China Verification test me GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB 4789.45-2023 National Food Safety Standard General Principles for Verification of Microbiological Test Methods 食品安全国家标准 微生物检验方法验证通则 - 英文版 |
 |
|
|
GB/T 6683.3-2023 Petroleum and related products—Measurement methods and precision of results—Part 3: Monitoring and verification of published precision data for test methods 石油及相关产品 测量方法与结果精密度 第3部分：试验方法已发布精密度数据的监测和验证 - 英文版 |
|
|
|
GB/T 42784.1-2023 Rough terrain forklifts - Test methods for verification of visibility - Part 1: Telehandlers 越野叉车 验证视野的试验方法 第1部分：伸缩臂式叉车 - 英文版 |
|
|
|
GB/T 21838.2-2022 Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 2: Verification and calibration of testing machines 金属材料 硬度和材料参数的仪器化压入试验 第2部分：试验机的检验和校准 - 英文版 |
|
|
|
GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment 无损检测 超声检测 超声测厚仪性能特征和测试方法 - 英文版 |
|
|
|
GB/T 40080-2021 Nondestructive testing of steel tubes—Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness 钢管无损检测 用于确认无缝和焊接钢管（埋弧焊除外）水压密实性的自动电磁检测方法 - 英文版 |
|
|
|
GB/T 39847-2021 Verification test methods of access satellite network for FSS communication earth station 固定卫星通信业务地球站进入卫星网络的验证测试方法 - 英文版 |
|
|
|
GB/T 16857.901-2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system 产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第901部分：配置多影像探测系统的坐标测量机 - 英文版 |
|
|
|
GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments 产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度 - 英文版 |
|
|
|
GB/T 14480.3-2020 Non-destructive testing instruments—Equipment for eddy current examination—Part 3: System characteristics and verification 无损检测仪器 涡流检测设备 第3部分：系统性能和检验 - 英文版 |
|
|
|
GB/T 5599-2019 Specification for dynamic performance assessment and testing verification of rolling stock 机车车辆动力学性能评定及试验鉴定规范 - 英文版 |
|
|
|
GB/T 5599-2019 Specification for dynamic performance assessment and testing verification of rolling stock 机车车辆动力学性能评定及试验鉴定规范 - 英文版 |
|
|
|
GB/T 34874.3-2017 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests 产品几何技术规范（GPS） X射线三维尺寸测量机 第3部分：验收检测和复检检测 - 英文版 |
|
|
|
GB/T 16857.2-2017 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions 产品几何技术规范（GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量线性尺寸的坐标测量机 - 英文版 |
|
|
|
GB/T 34867.1-2017 Procedures for measurement and verification of motor-system energy-savings—Part 1: Test procedures on working site for energy efficiency of motor 电动机系统节能量测量和验证方法 第1部分：电动机现场能效测试方法 - 英文版 |
|
|
|
GB/T 34890-2017 Geometrical product specification（GPS）—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system 产品几何技术规范（GPS） 数字摄影三坐标测量系统的验收检测和复检检测 - 英文版 |
|
|
|
GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分：使用单探针或多探针接触式探测系统的坐标测量机 - 英文版 |
|
|
|
GB/Z 34603-2017 Gaseous-media fire-extinguishing systems—Engineered extinguishing systems—Flow calculation implementation method and flow verification and testing for approval 气体灭火系统 预设计 流量计算方法及验证试验 - 英文版 |
|
|
|
GB/T 34104-2017 Metallic materials—Verification of the alignment of testing machines 金属材料 试验机加载同轴度的检验 - 英文版 |
|
|
|
GB/T 33888-2017 Non-destructive testing instruments—Characterization and verification of ultrasonic thickness measuring equipment 无损检测仪器 超声测厚仪特性与验证 - 英文版 |
|
|
|
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports 化学分析方法验证确认和内部质量控制实施指南 报告定性结果的方法 - 英文版 |
|
|
|
GB/T 4341.2-2016 Metallic materials—Shore hardness test—Part 2: Verification of hardness testers 金属材料 肖氏硬度试验 第2部分：硬度计的检验 - 英文版 |
|
|
|
GB/T 32660.2-2016 Metallic materials—Webster hardness test—Part 2: Verification and calibration of hardness testers 金属材料 韦氏硬度试验 第2部分：硬度计的检验与校准 - 英文版 |
|
|
|
GB/T 32272.1-2015 Powered industrial trucks—Test methods for verification of visibility—Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10t capacity 机动工业车辆 验证视野的试验方法 第1部分：起重量不大于10t的坐驾式、站驾式车辆和伸缩臂式叉车 - 英文版 |
|
|
|
