China Determination of 6 k GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 3653.1-2024 Determination of boron iron-boron content-alkali titration method- 硼铁-硼含量的测定-碱量滴定法- - 英文版 |
 |
|
|
GB/T 11066.12-2024 Methods for chemical analysis of gold - Part 12: - Determination of silver, copper, iron, lead, bismuth, antimony, magnesium, nickel, manganese, palladium, chromium, platinum, rhodium, titanium, zinc, arsenic, tin, silicon, cobalt, calcium, potassium, lithium, sodium, tellurium, vanadium, zirconium, cadmium, molybdenum, rhenium, and aluminum content - Inductively coupled plasma atomic emission spectrometry 金化学分析方法-第12-部分：-银、铜、铁、铅、铋、锑、镁、镍、锰、钯、铬、铂、铑、钛、锌、砷、锡、硅、钴、钙、钾、锂、钠、碲、钒、锆、镉、钼、铼、铝含量的测定-电感耦合等离子体原子发射光谱法 - 英文版 |
|
|
|
GB/T 23561.11-2024 Methods for determination of physical and mechanical properties of coal and rock - Part 11: Determination of shear strength of coal and rock 煤和岩石物理力学性质测定方法-第11部分：煤和岩石抗剪强度测定方法 - 英文版 |
|
|
|
GB/T 23561.1-2024 Methods for determination of physical and mechanical properties of coal and rock - Part 1: General provisions for sampling 煤和岩石物理力学性质测定方法-第1部分：采样一般规定 - 英文版 |
|
|
|
GB/T 42513.6-2024 Chemical analysis methods for nickel alloys-Part 6: Determination of molybdenum content-Inductively coupled plasma atomic emission spectrometry 镍合金化学分析方法-第6部分：钼含量的测定-电感耦合等离子体原子发射光谱法 - 英文版 |
|
|
|
GB/T 23561.8-2024 Methods for determination of physical and mechanical properties of coal and rock - Part 8: Methods for determination of deformation parameters of coal and rock 煤和岩石物理力学性质测定方法-第8部分：煤和岩石变形参数测定方法 - 英文版 |
|
|
|
GB/T 43603.3-2024 Chemical analysis methods for nickel-platinum target alloys - Part 3: Determination of carbon content - high-frequency infrared detection method - 镍铂靶材合金化学分析方法-第3部分：碳含量的测定-高频红外检测法- - 英文版 |
|
|
|
GB/T 43603.2-2024 Chemical analysis methods for nickel-platinum target alloys - Part 2: Determination of magnesium, aluminum, titanium, vanadium, chromium, manganese, iron, cobalt, copper, zinc, zirconium, silver, palladium, tin, samarium, lead, silicon content - inductively coupled plasma mass spectrometry - 镍铂靶材合金化学分析方法-第2部分：镁、铝、钛、钒、铬、锰、铁、钴、铜、锌、锆、银、钯、锡、钐、铅、硅含量的测定-电感耦合等离子体质谱法- - 英文版 |
|
|
|
GB/T 43607-2023 Palladium ingot analysis method Determination of silver, aluminum, gold, bismuth, chromium, copper, iron, iridium, magnesium, manganese, nickel, lead, platinum, rhodium, ruthenium, silicon, tin, zinc content Spark discharge atomic emission spectrometry 钯锭分析方法 银、铝、金、铋、铬、铜、铁、铱、镁、锰、镍、铅、铂、铑、钌、硅、锡、锌含量测定 火花放电原子发射光谱法 - 英文版 |
|
|
|
GB/T 43603.1-2023 Methods for chemical analysis of nickel-platinum target alloys Part 1: Determination of platinum content Inductively coupled plasma atomic emission spectrometry 镍铂靶材合金化学分析方法 第1部分:铂含量的测定 电感耦合等离子体原子发射光谱法 - 英文版 |
|
|
|
GB/T 3260.11-2023 Methods for chemical analysis of tin Part 11: Determination of copper, iron, bismuth, lead, antimony, arsenic, aluminum, zinc, cadmium, silver, nickel and cobalt content - Inductively coupled plasma atomic emission spectrometry 锡化学分析方法 第11部分：铜、铁、铋、铅、锑、砷、铝、锌、镉、银、镍和钴含量的测定 电感耦合等离子体原子发射光谱法 - 英文版 |
