Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Determination of exp GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
     
GB/T 44027.2-2024
Determination method of carbon materials - Part 2: Determination of expansion rate
炭材料测定方法-第2部分:膨胀率的测定 - 英文版
GB/T 24189-2024
Iron ore for blast furnaces - Determination of reducibility expressed as the final reduction index
高炉用铁矿石-用最终还原度指数表示的还原性的测定 - 英文版
GB/T 43282.2-2023
Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer.
塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分:采用测定密闭呼吸计内需氧量的方法 - 英文版
GB/T 43282.1-2023
Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide.
塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分:采用分析释放二氧化碳的方法 - 英文版
GB/T 18950-2023
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties.
橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 - 英文版
GB/T 11417.8-2023
Ophthalmic optics Contact lenses Part 8: Determination of expiry date
眼科光学 接触镜 第8部分:有效期的确定 - 英文版
GB/T 42368-2023
Method for Determination of explosive Limits of Combustible Gas (Steam) under High Temperature and High Pressure Conditions
高温高压条件下可燃气体(蒸气)爆炸极限测定方法 - 英文版
GB/T 42175-2022
Determination of copper, lead, zinc, cadmium and chromium in drilling mud and drilling cuttings for offshore oil exploration and development Microwave digestion-inductively coupled plasma mass spectrometry
海洋石油勘探开发钻井泥浆和钻屑中铜、铅、锌、镉、铬的测定 微波消解-电感耦合等离子体质谱法 - 英文版
GB/T 11059-2022
Determination of vapor pressure of crude oil - Expansion method
原油蒸气压的测定 膨胀法 - 英文版
GB/T 40367-2021
Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide
塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法 - 英文版
GB/T 15596-2021
Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定 - 英文版
GB/T 9966.16-2021
Test methods for natural stone- Part 16:Determination of linear thermal expansion coefficient
天然石材试验方法 第16部分:线性热膨胀系数的测定 - 英文版
GB/T 38477-2020
Determination of gene expression—Western blot
基因表达的测定 蛋白印迹法 - 英文版
GB/T 7991.7-2019
Test method of viterous and porcelain enamels—Part 7:Determination of coefficient of mean lincar thermal expansion
搪玻璃层试验方法 第7部分:平均线热膨胀系数的测定 - 英文版
GB/T 7991.7-2019
Test method of viterous and porcelain enamels—Part 7:Determination of coefficient of mean lincar thermal expansion
搪玻璃层试验方法 第7部分:平均线热膨胀系数的测定 - 英文版
GB/T 13477.14-2019
Test method for building sealants-Part 14:Determination of resistance to prolonged exposure to water
建筑密封材料试验方法 第14部分:浸水及拉伸-压缩循环后粘结性的测定 - 英文版
GB/T 13893.2-2019
Paints and varnishes—Determination of resistance to humidity—Part 2: Condensation(in-cabinet exposure with heated water reservoir)
色漆和清漆 耐湿性的测定 第2部分:冷凝(在带有加热水槽的试验箱内曝露) - 英文版
GB/T 16425-2018
Determination for minimum explosive concentration of dust clouds
粉尘云爆炸下限浓度测定方法 - 英文版
GB/T 11349.1-2018
Mechanical vibration and shock—Experimental determination of mechanical mobility—Part 1: Basic terms and definitions, and transducer specifications
机械振动与冲击 机械导纳的试验确定 第1部分:基本术语与定义、传感器特性 - 英文版
GB/T 36800.2-2018
Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
塑料 热机械分析法(TMA) 第2部分:线性热膨胀系数和玻璃化转变温度的测定 - 英文版
GB/T 7320-2018
Refractories—Determination of thermal expansion
耐火材料 热膨胀试验方法 - 英文版
GB/T 36134-2018
Monolithic(unshaped) refractory products—Determination of resistance to explosive spalling during heating
不定形耐火材料 抗爆裂性试验方法 - 英文版
GB/T 34183-2017
Thermal insulating products for building equipment and industrial installations—Determination of the coefficient of thermal expansion
建筑设备及工业装置用绝热制品 热膨胀系数的测定 - 英文版
GB/T 13477.15-2017