GB/T 14480.2-2015 Non-destructive testing instruments—Equipment for eddy current examination—Part 2：Probe characteristics and verification 无损检测仪器 涡流检测设备 第2部分：探头性能和检验 - 英文版 |
|
|
|
GB/T 14480.1-2015 Non-destructive testing instruments—Equipment for eddy current examination—Part 1：Instrument characteristics and verification 无损检测仪器 涡流检测设备 第1部分：仪器性能和检验 - 英文版 |
|
|
|
GB/T 18256-2015 Non-destructive testing of steel tubes—Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness 钢管无损检测 用于确认无缝和焊接钢管（埋弧焊除外）水压密实性的自动超声检测方法 - 英文版 |
|
|
|
GB/T 8117.3-2014 Rules for steam turbine thermal acceptance test―Part 3: Method C―Thermal performance verification tests of retrofitted steam turbines 汽轮机热力性能验收试验规程 第3部分：方法Ｃ 改造汽轮机的热力性能验证试验 - 英文版 |
|
|
|
GB/T 4340.2-2012 Metallic materials - Vickers hardness test - Part 2：Verification and calibration of testing machines 金属材料 维氏硬度试验 第2部分：硬度计的检验与校准 - 英文版 |
|
|
|
GB/T 29302-2012 Non-destructive testing instruments - Characterization and verification of phased array ultrasonic examination systems 无损检测仪器 相控阵超声检测系统的性能与检验 - 英文版 |
|
|
|
GB/T 231.2-2012 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines 金属材料 布氏硬度试验 第2部分：硬度计的检验与校准 - 英文版 |
|
|
|
GB/T 230.2-2012 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines(scales A,B,C,D,E,F,G,H,K,N,T) 金属材料 洛氏硬度试验 第2部分：硬度计（A、B、C、D、E、F、G、H、K、N、T标尺）的检验与校准 - 英文版 |
|
|
|
GB/T 18449.2-2012 Metallic materials - Knoop hardness test - Part 2：Verification and calibration of testing machines 金属材料 努氏硬度试验 第2部分：硬度计的检验与校准 - 英文版 |
|
|
|
GB/T 17394.2-2012 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of hardness testers 金属材料 里氏硬度试验 第2部分：硬度计的检验与校准 - 英文版 |
|
|
|
GB/T 14999.3-2012 Test methods for superalloys - Part 3: Verification of longitudinal fracture of bars 高温合金试验方法 第3部分：棒材纵向断口检验 - 英文版 |
|
|
|
GB/T 14999.2-2012 Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch 高温合金试验方法 第2部分：横向低倍组织及缺陷酸浸检验 - 英文版 |
|
|
|
GB/T 14999.1-2012 Test method for superalloys - Part 1: Verification of longitudinal macro-structures and defect by etch 高温合金试验方法 第1部分：纵向低倍组织及缺陷酸浸检验 - 英文版 |
|
|
|
GB/T 27664.3-2012 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment 无损检测 超声检测设备的性能与检验 第3部分：组合设备 - 英文版 |
|
|
|
GB/T 27664.2-2011 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2：Probes 无损检测 超声检测设备的性能与检验 第2部分：探头 - 英文版 |
|
|
|
GB/T 27664.1-2011 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1：Instruments 无损检测 超声检测设备的性能与检验 第1部分：仪器 - 英文版 |
|
|
|
GB/T 24762-2009 Geometrical product specifications (GPS) - Acceptance test and reverification test for video measuring machine 产品几何技术规范（GPS） 影像测量仪的验收检测和复检检测 - 英文版 |
|
|
|
GB/T 16857.3-2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis 产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第3部分：配置转台的轴线为第四轴的坐标测量机 - 英文版 |
|
|
|
GB/T 14480.3-2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification 无损检测 涡流检测设备 第3部分: 系统性能和检验 - 英文版 |
|
|
|
GB/T 21838.2-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines 金属材料 硬度和材料参数的仪器化压痕试验 第2部分: 试验机的检验和校准 - 英文版 |
|
|
|
GB/T 16825.1-2008 Verification of static uniaxial testing machines - Part 1：Tension/compression testing machines - Verification and calibration of the force-measuring system 静力单轴试验机的检验 第1部分: 拉力和(或)压力试验机测力系统的检验与校准 - 英文版 |
|
|
|
GB/T 13634-2008 Calibration of force-proving instruments used for the verification of uniaxlial testing machines 单轴试验机检验用标准测力仪的校准 - 英文版 |
|
|
|
GB/T 16857.6-2006 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定 - 英文版 |
|
|
|
GB/T 16857.2-2006 Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM) - Part 2: CMMs used for measuring size 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量尺寸的坐标测量机 - 英文版 |
|
|
|
GB/T 16857.5-2004 Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机 - 英文版 |
|
|
|
GB/T 16857.4-2003 Geometrical Product Specifications(GPS)--Acceptance andreverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第4部分: 在扫描模式下使用的坐标测量机 - 英文版 |
|
| Find out:61Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-2583-1330
