China Determination of ess GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 13305-2024 Determination method of α-phase content in stainless steel 不锈钢中α-相含量测定法 - 英文版 |
 |
|
|
GB/T 24189-2024 Iron ore for blast furnaces - Determination of reducibility expressed as the final reduction index 高炉用铁矿石-用最终还原度指数表示的还原性的测定 - 英文版 |
|
|
|
GB/T 13930-2024 Water ring vacuum pumps and water ring compressors-Methods for determination of gas volume 水环真空泵和水环压缩机-气量测定方法 - 英文版 |
|
|
|
GB/T 43905.1-2024 Laboratory methods for sampling fumes and gases for welding and related processes - Part 1: Determination of emission rates of fumes from arc welding and collection of fumes for analysis 焊接及相关工艺中烟尘和气体取样的实验室方法-第1部分：电弧焊中烟尘排放速率的测定和分析用烟尘的收集 - 英文版 |
|
|
|
GB/T 43905.2-2024 Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定 - 英文版 |
|
|
|
GB/T 43905.3-2024 Laboratory methods for sampling fumes and gases for welding and related processes - Part 3: Determination of ozone emission rate during arc welding 焊接及相关工艺中烟尘和气体取样的实验室方法-第3部分：电弧焊中臭氧排放速率的测定 - 英文版 |
|
|
|
GB/T 43905.6-2024 Laboratory methods for sampling fumes and gases in welding and related processes - Part 6: Quantitative determination of fumes and gases in resistance spot welding 焊接及相关工艺中烟尘和气体取样的实验室方法-第6部分：电阻点焊中烟尘和气体的定量化测定 - 英文版 |
|
|
|
GB/T 22890.2-2024 Leather - Determination of water resistance of soft leather - Part 2: Repeated angular compression =Mezer method 皮革-柔软皮革防水性能的测定-第2部分：反复角压缩法（梅泽法） - 英文版 |
|
|
|
GB/T 22890.1-2024 Leather - Determination of water resistance of soft leather - Part 1: Repeated linear compression method (penetropyometer method) 皮革-柔软皮革防水性能的测定-第1部分：反复线压缩法（透度计法） - 英文版 |
|
|
|
GB/T 43748-2024 Microbeam analysis-Transmission electron microscopy-Method for determination of thickness of functional thin film layers in integrated circuit chips 微束分析-透射电子显微术-集成电路芯片中功能薄膜层厚度的测定方法 - 英文版 |
|
|
|
GB/T 23144-2023 Paper and paperboard Determination of bending stiffness General principles of the two-point, three-point and four-point methods 纸和纸板 弯曲挺度的测定 两点法、三点法和四点法的通用原理 - 英文版 |
|
|
|
GB/T 23538-2023 Ordinary abrasives - Determination method of ball milling toughness 普通磨料 球磨韧性测定方法 - 英文版 |
|
|
|
GB/T 43316.6-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 - 英文版 |
|
|
|
GB/T 43316.5-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 - 英文版 |
|
|
|
GB/T 43316.4-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 - 英文版 |
|
|
|
GB/T 43316.3-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 - 英文版 |
|
|
|
GB/T 43316.2-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile load method 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 - 英文版 |
|
|
|
GB/T 43316.1-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 1: General principles 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 - 英文版 |
|
|
|
GB/T 6881-2023 Acoustics - Determination of sound power level and sound energy level of noise sources by sound pressure method - Reverberation chamber precision method 声学 声压法测定噪声源声功率级和声能量级 混响室精密法 - 英文版 |
|
|
|
GB/T 43062-2023 Nuclear energy - Determination of neutron fluence and number of atomic dislocations (dpa) in reactor pressure vessels and internal components 核能 反应堆压力容器和堆内构件中子注量和原子离位次数（dpa）的确定 - 英文版 |
|
|
|
GB/T 43019.5-2023 Determination of water vapor transmission rate of plastic films and sheets Part 5: Pressure sensor method 塑料薄膜和薄片水蒸气透过率的测定 第5部分：压力传感器法 - 英文版 |
|
|
|
GB/T 29171-2023 Determination of rock capillary pressure curve 岩石毛管压力曲线的测定 - 英文版 |
|
|
|
GB/T 42670-2023 Determination method of Rockwell hardness of carbon materials 炭素材料洛氏硬度测定方法 - 英文版 |
|
|
|
GB/T 42924.4-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter. 塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法 - 英文版 |
