聚乙烯材料 与慢速裂纹增长相关的应变硬化模量的测定 - 英文版 |
|
|
|
GB/T 39137-2020 Determination for the orientation of refractory metal single crystal 难熔金属单晶晶向测定方法 - 英文版 |
|
|
|
GB/T 39101-2020 Determination of antimicrobial activity for polypeptides—Inhibition zone method 多肽抗菌性测定 抑菌圈法 - 英文版 |
|
|
|
GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope 贵金属复合材料覆层厚度的扫描电镜测定方法 - 英文版 |
|
|
|
GB/T 17360-2020 Microbeam analysis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer 微束分析 钢中低含量硅、锰的电子探针定量分析方法 - 英文版 |
|
|
|
GB/T 24522-2020 Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 - 英文版 |
|
|
|
GB/T 38568-2020 Determination of growth phenotype for industrialmicrobial strain—Microdroplet turbidity 工业微生物菌株生长表型测定 微液滴浊度法 - 英文版 |
|
|
|
GB/T 39422-2020 Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 - 英文版 |
|
|
|
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 - 英文版 |
|
|
|
GB/T 38483-2020 Determination of antibacterial activity for microbial secondary metabolites—Inhibition zone method 微生物源抗生素类次生代谢产物抗细菌活性测定 抑菌圈法 - 英文版 |
|
|
|
GB/T 38481-2020 Determination of ultralow-frequency mutations for microorganisms—Duplex sequencing 微生物超低频突变测定 双重测序法 - 英文版 |
|
|
|
GB/T 38480-2020 Determination of antifungal activity for microbial secondary metabolites—Mycelial growth rate method 微生物源抗生素类次生代谢产物抗真菌活性测定 菌丝生长速率法 - 英文版 |
|
|
|
GB/T 18476-2019 Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验） - 英文版 |
|
|
|
GB/T 37640-2019 ：Determination of chloroacetaldehyde,2,4-dihydroxy-3-methylbenzaldehyde,crotonaldehyde,acetophenone,2-pentylidenecyclohexanone and glutaral in cosmetics—High performance liquid chromatography 化妆品中氯乙醛、2,4-二羟基-3-甲基苯甲醛、巴豆醛、苯乙酮、2-亚戊基环己酮、戊二醛含量的测定 高效液相色谱法 - 英文版 |
|
|
|
GB/T 19314.5-2019 Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第5部分：单体船设计压力、设计应力、构件尺寸的确定 - 英文版 |
|
|
|
GB/T 19314.4-2019 Small craft—Hull construction and scantlings—Part 5:Design pressures for monohulls,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第4部分：车间和制造 - 英文版 |
|
|
|
GB/T 37160-2019 Standard test method for determination of trace metals in heavy distillate,residual oil and crude oil—Inductively coupled plasma optical emission spectrometry（ICP-OES） 重质馏分油、渣油及原油中痕量金属元素的测定 电感耦合等离子体发射光谱法 - 英文版 |
|
|
|
GB/T 10066.6-2018 Test methods for electroheating and electromagnetic processing installations—Part 6：Test methods for the determination of power output of industrial microwave heating installations 电热和电磁处理装置的试验方法-第6部分：工业微波加热装置输出功率的测定方法 - 英文版 |
|
|
|
GB/T 33260.3-2018 Capability of detection—Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used 检出能力 第3部分：无校准数据情形响应变量临界值的确定方法 - 英文版 |
|
|
|
GB/T 7717.15-2018 Acrylonitrile for industrial use—Part 15：Determination of concent of p-hydroxylanisole 工业用丙烯腈 第15部分：对羟基苯甲醚含量的测定 - 英文版 |
|
|
|
GB/T 22319.11-2018 Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction 石英晶体元件参数的测量 第11部分：采用自动网络分析技术和误差校正确定负载谐振频率和有效负载电容的标准方法 - 英文版 |
|
|
|
GB/T 14201-2018 Iron ore pellets for blast furnace and direct reduction feedstocks—Determination of the crushing strength 高炉和直接还原用铁球团矿 抗压强度的测定 - 英文版 |
|
|
|
GB/T 20441.6-2017 Electroacoustics—Measurement microphones—Part 6: Electrostatic actuators for determination of frequency response 电声学 测量传声器 第6部分：用于测定频率响应的静电激励器 - 英文版 |
|
|
|
GB/T 10574.11-2017 Methods for chemical analysis of tin-lead solders—Part 11：Determination of phosphorus content—Crystal violet phosphorus-vanadium-molybdeum heteropoly acid spectrophotometry 锡铅焊料化学分析方法 第11部分：磷量的测定 结晶紫-磷钒钼杂多酸分光光度法 - 英文版 |
|
|
|
GB/T 34550.3-2017 Method for evaluation of cooling seawater treatment agents—Part 3: Determination of inhibiting microbes performance 海水冷却水处理药剂性能评价方法 第3部分：菌藻抑制性能的测定 - 英文版 |
|
|
|
GB/T 34405-2017 Determination for migration of acrylamide in household papers—Liquid chromatography-tandem mass spectrometry（LC-MS/MS）method 家用纸制品中丙烯酰胺迁移量的测定 液相色谱-串联质谱法 - 英文版 |
|
| Find out:152Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |
+86-755-2583-1330