Test method for building sealants—Part 15:Determination of adhesion/cohesion properties after exposure to heat and artificial light through glass and to water
建筑密封材料试验方法 第15部分:经过热、透过玻璃的人工光源和水曝露后粘结性的测定 - 英文版
GB/T 12000-2017
Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist
塑料 暴露于湿热、水喷雾和盐雾中影响的测定 - 英文版
GB/T 33293-2016
Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
常压下油井水泥收缩与膨胀的测定 - 英文版
GB 31604.22-2016
National Food Safety Standard-Food contact materials and products-Determination of Difluorodichloromethane in Expanded Polystyrene Moldings
食品安全国家标准 食品接触材料及制品 发泡聚苯乙烯成型品中二氟二氯甲烷的测定 - 英文版
GB/T 3074.4-2016
Method for the determination of the coefficient of thermal expansion of graphite electrodes
石墨电极热膨胀系数(CTE)测定方法 - 英文版
GB/T 3810.8-2016
Test methods of ceramic tiles—Part 8: Determination of linear thermal expansion
陶瓷砖试验方法 第8部分:线性热膨胀的测定 - 英文版
GB/T 3810.10-2016
Test methods of ceramic tiles—Part 10: Determination of moisture expansion
陶瓷砖试验方法 第10部分:湿膨胀的测定 - 英文版
GB/T 16920-2015
Glass—Determination of coefficient of mean linear thermal expansion
玻璃 平均线热膨胀系数的测定 - 英文版
GB/T 21230-2014
Acoustics―Determination of occupational noise exposure―Engineering method
声学 职业噪声暴露的测定 工程法 - 英文版
GB/T 30705-2014
Microbeam analysis―Electron probe microanalysis―Guidelines for the Determination of experimental parameters for wavelength dispersive spectroscopy
微束分析 电子探针显微分析 波谱法实验参数测定导则 - 英文版
GB/T 30086-2013
Determination of axial coefficient of linear expansion of plastics pipes for water supply
给水塑料管道轴向线膨胀系数试验方法 - 英文版
GB/T 29173-2012
Determination method for samples of geochemical exploration for oil and gas
油气地球化学勘探试样测定方法 - 英文版
GB/T 11059-2011
Standard test method for determination of vapor pressure of crude oil:VPCRx (expansion method)
原油蒸气压的测定 膨胀法 - 英文版
GB/T 25851.1-2010
Mobile cranes - Experimental determination of crane performance Part1: Tipping loads and radii
流动式起重机 起重机性能的试验测定 第1部分:倾翻载荷和幅度 - 英文版
GB/T 25950-2010
Aluminium ores - Experimental determination of the heterogeneity of constitution
铝土矿 成分不均匀性的实验测定 - 英文版
GB/T 25944-2010
Aluminium ores - Experimental determination of the heterogeneity of distribution of a lot
铝土矿 批中不均匀性的实验测定 - 英文版
GB/T 25144-2010
Determination of coefficient of mean linear thermal expansion for vitreous and porcelain enamels
搪玻璃釉平均线热膨胀系数的测定方法 - 英文版
GB/T 15596-2009
Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass,natural weathering or laboratory light sources
塑料在玻璃下日光、自然气候或实验室光源暴露后颜色和性能变化的测定 - 英文版
GB/T 22906.8-2008
Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
纸芯的测定 第8部分:固有频率和弹性模量的测定(试验模型分析法) - 英文版
GB/T 5028-2008
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
金属材料 薄板和薄带 拉伸应变硬化指数(n值)的测定 - 英文版
GB/T 22500-2008
Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction
动植物油脂 紫外吸光度的测定 - 英文版
GB/T 9582-2008
Photography - Industrial radiographic films - Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X-and Gamma-radiation
摄影 工业射线胶片 ISO感光度,ISO平均斜率和ISO斜率G2和G4的测定(用X和γ射线曝光) - 英文版
GB/T 7790-2008
Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water
色漆和清漆 暴露在海水中的涂层耐阴极剥离性能的测定 - 英文版
GB/T 803-2008
Determination of explosion indices of combustible gases in air
空气中可燃气体爆炸指数测定方法 - 英文版
GB/T 7320-2008
Refractories - Determination of thermal expansion
耐火材料 热膨胀试验方法 - 英文版
GB/T 21848-2008
Chemical products for industrial use - Determination of explosion risk
工业用化学品 爆炸危险性的确定 - 英文版
GB/T 20673-2006
Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
硬质泡沫塑料 低于环境温度的线膨胀系数的测定 - 英文版

Find out:73Items   |  To Page of: First -Previous-Next -Last  | 1 2

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved