China Powders-Determinatio GB Standards Search Result |
1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
GB/T 44149-2024 Fine ceramics-Determination of isoelectric point of ceramic powders-zeta potential method 精细陶瓷-陶瓷粉体等电点的测定-zeta电位法 - 英文版 |
||
GB/T 43096-2023 Metal powders. Determination of external specific surface area by powder layer permeability test under steady flow conditions. 金属粉末 稳态流动条件下粉末层透过性试验测定外比表面积 - 英文版 |
||
GB/T 42515-2023 Metal powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders 金属粉末 铁、铜、锡和青铜粉末中酸不溶物含量的测定 - 英文版 |
||
GB/T 1481-2022 Determination of compressibility of metal powders (excluding cemented carbide powders) in uniaxial compaction 金属粉末(不包括硬质合金粉末) 在单轴压制中压缩性的测定 - 英文版 |
||
GB/T 41329-2022 Determination of the flowability of metal powders Standard funnel method (Gustafsson flowmeter) 金属粉末流动性的测定 标准漏斗法(古斯塔弗森流速计) - 英文版 |
||
GB/T 1482-2022 Metal powders - Determination of fluidity - Standard funnel method (Hall flow meter) 金属粉末 流动性的测定 标准漏斗法(霍尔流速计) - 英文版 |
||
GB/T 42240-2022 Nanotechnology Determination of metallic impurities in graphene powders Inductively coupled plasma mass spectrometry 纳米技术 石墨烯粉体中金属杂质的测定 电感耦合等离子体质谱法 - 英文版 |
||
GB/T 41706-2022 Metal powders - Determination of non-metallic inclusions in metal powders for powder forging 金属粉末 粉末锻造用金属粉末中非金属夹杂物的测定方法 - 英文版 |
||
GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第2部分:高温时流速的测定 - 英文版 |
||
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第1部分:高温时松装密度的测定 - 英文版 |
||
GB/T 5162-2021 Metallic powders—Determination of tap density 金属粉末 振实密度的测定 - 英文版 |
||
GB/T 39696-2020 Determination of flowability of fine ceramic powders—Calibrated funnel 精细陶瓷粉末流动性测定 标准漏斗法 - 英文版 |
||
GB/T 36086-2018 Nanotechnology—Determination of contact angles of nanopowders—Washburn dynamic pressure method 纳米技术 纳米粉体接触角测量 Washburn动态压力法 - 英文版 |
||
GB/T 1479.3-2017 Metallic powders-Determination of apparent density-Part 3: Oscillating funnel method 金属粉末 松装密度的测定 第3部分:振动漏斗法 - 英文版 |
||
GB/T 5159-2015 Metallic powders,excluding powders for hardmetals—Determination of dimensional changes associated with compacting and sintering 金属粉末(不包括硬质合金用粉) 与成型和烧结有联系的尺寸变化的测定方法 - 英文版 |
||
GB/T 5161-2014 Metallic powders―Determination of effective density―Liquid immersion method 金属粉末 有效密度的测定 液体浸透法 - 英文版 |
||
GB/T 1481-2012 Metallic powders (excluding powders for hardmetals) - Determination of compressibility in uniaxial compression 金属粉末(不包括硬质合金粉末)在单轴压制中压缩性的测定 - 英文版 |
||
GB/T 1480-2012 Metallic powders - Determination of particle size by dry sieving 金属粉末 干筛分法测定粒度 - 英文版 |
||
GB/T 5158.4-2011 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction 金属粉末 还原法测定氧含量 第4部分:还原-提取法测定总氧量 - 英文版 |
||
GB/T 5158.3-2011 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen 金属粉末 还原法测定氧含量 第3部分:可被氢还原的氧 - 英文版 |
||
GB/T 5158.2-2011 Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction(hydrogen loss) 金属粉末 还原法测定氧含量 第2部分:氢还原时的质量损失(氢损) - 英文版 |
||
GB/T 5158.1-2011 Metallic powders - Determination of oxygen content by reduction methods - Part 1: General guidelines 金属粉末 还原法测定氧含量 第1部分:总则 - 英文版 |
||
GB/T 1479.2-2011 Metallic powders - Determination of apparent density - Part 2: Scott volumeter method 金属粉末 松装密度的测定 第2部分:斯柯特容量计法 - 英文版 |