|
|
|
GB/T 43316.6-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 - 英文版 |
|
|
|
GB/T 43316.5-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 - 英文版 |
|
|
|
GB/T 43316.4-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 - 英文版 |
|
|
|
GB/T 43316.3-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 - 英文版 |
|
|
|
GB/T 43316.2-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile load method 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 - 英文版 |
|
|
|
GB/T 43316.1-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 1: General principles 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 - 英文版 |
|
|
|
GB 31660.8-2019 National food safety standards Determination of azaamphenanthrene residues in cattle edible tissues and milk Liquid chromatography-tandem mass spectrometry 食品安全国家标准 牛可食性组织及牛奶中氮氨菲啶残留量的测定 液相色谱-串联质谱法 - 英文版 |
|
|
|
GB/T 43016-2023 Artificial Leather Test Methods for Synthetic Leather Determination and Evaluation of Surface Wrinkles 人造革合成革试验方法 表面褶皱的测定和评价 - 英文版 |
|
|
|
GB/T 1630.2-2023 Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 - 英文版 |
|
|
|
GB/T 42670-2023 Determination method of Rockwell hardness of carbon materials 炭素材料洛氏硬度测定方法 - 英文版 |
|
|
|
GB/T 42630-2023 Method for chemical phase analysis of copper-nickel sulfide ores—Determination of nickel and cobalt content in six mineral phases 铜镍硫化物矿石化学物相分析方法 6 种矿物相中镍和钴含量的测定 - 英文版 |
|
|
|
GB/T 41649-2022 Determination of formaldehyde emission from wooden toys - Flask method 木制玩具中甲醛释放量的测定 烧瓶法 - 英文版 |
|
|
|
GB/T 13761.1-2022 Geosynthetics - Determination of thickness under specified pressure - Part 1: single layer products 土工合成材料 规定压力下厚度的测定 第1部分：单层产品 - 英文版 |
|
|
|
GB/T 10322.6-2022 Determination of hot cracking index of iron ore for blast furnace charge 高炉炉料用铁矿石 热裂指数的测定 - 英文版 |
|
|
|
GB/T 6730.60-2022 Iron ores - Determination of nickel content - Flame atomic absorption spectrometric method 铁矿石 镍含量的测定 火焰原子吸收光谱法 - 英文版 |
|
|
|
GB/T 41366-2022 Livestock and poultry meat quality detection Determination of moisture, protein and fat content Near infrared method 畜禽肉品质检测 水分、蛋白质、脂肪含量的测定 近红外法 - 英文版 |
|
|
|
GB/T 41965-2022 Photography Flushing Waste Liquid Determination of Total Content of Ammonia Nitrogen (Micro-diffusion Kjeldahl Nitrogen Method) 摄影 冲洗废液 氨态氮总含量的测定 (微扩散凯氏氮法) - 英文版 |
|
|
|
GB/T 26416.3-2022 Chemical analysis methods of rare earth ferroalloys - Part 3: Determination of calcium, magnesium, aluminum, nickel, manganese content - Inductively coupled plasma emission spectrometry 稀土铁合金化学分析方法 第3部分：钙、镁、铝、镍、锰量的测 定 电感耦合等离子体发射光谱法 - 英文版 |
|
|
|
GB/T 41682-2022 Determination of headspace gas content in food plastic packaging containers - sensor method 食品塑料包装容器中顶空气体含量的测定 传感器法 - 英文版 |
|
|
|
GB/T 41762.2-2022 Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 - 英文版 |
|
|
|
