Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
Year of issued: |2017 |2016 |2015 |2014 |2013 |2012 |2011 |2010 |2009 |2008 |2007 |2006 |2005 |2004 |2003 |2002 |2001 |2000 |1999 |1998 |1997 |1996 |1995 |1994 |1993 |1992 |1991 |1990 |1989 |1988 |1987 |1986 |1985 |1984 |1983 |1982 |1981 |1980 |1979 |1978 |1977 |1976 |1965 |1964 |1963
 

2005 year China issued GB standards list

       
GB/T 16896.1-2005
Instruments and software used for measurements in high-voltage impulse tests Part 1:requirements for instruments
高电压冲击测量仪器和软件 第一部分:对仪器的要求
GB/T 5170.17-2005
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments
电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备
GB/T 307.2-2005
Rolling bearings-Measuring and gauging principles and methods
滚动轴承 测量和检验的原则及方法
GB/T 19932-2005
Earth-moving machinery-Hydraulic excavators-Laboratory tests and performance requirements for operator protective guards
土方机械 液压挖掘机 司机防护装置的试验室试验和性能要求
GB/T 307.3-2005
Rolling bearings-General technical regulations
滚动轴承 通用技术规则
GB/T 17213.14-2005
Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves
工业过程控制阀 第8-2部分:噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声
GB/T 1596-2005
Fly ash used for cement and concrete
用于水泥和混凝土中的粉煤灰
GB/T 5350-2005
Fiber-reinforced thermosetting plastic composites pipe-Determination for longitudinal compressive properties
纤维增强热固性塑料管轴向压缩性能 试验方法
GB/T 19989-2005
Equipment for working the soil-Hoe blades-Fixing dimensions
土壤耕作机械 锄铲 安装尺寸
GB/T 19972-2005
Sterilization of health care products -- Biological indicators --Guidance for the selection, use and interpretation of results
医疗保健产品灭菌 生物指示物 选择、使用及检验结果判断指南
GB 2715-2005
Hygienic standard for grains
粮食卫生标准
GB/T 7779-2005
The model designation of centrifuges
离心机 型号编制方法
GB/T 10561-2005
Steel-Determination of content of nonmetallic inclusions-Micrographic method using standards diagrams
钢中非金属夹杂物含量的测定--标准评级图显微检验法
GB/T 19629-2005
Medical Electrical Equipment-Dosimeters with ionization chambers and/or semi-conductors as used in X-ray diagnostic imaging
医用电气设备 X射线诊断影像中使用的电离室和(或)半导体探测器剂量计
GB 7000.7-2005
Safety requirements for floodlights
投光灯具安全要求
GB/T 20008-2005
Information security technology -- Operating systems security evaluation criteria
信息安全技术 操作系统安全评估准则
GB/T 19834-2005
Oceanographic terminology-Science of marine resources
海洋学术语 海洋资源学
GB/T 3362-2005
Test methods for tensile properties of carbon fiber multifilament
碳纤维复丝拉伸性能试验方法
GB/T 15789-2005
Geotextiles and geotextiles-related products-Determination of water permeability characteristics normal to the plane,without load
土工布及其有关产品 无负荷时垂直渗透特性的测定
GB 8369-2005
Transfusion sets for single use
一次性使用输血器
GB/T 19840-2005
Rotary positive displacement pumps-Technical requirements
回转容积泵 技术要求
GB/T 307.1-2005
Rolling bearings-Radial bearings-Tolerances
滚动轴承 向心轴承 公差
GB/T 17213.16-2005
Industrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow
工业过程控制阀 第8-4部分:噪声的考虑 液动流流经控制阀产生的噪声预测方法
GB 9706.23-2005
Medical electrical equipment-Part 2-43:Particular requirements for the safety of X-ray equipment for interventional procedures
医用电气设备 第2-43部分:介入操作 X射线设备安全专用要求
GB/T 2015-2005
White Portland Cement
白色硅酸盐水泥
GB/T 12217-2005
Machines-Shaft heights
机器 轴高
GB/T 20019-2005
Thermal spraying -- Acceptance inspection of thermal spraying equipment
热喷涂 热喷涂设备的验收检查
GB/T 2353-2005
Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and motors
