China Test method for poly GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 5169.23-2024 Fire hazard tests for electrical and electronic products - Part 23: Test flame - 500W vertical flame Test method for polymer tubular materials 电工电子产品着火危险试验-第23部分：试验火焰-聚合物管形材料500W垂直火焰试验方法 - 英文版 |
 |
|
|
|
GB/T 42870-2023 Non-destructive testing Acoustic emission testing methods and evaluation criteria for fiber-reinforced polymers 无损检测 纤维增强聚合物的声发射检测方法和评价准则 - 英文版 |
|
|
|
|
GB/T 12967.6-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第6部分：色差和外观质量 - 英文版 |
|
|
|
|
GB/T 12967.5-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分：抗破裂性的测定 - 英文版 |
|
|
|
|
GB/T 12967.4-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第4部分：耐光热性能的测定 - 英文版 |
|
|
|
|
GB/T 12967.3-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第3部分：盐雾试验 - 英文版 |
|
|
|
|
GB/T 28817-2022 Single cell test methods for polymer electrolyte fuel cell (PEFC) 聚合物电解质燃料电池单电池测试方法 - 英文版 |
|
|
|
|
GB/T 41955-2022 Non-opening compression test method for multidirectional laminates of polymer matrix composites 聚合物基复合材料多向层合板无开孔压缩试验方法 - 英文版 |
|
|
|
|
GB/T 41767-2022 Test method for moisture absorption performance and equilibrium state adjustment of polymer matrix composites 聚合物基复合材料吸湿性能及平衡状态调节试验方法 - 英文版 |
|
|
|
|
GB/T 40396-2021 Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA） 聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法（DMA） - 英文版 |
|
|
|
|
GB/T 40260-2021 Test method for determining gas permeability of polymer membrane materials 高分子膜材料气体渗透性能测试方法 - 英文版 |
|
|
|
|
GB/T 39748.9-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 - 英文版 |
|
|
|
|
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 - 英文版 |
|
|
|
|
GB/T 39748.7-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 - 英文版 |
|
|
|
|
GB/T 39748.6-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 - 英文版 |
|
|
|
|
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 - 英文版 |
|
|
|
|
GB/T 39748.10-2021 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 - 英文版 |
|
|
|
|
GB/T 7363-2021 Test method for polynuclear aromatics in petroleum wax 石油蜡中稠环芳烃试验法 - 英文版 |
|
|
|
|
GB/T 39026-2020 Test method for the identification of recycled polyethylene terephthalate (PET) fiber 循环再利用聚酯（PET）纤维鉴别方法 - 英文版 |
|
|
|
|
GB/T 12967.1-2020 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分：耐磨性的测定 - 英文版 |
|
|
|
|
GB/T 38534-2020 Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 - 英文版 |
|
|
|
|
GB/T 35465.6-2020 Test method for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension 聚合物基复合材料疲劳性能测试方法 第6部分：胶粘剂拉伸剪切疲劳 - 英文版 |
|
|
|
|
GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue 聚合物基复合材料疲劳性能测试方法 第5部分：弯曲疲劳 - 英文版 |
|
|
|
|
GB/T 35465.4-2020 Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue 聚合物基复合材料疲劳性能测试方法 第4部分：拉-压和压-压疲劳 - 英文版 |
|
|
|
|
GB/T 22079-2019 HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则 - 英文版 |
|
|
|
|
GB/T 22079-2019 HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则 - 英文版 |
|
|
|
|
GB/T 18476-2019 Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验） - 英文版 |
|
|
|
|
GB/T 36965-2018 Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 - 英文版 |
|
|
|
|
GB/T 37049-2018 Test method for the content of metal impurity in electronic grade polysilicon—Inductively coupled-plasma mass spectrometry method 电子级多晶硅中基体金属杂质含量的测定-电感耦合等离子体质谱法 - 英文版 |
|
|
|
|
GB/T 4059-2018 Test method for phosphorus content in polycrystalline silicon by zone-melting method under controlled atmosphere 硅多晶气氛区熔基磷检验方法 - 英文版 |
|
|
|
|
GB/T 36159-2018 Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications 建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择 - 英文版 |
|
|
|
|
GB/T 4060-2018 Test method for boron content in polycrystalline silicon by vacuum zone-melting method 硅多晶真空区熔基硼检验方法 - 英文版 |
|
|
|
|
GB/T 34551-2017 Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition 玻璃纤维增强复合材料筋高温耐碱性试验方法 - 英文版 |
|
|
|
|
GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material 热塑性塑料及其复合材料热封面热粘性能测定 - 英文版 |
|
|
|
|
GB/T 15670.15-2017 Toxicological test methods for pesticides registration—Part 15: In vivo mammalian bone marrow polychromatic erythrocyte micronucleus test 农药登记毒理学试验方法 第15部分：体内哺乳动物骨髓嗜多染红细胞微核试验 - 英文版 |
|
|
|
|
GB/T 33614-2017 Test method for compression properties of 3D braided fabric and its polymer matrix composites 三维编织物及其树脂基复合材料压缩性能试验方法 - 英文版 |
|
|
|
|
GB/T 33613-2017 Test method for tensile properties of 3D braided fabric and its polymer matrix composites 三维编织物及其树脂基复合材料拉伸性能试验方法 - 英文版 |
|
|
|
|
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites 三维编织物及其树脂基复合材料弯曲性能试验方法 - 英文版 |
|
|
|
|
GB/T 35465.2-2017 Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data 聚合物基复合材料疲劳性能测试方法 第2部分：线性或线性化应力寿命（S-N）和应变寿命（ε-N）疲劳数据的统计分析 - 英文版 |
|
|
|
|
GB/T 35465.3-2017 Test method for fatigue properties of polymer matrix composite materials -Part 3: Tension-tension fatigue 聚合物基复合材料疲劳性能测试方法 第3部分：拉-拉疲劳 - 英文版 |
|
|
|
|
GB/T 35465.1-2017 Test method for fatigue properties of polymer matrix composite materials—Part 1：General principle 聚合物基复合材料疲劳性能测试方法 第1部分：通则 - 英文版 |
|
|
|
|
GB/T 33312-2016 Binders for paints and varnishes—Polyisocyanate resins—General methods of test 色漆和清漆用漆基 多异氰酸酯树脂 通用试验方法 - 英文版 |
|
|
|
|
GB/T 32346.1-2015 Long AC submarine cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分：试验方法和要求 - 英文版 |
|
|
|
|
GB/T 18890.1-2015 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 1: Test methods and requirements 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件 第1部分：试验方法和要求 - 英文版 |
|
|
|
|
GB/T 31984-2015 Test method for determining the content of vinyl acetate in ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA) 光伏组件用乙烯-醋酸乙烯共聚物中醋酸乙烯酯含量测试方法 热重分析法（TGA） - 英文版 |
|
|
|
|
GB/T 6508-2015 Test method for dyeing uniformity of polyester filament yarns 涤纶长丝染色均匀度试验方法 - 英文版 |
|
|
|
|
GB/T 11017.1-2014 Power cables with cross-linked polyethylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 1: Test methods and requirements 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件 第1部分：试验方法和要求 - 英文版 |
|
|
|
|
GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials 定向纤维增强聚合物基复合材料弯曲性能试验方法 - 英文版 |
|
|
|
|
GB/T 3355-2014 Test method for in-plane shear response of polymer matrix composite materials 聚合物基复合材料纵横剪切试验方法 - 英文版 |
|
|
|
|
GB/T 3354-2014 Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials 定向纤维增强聚合物基复合材料拉伸性能试验方法 - 英文版 |
|
| Find out:92Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