GB/T 40368-2021 Determination of kunitz trypsin inhibitor of plant metabolites—Enzyme-linked immunosorbent assay 植物代谢产物胰蛋白酶抑制因子测定 酶联免疫吸附法 - 英文版 |
|
|
|
GB/T 6286-2021 Determination of bulk density for molecular sieve 分子筛堆积密度测定方法 - 英文版 |
|
|
|
GB/T 9966.11-2021 Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal shock 天然石材试验方法 第11部分：激冷激热加速老化强度测定 - 英文版 |
|
|
|
GB/T 39996-2021 Fireworks and firecrackers—Determination of calorific value of pyrotechnic powder 烟花爆竹 烟火药发热量的测定 - 英文版 |
|
|
|
GB/T 11066.11-2021 Methods for chemical analysis of gold-Part 11:Determination of magnesium，chromium，manganese，iron，nickel copper，palladium，silver，tin，antimony，lead and bismuth contents-Inductively coupled plasma mass spectrometry 金化学分析方法 第11部分：镁、铬、锰、铁、镍、铜、钯、银、锡、锑、铅和铋含量的测定 电感耦合等离子体质谱法 - 英文版 |
|
|
|
GB/T 9966.10-2021 Test methods for natural stone-Part 10:Determination of resistance to shaking for individual stone anchoragest 天然石材试验方法 第10部分：挂件组合单元抗震性能的测定 - 英文版 |
|
|
|
GB/T 39769-2021 Determination of forms of sulfur in coke 焦炭中各种形态硫的测定方法 - 英文版 |
|
|
|
GB/T 41076-2021 Microbeam analysis—Electron backscatter diffraction—Quantitative determination of austenite in steel 微束分析 电子背散射衍射 钢中奥氏体的定量分析 - 英文版 |
|
|
|
GB/T 1927.6-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage 无疵小试样木材物理力学性质试验方法 第6部分：干缩性测定 - 英文版 |
|
|
|
GB/T 261-2021 Determination of flash point—Pensky-Martens closed cup method 闪点的测定 宾斯基-马丁闭口杯法 - 英文版 |
|
|
|
GB/T 24328.6-2020 Tissue paper and tissue products—Part 6: Determination of water-absorption time and water-absorption capacity—Basket-immersion test method 卫生纸及其制品 第6部分: 吸水时间和吸水能力的测定 篮筐浸没法 - 英文版 |
|
|
|
GB/T 38612-2020 Test method of artificial leather and synthetic leather—Determination of tensile load and elongation at break 人造革合成革试验方法 拉伸负荷及断裂伸长率的测定 - 英文版 |
|
|
|
GB/T 38611-2020 Office furniture—Office work chairs—Test methods for the determination of stability, strength and durability 办公家具 办公工作椅 稳定性、强度和耐久性测试方法 - 英文版 |
|
|
|
GB/T 38608-2020 Method for determination of the volatile organic compounds (VOCs) content in the ink 油墨中可挥发性有机化合物（VOCs）含量的测定方法 - 英文版 |
|
|
|
GB/T 38607-2020 Office furniture—Tables and desks—Test methods for the determination of stability, strength and durability 办公家具 桌台类 稳定性、强度和耐久性测试方法 - 英文版 |
|
|
|
GB/T 9966.3-2020 Test methods for natural stone--Part 3: Determination of water absorption, bulk density, true density and true porosity 天然石材试验方法 第3部分：吸水率、体积密度、真密度、真气孔率试验 - 英文版 |
|
|
|
GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 - 英文版 |
|
|
|
GB/T 39356-2020 Determination of total nickel,total cobalt,total selenium, total vanadium, total stibium,total thallium in fertilizers — Inductively coupled plasma optical emission spectroscopy 肥料中总镍、总钴、总硒、总钒、总锑、总铊含量的测定 电感耦合等离子体发射光谱法 - 英文版 |
|
|
|
GB/T 9263-2020 Determination of slip resistance of anti-skid coatings 防滑涂料防滑性的测定 - 英文版 |
|
| Find out:521Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 |
+86-755-2583-1330
