China Rubber hoses and hos GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 3683-2023 Specification for Rubber hoses and hose assemblies, wire braid reinforced hydraulic types suitable for oil-based or water-based fluids 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范 - 英文版 |
 |
|
|
GB/T 18950-2023 Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 - 英文版 |
|
|
|
GB/T 10544-2022 Rubber hoses and hose assemblies—Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝缠绕增强外覆橡胶液压型 规范 - 英文版 |
|
|
|
GB/T 24146-2022 Rubber hoses and hose assemblies for use in oil burners—Specification 用于油燃烧器的橡胶软管和软管组合件 规范 - 英文版 |
|
|
|
GB/T 24141.2-2022 Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 - 英文版 |
|
|
|
GB/T 5568-2022 Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 英文版 |
|
|
|
GB/T 39327-2020 Rubber and plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 - 英文版 |
|
|
|
GB/T 39313-2020 Rubber hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范 - 英文版 |
|
|
|
GB/T 39309-2020 Rubber hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范 - 英文版 |
|
|
|
GB/T 39249-2020 Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 - 英文版 |
|
|
|
GB/T 14905-2020 Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 - 英文版 |
|
|
|
GB/T 15329-2019 Rubber hoses and hose assemblies—Textile-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的织物增强液压型 规范 - 英文版 |
|
|
|
GB/T 9576-2019 Rubber and plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 - 英文版 |
|
|
|
GB/T 37221-2018 Self-floating Rubber hoses and hose assemblies for dredging applications 自浮式排泥橡胶软管及软管组合件 - 英文版 |
|
|
|
GB/T 5565.2-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 - 英文版 |
|
|
|
GB/T 9574-2017 Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 - 英文版 |
|
|
|
GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 - 英文版 |
|
|
|
GB/T 5565.1-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 - 英文版 |
|
|
|
GB/T 18948-2017 Rubber hoses and tubing for cooling systems for internal-combustion engines—Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 - 英文版 |
|
|
|
GB/T 33382-2016 Inner armoured Rubber hoses and hose assemblies for conveying dredging soil 内铠装输泥橡胶软管及软管组合件 - 英文版 |
|
|
|
GB/T 32476-2016 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system 具有油气回收功能的计量分配燃油用橡胶和塑料软管及软管组合件 - 英文版 |
|
|
|
GB/T 32474-2016 Rubber hoses and hose assemblies for petroleum drilling well control equipments 石油钻井井控设备用橡胶软管及软管组合件 - 英文版 |
|
|
|
GB/T 2550-2016 Gas welding equipment—Rubber hoses for welding, cutting and allied processes 气体焊接设备 焊接、切割和类似作业用橡胶软管 - 英文版 |
|
|
|
GB 10543-2014 Rubber hoses and hose assemblies for aircraft ground fuelling and defueling―Specification 飞机地面加油和排油用橡胶软管及软管组合件 规范 - 英文版 |
|
|
|
GB/T 18425-2014 Rubber hoses and hose assemblies for steam―Test methods 蒸汽橡胶软管和软管组合件 试验方法 - 英文版 |
|
|
|
GB/T 9572-2013 Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity 橡胶和塑料软管及软管组合件 电阻和导电性的测定 - 英文版 |
|
|
|
GB/T 5568-2013 Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 - 英文版 |
|
|
|
GB/T 5567-2013 Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 - 英文版 |
|
|
|
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing 橡胶和塑料软管及软管组合件 静液压试验方法 - 英文版 |
|
|
|
GB/T 18422-2013 Rubber and plastics hoses and hose assemblies—Determination of permeability to gas 橡胶和塑料软管及软管组合件 透气性的测定 - 英文版 |
|
|
|
GB/T 10544-2013 Rubber hoses and hose assemblies—Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝缠绕增强外覆橡胶液压型 规范 - 英文版 |
|
|
|
GB 29993-2013 Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 - 英文版 |
|
|
|
GB/T 9576-2013 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 - 英文版 |
|
|
|
GB/T 9575-2013 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差 - 英文版 |
|
|
|
GB/T 9573-2013 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies 橡胶和塑料软管及软管组合件 软管尺寸和软管组合件长度测量方法 - 英文版 |
|
|
|
GB/T 18423-2013 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 - 英文版 |
|
|
|
GB/T 16591-2013 Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification 输送无水氨用橡胶软管及软管组合件 规范 - 英文版 |
|
|
|
GB/T 10546-2013 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa - Specification 在 2.5MPa及以下压力下输送液态或气态液化石油气（LPG）和天然气的橡胶软管及软管组合件 规范 - 英文版 |
|
|
|
GB/T 28605-2012 Rubber and plastics tubing and hoses and hose assemblies for drinking water 生活饮用水用橡胶或塑料软管和非增强软管及软管组合件 - 英文版 |
|
|
|
GB/T 7528-2011 Rubber and plastics hoses and hose assemblies - Vocabulary 橡胶和塑料软管及软管组合件 术语 - 英文版 |
|
|
|
GB/T 14904-2011 Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验 - 英文版 |
|
|
|
GB/T 3683-2011 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范 - 英文版 |
|
|
|
GB/T 24146-2009 Rubber hoses and hose assemblies for use in oil burners - Specification 用于油燃烧器的橡胶软管和软管组合件 规范 - 英文版 |
|
|
|
GB/T 24145-2009 Rubber hoses and hose assemblies for rotary drilling and vibration application - Specification 旋转钻探和减震用橡胶软管和软管组合件 规范 - 英文版 |
|
|
|
GB/T 24144-2009 Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies 消防软管 橡胶和塑料吸引软管和软管组合件 - 英文版 |
|
|
|
GB/T 24141.2-2009 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 - 英文版 |
|
|
|
GB/T 24141.1-2009 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第1部分：柴油燃料 - 英文版 |
|
|
|
GB/T 24134-2009 Rubber and plastics hoses - Assessment of ozone resistance under static conditions 橡胶和塑料软管 静态条件下耐臭氧性能的评价 - 英文版 |
|
|
|
GB/T 24126-2009 Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel 橡胶和塑料软管及软管组合件 采购者、组装者、安装者和操作者使用指南 - 英文版 |
|
|
|
GB/T 18948-2009 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 - 英文版 |
|
| Find out:67Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