|
|
|
GB/T 42924.1-2023 Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用 - 英文版 |
|
|
|
GB/T 40261.1-2023 Ergonomics of the thermal environment Assessment of the thermal environment in vehicles Part 1: Principles and methods of heat stress assessment and equivalent temperature determination 热环境的人类工效学 交通工具内热环境评价 第1部分:热应激评估原理与方法和等效温度测定 - 英文版 |
|
|
|
GB/T 42614-2023 Sliding bearings - Determination of the limit value of σ0.01* for metal flangeless thin-walled bearing shells 滑动轴承 金属无法兰薄壁轴瓦 σ0.01*极限值的测定 - 英文版 |
|
|
|
GB/T 28896-2023 Metallic materials - Test method for the determination of quasi-static fracture toughness of welded joints 金属材料 焊接接头准静态断裂韧度测定的试验方法 - 英文版 |
|
|
|
GB/T 42368-2023 Method for Determination of Explosive Limits of Combustible Gas (Steam) under High Temperature and High Pressure Conditions 高温高压条件下可燃气体（蒸气）爆炸极限测定方法 - 英文版 |
|
|
|
GB/T 1927.11-2022 Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain 无疵小试样木材物理力学性质试验方法 第11部分：顺纹抗压强度测定 - 英文版 |
|
|
|
GB/T 41567-2022 Textiles - Determination of fabric stiffness - Slot method 纺织品 织物硬挺度的测定 槽缝法 - 英文版 |
|
|
|
GB/T 1927.13-2022 Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity 无疵小试样木材物理力学性质试验方法 第13部分：横纹抗压弹性模量测定 - 英文版 |
|
|
|
GB/T 1481-2022 Determination of compressibility of metal powders (excluding cemented carbide powders) in uniaxial compaction 金属粉末(不包括硬质合金粉末) 在单轴压制中压缩性的测定 - 英文版 |
|
|
|
GB/T 13761.1-2022 Geosynthetics - Determination of thickness under specified pressure - Part 1: single layer products 土工合成材料 规定压力下厚度的测定 第1部分：单层产品 - 英文版 |
|
|
|
GB/T 11106-2022 Metallic powder—Determination of green strength by compression of cylinder compacts 金属粉末 用圆柱形压坯的压缩测定压坯强度的方法 - 英文版 |
|
|
|
GB/T 3222.2-2022 Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels 声学 环境噪声的描述、测量与评价 第2部分：声压级测定 - 英文版 |
|
|
|
GB/T 17248.1-2022 Acoustics—Noise emitted by machinery and equipment—Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions 声学 机器和设备发射的噪声 测定工作位置和其他指定位置发射声压级的基础标准使用导则 - 英文版 |
|
|
|
GB/T 6739-2022 Paints and varnishes - Determination of film hardness by the pencil method 色漆和清漆 铅笔法测定漆膜硬度 - 英文版 |
|
|
|
GB/T 42022-2022 Essential oils - Determination of water content - Karl Fischer method 精油 水分含量的测定 卡尔费休法 - 英文版 |
|
|
|
GB/T 42278-2022 Vulcanized rubber - Determination of hot tensile stress 硫化橡胶 热拉伸应力的测定 - 英文版 |
|
|
|
GB/T 42267-2022 Determination of compression set of flexible porous polymeric materials under wet conditions 柔性多孔聚合物材料 在潮湿条件下压缩永久变形的测定 - 英文版 |
|
|
|
GB/T 39693.8-2022 Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度 - 英文版 |
|
|
|
GB/T 39693.7-2022 Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度 - 英文版 |
|
|
|
GB/T 41940-2022 Rubber - Determination of Viscosity and Stress Relaxation with a Rotorless Closed Shear Rheometer 橡胶 用无转子密闭剪切流变仪测定黏度和应力松弛 - 英文版 |
|
|
|
GB/T 13477.23-2022 Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering 建筑密封材料试验方法 第23部分：人工加速气候老化下拉伸-压缩循环后耐久性的测定 - 英文版 |
|
|
|
GB/T 41932-2022 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 - 英文版 |
|
|
|
GB/T 41936.1-2022 Plastics - Determination of torsional stiffness of flexible materials - Part 1: General method 塑料 柔性材料扭转刚度的测定 第1部分:通用方法 - 英文版 |
|
|
|
GB/T 41898-2022 Determination of corrosion resistance and compactness of coatings on inner walls of food metal containers-electrochemical method 食品金属容器内壁涂覆层耐蚀力和致密性的测定 电化学法 - 英文版 |
|
|
|
GB/T 41762.2-2022 Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 - 英文版 |
|
|
|
GB/T 41980.2-2022 Hydraulic transmissions - Determination of pressure fluctuations in systems and components - Part 2: Hydraulic pumps (simplified method) 液压传动 系统和元件中压力波动的测定方法 第2部分：液压泵（简化法） - 英文版 |
|
| Find out:406Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 |
+86-755-2583-1330
