China Polyethylene pipes f GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 15558.2-2023 Buried polyethylene (PE) piping systems for gas use Part 2: Pipes 燃气用埋地聚乙烯（PE）管道系统 第2部分：管材 - 英文版 |
 |
|
|
GB/T 19812.6-2022 Plastic water-saving irrigation equipment - Part 6: Polyethylene (PE) pipes for water delivery 塑料节水灌溉器材 第6部分：输水用聚乙烯（PE）管材 - 英文版 |
|
|
|
GB/T 29047-2021 Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 - 英文版 |
|
|
|
GB/T 40967-2021 Polyethylene(PE)pipes and fittings for nuclear power plants 核电厂用聚乙烯（PE）管材及管件 - 英文版 |
|
|
|
GB/T 28799.2-2020 Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 2: Pipes 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分：管材 - 英文版 |
|
|
|
GB/T 20674.4-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 4: Traceability coding 塑料管材和管件 聚乙烯系统熔接设备 第4部分：可追溯编码 - 英文版 |
|
|
|
GB/T 20674.3-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 3:Operator's badge 塑料管材和管件 聚乙烯系统熔接设备 第3部分：操作者代码 - 英文版 |
|
|
|
GB/T 20674.2-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 - 英文版 |
|
|
|
GB/T 20674.1-2020 Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 - 英文版 |
|
|
|
GB/T 19472.1-2019 Polyethylene structure wall pipeline system for underground usage—Part 1: Polyethylene double wall corrugated pipes 埋地用聚乙烯（PE）结构壁管道系统 第1部分：聚乙烯双壁波纹管材 - 英文版 |
|
|
|
GB/T 37263-2018 Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管 - 英文版 |
|
|
|
GB/T 13663.2-2018 Polyethylene(PE) piping systems for water supply—Part2: Pipes 给水用聚乙烯（PE）管道系统 第2部分：管材 - 英文版 |
|
|
|
GB/T 34611-2017 Rigid polyurethane spray polyethylene winding prefabricated directly buried insulating pipes 硬质聚氨酯喷涂聚乙烯缠绕预制直埋保温管 - 英文版 |
|
|
|
GB/T 19472.2-2017 Polyethylene structure-wall piping systems for underground usage—Part2: Polyethylene spirally enwound structure-wall pipes 埋地用聚乙烯（PE）结构壁管道系统 第2部分：聚乙烯缠绕结构壁管材 - 英文版 |
|
|
|
GB 15558.1-2015 Buried polyethylene(PE) piping systems for the supply of gaseous fuels—Part 1 :Pipes 燃气用埋地聚乙烯（PE）管道系统 第1部分：管材 - 英文版 |
|
|
|
GB/T 32434-2015 Plastics pipes and fittings—Butt fusion jointing procedures fortpolyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems 塑料管材和管件 燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序 - 英文版 |
|
|
|
GB/T 29047-2012 Prefabricated directly buried insulating pipes and fittings with polyurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 - 英文版 |
|
|
|
GB/T 29460-2012 Safey assessment for electrofusion joint of polyethylene pipes containing defects 含缺陷聚乙烯管道电熔接头安全评定 - 英文版 |
|
|
|
GB/T 28799.2-2012 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯（PE-RT）管道系统 第2部分：管材 - 英文版 |
|
|
|
GB 26255.2-2010 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 2: Metal fittings for pipes of nominal outside diameter greaten than 63mm 燃气用聚乙烯管道系统的机械管件 第2部分：公称外径大于63mm的管材用钢塑转换管件 - 英文版 |
|
|
|
GB 26255.1-2010 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 1:Metal fittings for pipes of nominal outside diameter less than or equal to 63mm 燃气用聚乙烯管道系统的机械管件 第1部分：公称外径不大于63mm的管材用钢塑转换管件 - 英文版 |
|
|
|
GB/T 20674.2-2006 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 - 英文版 |
|
|
|
GB/T 20674.1-2006 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 - 英文版 |
|
|
|
GB/T 20201-2006 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes 灌溉用聚乙烯(PE)压力管机械连接管件 - 英文版 |
|
|
|
GB/T 15819-2006 Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 - 英文版 |
|
|
|
GB/T 19796-2005 Agricultural irrigation equipment-Plastics saddles for polyethylene pressure pipes 农业灌溉设备 聚乙烯承压管用塑料鞍座 - 英文版 |
|
|
|
GB/T 19809-2005 Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 - 英文版 |
|
|
|
GB/T 19808-2005 Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 - 英文版 |
|
|
|
GB/T 19807-2005 Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 - 英文版 |
|
|
|
GB/T 19806-2005 Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验 - 英文版 |
|
|
|
GB/T 19712-2005 Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 - 英文版 |
|
|
|
GB/T 19472.2-2004 Polyethylene structure-wall piping system for underground usage--Part 2:Polyethylene spirally enwound structure-wall pipes 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材 - 英文版 |
|
|
|
GB/T 19472.1-2004 Polyethylene structure wall pipeline system for underground usage--Part 1:Polyethylene double wall corrugated pipes 埋地用聚乙烯(PE)结构壁管道系统 第1部分:聚乙烯双壁波纹管材 - 英文版 |
|
|
|
GB 15558.1-2003 Buried polyethylene(PE)piping systems for the supply of gaseous fuels--Part 1:Pipes 燃气用埋地聚乙烯(PE)管道系统 第1部分:管材 - 英文版 |
|
|
|
GB/T 18992.2-2003 Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations--Part 2: Pipes 冷热水用交联聚乙烯(PE-X)管道系统 第2部分:管材 - 英文版 |
|
|
|
GB/T 18474-2001 Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content 交联聚乙烯(PE-X)管材与管件 交联度的试验方法 - 英文版 |
|
|
|
GB/T 13663-2000 Polyethylene pipes for water supply 给水用聚乙烯(PE)管材 - 英文版 |
|
|
|
GB/T 17391-1998 Test method for thermal stability of polyethylene pipes and fittings 聚乙烯管材与管件热稳定性试验方法 - 英文版 |
|
|
|
GB/T 15820-1995 Test of resistance to pull out ofjoints between polyethylene (PE) pressure pipes and fittings 聚乙烯压力管材与管件连接的耐拉拔试验 - 英文版 |
|
|
|
GB/T 13021-1991 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis 聚乙烯管材和管件炭黑含量的测定 热失重法 - 英文版 |
|
| Find out:40Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-2583-1330