||
GB/T 1479.1-2011 Metallic powders - Determination of apparent density - Part 1: funnal method 金属粉末 松装密度的测定 第1部分:漏斗法 - 英文版 |
||
GB/T 26051-2010 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method 硬质合金 钴粉中硫和碳量的测定 红外检测法 - 英文版 |
||
GB/T 1482-2010 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) 金属粉末 流动性的测定 标准漏斗法(霍尔流速计) - 英文版 |
||
GB/T 21782.5-2010 Coating powders - Part 5:Determination of flow properties of a powder/air mixture 粉末涂料 第5部分:粉末空气混合物流动性的测定 - 英文版 |
||
GB/T 21782.12-2010 Coating powders - Part 12:Determination of compatibility 粉末涂料 第12部分:相容性的测定 - 英文版 |
||
GB/T 4164-2008 Metallic powders - Determination of hydrogen reducible oxygen content 金属粉末中可被氢还原氧含量的测定 - 英文版 |
||
GB/T 21782.7-2008 Coating powders - Part 7:Determination of loss of mass on stoving 粉末涂料 第7部分:烘烤时质量损失的测定法 - 英文版 |
||
GB/T 21782.3-2008 Coating powders - Part 3:Determination of density by liquid displacement pyknometer 粉末涂料 第3部分:液体置换比重瓶法测定密度 - 英文版 |
||
GB/T 21782.2-2008 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) 粉末涂料 第2部分:气体比较比重仪法测定密度(仲裁法) - 英文版 |
||
GB/T 21782.1-2008 Coating powders - Part 1: Determination of particle size distribution by sieving 粉末涂料 第1部分:筛分法测定粒度分布 - 英文版 |
||
GB/T 21782.10-2008 Coating powders - Part 10:Determination of deposition efficiency 粉末涂料 第10部分:沉积效率的测定 - 英文版 |
||
GB/T 21774-2008 Coating powders - Determination of stoving condition 粉末涂料 烘烤条件的测定 - 英文版 |
||
GB/T 21354-2008 Powders-Determination of tap density 粉末产品振实密度测定通用方法 - 英文版 |
||
GB/T 20966-2007 Determination of particle size distribution for colliery powders 煤矿粉尘粒度分布测定方法 - 英文版 |
||
GB/T 5162-2006 Metallic powders - Determination of tap density 金属粉末 振实密度的测定 - 英文版 |
||
GB/T 20117-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 - 英文版 |
||
GB/T 6524-2003 Metallic powders--Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement 金属粉末 粒度分布的测量 重力沉降光透法 - 英文版 |
||
GB/T 5160-2002 Metallic powders--Determination of green strength by transverse rupture of rectangular compacts 金属粉末生坯强度的测定 矩形压坯横向断裂法 - 英文版 |
||
GB/T 223.34-2000 Methods for chemical analysis of iron,steel and alloy--The determination of hydrochloric acid-insoluble content of iron powders 钢铁及合金化学分析方法 铁粉中盐酸不溶物的测定 - 英文版 |
||
GB/T 5061-1998 Metallic powders--Determination of apparent den-sity--Part 3:Oscillating funnel method 金属粉末松装密度的测定 第3部分:振动漏斗法 - 英文版 |
||
GB/T 13373-1992 Determination of gadolinium,samarium,dysprosium and europium in uranium dioxide powders and pellets by horizontal ICP-AES 二氧化铀粉末和芯块中钆、钐、镝和铕的测定 水平式ICP-AES 法 - 英文版 |
||
GB/T 13372-1992 Determination of traceelements in uranium dioxide powders and pellets by ICP-AES 二氧化铀粉末和芯块中杂质元素的测定 ICP-AES 法 - 英文版 |
||
GB/T 13371-1992 Determination of copper,iron,nickel,magnesium,manganese, zinc and silver in uranium dioxide powders and pellets by atomic absorption spectrophotometry 二氧化铀粉末和芯块中铜、铁、镍、镁、锰、锌、银的测定 原子吸收分光光度法 - 英文版 |
||
GB/T 13370-1992 Determination of lithium,sodium,potassium and cesium in uranium dioxidepowders and pellets by atomic absorption spectrophotometry/flame emission spectrophotometry 二氧化铀粉末和芯块中锂、钠、钾、铯的测定 原子吸收分光光度法/ 火焰发射光谱法 - 英文版 |
Find out:47Items | To Page of: First -Previous-Next -Last | 1 |