China Rubber and plastics GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 5568-2022 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 英文版 |
 |
|
|
GB/T 41931-2022 Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 - 英文版 |
|
|
|
GB/T 38687-2020 Rubber and plastics machinery—Communicating protocol for auxiliary equipment 橡胶塑料机械 外围设备通信协议 - 英文版 |
|
|
|
GB/T 25156-2020 General specifications and inspection methods of Rubber and plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 - 英文版 |
|
|
|
GB/T 38533-2020 Injection moulding machines for Rubber and plastics—Mould fixing and connection dimensions 橡胶塑料注射成型机 模具固定和联接尺寸 - 英文版 |
|
|
|
GB/T 39483.2-2020 Rubber and plastics injection moulding machine—Interface—Part 2:Data exchange interface 橡胶塑料注射成型机 接口 第2部分：数据交换接口 - 英文版 |
|
|
|
GB/T 39483.1-2020 Rubber and plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 - 英文版 |
|
|
|
GB/T 39327-2020 Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 - 英文版 |
|
|
|
GB/T 39249-2020 Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 - 英文版 |
|
|
|
GB/T 14905-2020 Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 - 英文版 |
|
|
|
GB/T 9576-2019 Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 - 英文版 |
|
|
|
GB/T 36587-2018 Rubber and plastics machinery—Terminology 橡胶塑料机械 术语 - 英文版 |
|
|
|
GB/T 5565.2-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 - 英文版 |
|
|
|
GB/T 9574-2017 Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 - 英文版 |
|
|
|
GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 - 英文版 |
|
|
|
GB/T 5565.1-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 - 英文版 |
|
|
|
GB/T 12784-2017 Pressurized kneader for Rubber and plastics 橡胶塑料加压式捏炼机 - 英文版 |
|
|
|
GB/T 33580-2017 Testing and measuring methods of energy consumption for Rubber and plastics extruder 橡胶塑料挤出机能耗检测方法 - 英文版 |
|
|
|
GB/T 32456-2015 General specifications for electromagnetic of induction heating energy-saving systems used for Rubber and plastics machines 橡胶塑料机械用电磁加热节能系统通用技术条件 - 英文版 |
|
|
|
GB/T 30200-2013 Test method for energy consumption of Rubber and plastics injection moulding machines 橡胶塑料注射成型机能耗检测方法 - 英文版 |
|
|
|
GB/T 9572-2013 Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity 橡胶和塑料软管及软管组合件 电阻和导电性的测定 - 英文版 |
|
|
|
GB/T 5568-2013 Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 英文版 |
|
|
|
GB/T 5567-2013 Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 - 英文版 |
|
|
|
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing 橡胶和塑料软管及软管组合件 静液压试验方法 - 英文版 |
|
|
|
GB/T 18422-2013 Rubber and plastics hoses and hose assemblies—Determination of permeability to gas 橡胶和塑料软管及软管组合件 透气性的测定 - 英文版 |
|
|
|
GB 29993-2013 Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 - 英文版 |
|
|
|
GB/T 9576-2013 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 - 英文版 |
|
|
|
GB/T 9575-2013 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差 - 英文版 |
|
|
|
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法 - 英文版 |
|
|
|
GB/T 18423-2013 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 - 英文版 |
|
|
|
GB/T 28605-2012 Rubber and plastics tubing and hoses and hose assemblies for drinking water 生活饮用水用橡胶或塑料软管和非增强软管及软管组合件 - 英文版 |
|
|
|
GB 25936.3-2012 Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders 橡胶塑料粉碎机械 第3部分：切碎机安全要求 - 英文版 |
|
|
|
GB 25936.2-2012 Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers 橡胶塑料粉碎机械 第2部分：拉条式切粒机安全要求 - 英文版 |
|
|
|
GB 25936.1-2012 Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators 橡胶塑料粉碎机械 第1部分：刀片式破碎机安全要求 - 英文版 |
|
|
|
GB/T 7528-2011 Rubber and plastics hoses and hose assemblies - Vocabulary 橡胶和塑料软管及软管组合件 术语 - 英文版 |
|
|
|
GB/T 14904-2011 Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验 - 英文版 |
|
|
|
GB 25936.4-2010 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators 橡胶塑料粉碎机械 第4部分：团粒机安全要求 - 英文版 |
|
|
|
GB 25431.3-2010 Extruders and extrusion lines for Rubber and plastics - Part 3：Safety requirements for haul-offs 橡胶塑料挤出机和挤出生产线 第3部分：牵引装置的安全要求 - 英文版 |
|
|
|
GB 25431.2-2010 Extruders and extrusion lines for Rubber and plastics - Part 2 :Safety requirements for die face pelletizers 橡胶塑料挤出机和挤出生产线 第2部分：模面切粒机的安全要求 - 英文版 |
|
|
|
GB 25431.1-2010 Extruders and extrusion lines for Rubber and plastics - Part 1: Safety requirements for extruders 橡胶塑料挤出机和挤出生产线 第1部分：挤出机的安全要求 - 英文版 |
|
|
|
GB/T 13578-2010 Rubber and plastics calender 橡胶塑料压延机 - 英文版 |
|
|
|
GB/T 25270-2010 Rubber and plastics test equipment - Tensile,flexural and compression types(constant rate of traverse) - Specification 橡胶塑料的拉伸、屈挠和压缩试验设备（恒速移动型） 技术要求 - 英文版 |
|
|
|
GB/T 25157-2010 Inspections methods of injection moulding machines for Rubber and plastics 橡胶塑料注射成型机检测方法 - 英文版 |
|
|
|
GB/T 25156-2010 General specifications of injection moulding machines for Rubber and plastics 橡胶塑料注射成型机通用技术条件 - 英文版 |
|
|
|
GB/T 24144-2009 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies 消防软管 橡胶和塑料吸引软管和软管组合件 - 英文版 |
|
|
|
GB/T 24134-2009 Rubber and plastics hoses - Assessment of ozone resistance under static conditions 橡胶和塑料软管 静态条件下耐臭氧性能的评价 - 英文版 |
|
|
|
GB/T 24133-2009 Rubber-or plastics-coated fabrics - Standard atmospheres for conditioning and testing 橡胶或塑料涂覆织物 调节和试验的标准环境 - 英文版 |
|
|
|
GB/T 24126-2009 Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel 橡胶和塑料软管及软管组合件 采购者、组装者、安装者和操作者使用指南 - 英文版 |
|
|
|
GB/T 14905-2009 Rubber and plastics hoses - Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 - 英文版 |
|
|
|
GB/T 6343-2009 Cellular plastics and rubbers - Determination of apparent density 泡沫塑料及橡胶 表观密度的测定 - 英文版 |
|
| Find out:75Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
