China Plastics pipes and f GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 29047-2021 Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 - 英文版 |
 |
|
|
GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统 热塑性塑料管材 环柔性的测定 - 英文版 |
|
|
|
GB/T 20674.4-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 4: Traceability coding 塑料管材和管件 聚乙烯系统熔接设备 第4部分：可追溯编码 - 英文版 |
|
|
|
GB/T 20674.3-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 3:Operator's badge 塑料管材和管件 聚乙烯系统熔接设备 第3部分：操作者代码 - 英文版 |
|
|
|
GB/T 20674.2-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 - 英文版 |
|
|
|
GB/T 20674.1-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 - 英文版 |
|
|
|
GB/T 37263-2018 Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管 - 英文版 |
|
|
|
GB/T 32378-2015 Glass-reinforced thermosetting plastics (GRP) pipes—Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 玻璃纤维增强热固性塑料（GRP）管 湿态环境下长期极限弯曲应变和长期极限相对环变形的测定 - 英文版 |
|
|
|
GB/T 32434-2015 Plastics pipes and fittings—Butt fusion jointing procedures fortpolyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 塑料管材和管件 燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序 - 英文版 |
|
|
|
GB/T 29047-2012 Prefabricated directly buried insulating pipes and fittings with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 - 英文版 |
|
|
|
GB/T 28799.2-2012 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯（PE-RT）管道系统 第2部分：管材 - 英文版 |
|
|
|
GB/T 26500-2011 General technical specification for pipes and fittings lined with fluoroplastics 氟塑料衬里钢管、管件通用技术要求 - 英文版 |
|
|
|
GB/T 23241-2009 Plastics pipes and fittings used for irrigation basic parameters and technical requirements 灌溉用塑料管材和管件基本参数及技术条件 - 英文版 |
|
|
|
GB/T 4217-2008 Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures 流体输送用热塑性塑料管材 公称外径和公称压力 - 英文版 |
|
|
|
GB/T 4219.1-2008 Plastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes 工业用硬聚氯乙烯(PVC-U)管道系统 第1部分：管材 - 英文版 |
|
|
|
GB/T 21300-2007 Plastics pipes and fittings - Determination of opacity 塑料管材和管件 不透光性的测定 - 英文版 |
|
|
|
GB/T 20674.2-2006 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 - 英文版 |
|
|
|
GB/T 20674.1-2006 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 - 英文版 |
|
|
|
GB/T 19993-2005 Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 - 英文版 |
|
|
|
GB/T 19809-2005 Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 - 英文版 |
|
|
|
GB/T 19808-2005 Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 - 英文版 |
|
|
|
GB/T 19807-2005 Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 - 英文版 |
|
|
|
GB/T 19806-2005 Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验 - 英文版 |
|
|
|
GB/T 19712-2005 Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 - 英文版 |
|
|
|
GB/T 19471.1-2004 Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 - 英文版 |
|
|
|
GB/T 18991-2003 ThermoPlastics pipes and fittings forhot and cold water systems 冷热水系统用热塑性塑料管材和管件 - 英文版 |
|
|
|
GB/T 8802-2001 ThermoPlastics pipes and fitting--Determination of vicat softening temperature 热塑性塑料管材、管件 维卡软化温度的测定 - 英文版 |
|
|
|
GB/T 18475-2001 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient 热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 - 英文版 |
|
|
|
GB/T 15560-1995 Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids 流体输送用塑料管材液压瞬时爆破和耐压试验方法 - 英文版 |
|
| Find out:29Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-2583-1330