液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号
GB 8851-2005
Food additive Propyl p-hydroxybenzoate
食品添加剂 对羟基苯甲酸丙酯
GB/T 3792.6-2005
Bibliographical description for cartographic materials
测绘制图资料著录规则
GB/T 19796-2005
Agricultural irrigation equipment-Plastics saddles for polyethylene pressure pipes
农业灌溉设备 聚乙烯承压管用塑料鞍座
GB/T 19730-2005
Micrographics-Microfilming of serials-Operating procedures
缩微摄影技术 期刊的缩微拍摄 操作程序
GB/T 5170.15-2005
Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test
电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台
GB 15208.1-2005
Micro-dose X-ray security inspection system-Part 1:General technical requirements
微剂量X射线安全检查设备 第1部分:通用技术要求
GB/T 6044-2005
Analogue quartz watches
指针式石英手表
GB/T 5321-2005
Measurement of loss and efficiency for electrical machine by the calorimetric method
量热法测定电机的损耗和效率
GB 18240.5-2005
Fiscal cash register-Part 5:Specification of fiscal printer
税控收款机 第5部分:税控打印机规范
GB/T 19925-2005
Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port
液压传动 隔离式充气蓄能器 优先选择的液压油口
GB 15961-2005
Food additive Monascus color
食品添加剂 红曲红
GB/T 19860-2005
Determination for hydrogen form of weak acid cation exchange resins
弱酸性阳离子交换树脂氢型率测定方法
GB/T 514-2005
Specification for liquid-in-glass thermometers for testing of petroleum products
石油产品试验用玻璃液体温度计技术条件
GB 16487.1-2005
Environmental protection control standard for imported solid wastes as raw materials -- Wastes of bones
进口可用作原料的固体废物环境保护控制标准 骨废料
GB/T 19928-2005
Earth-moving machinery-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom
土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量
GB/T 19866-2005
Specification and qualification of welding procedures for metallic materials-General rules
焊接工艺规程及评定的一般原则
GB/T 19851.12-2005
Sports equipment and playground for middle school primary school Part 12:Checkout-equipment for physique-health of students
中小学体育器材和场地 第12部分:学生体质健康测试器材
GB/T 8381.2-2005
Determination of Shigella in feeds
饲料中志贺氏菌的检测方法
GB/T 5530-2005
Animal and vegetable fats and oils-Determination of acid value and acidity
动植物油脂 酸值和酸度测定
GB/T 14233.2-2005
Infusion,transfusion,injection equipment for medical use -- Part 2: Biological test methods
医用输液、输血、注射器具检验方法 第2部分:生物学试验方法
GB 19724-2005
Forestry machinery-Portable chain-saws and brush cutters-Exhaust system-caused fire risk
林业机械 便携式油锯和割灌机 易引起火险的排放系统
GB/T 1345-2005
The test sieving method for fineness of cement
水泥细度检验方法 筛析法
GB/T 19909-2005
Product of geographical indication-Castanea henryi(skan)Rehd.et wils Jianou
地理标志产品 建瓯锥栗
GB/T 19875-2005
Mechanical vibration and shock-Vibration of stationary structures-Specific requirements for quality management in measurement and evaluation of vibration
机械振动与冲击 固定结构的振动 在振动测量和评价方面质量管理的具体要求
GB/T 19732-2005
Micrographics-Readers for transparent microforms-Performance characteristics
缩微摄影技术 透明缩微品阅读器 性能特征
GB/T 19940-2005
Chrome powder-Determination of chromium(VI)
粉状铬鞣剂 六价铬离子测定方法
GB/T 15788-2005
Geotextiles and geotextile-related products-Wide width tensile test
土工布及其有关产品 宽条拉伸试验方法
GB 10963.1-2005
Electrical accessories-Circuit-breakers for overcurrent protection for household and similar installation Part 1:Circuit-breakers for a.c.operation
电气附件-家用及类似场所用过电流保护断路器 第1部分:用于交流的断路器
GB/T 19851.5-2005
Sports equipment and playground for middle school primary school Part 5:Volleyball
中小学体育器材和场地 第5部分:排球
GB/T 19949.2-2005
Road vehicle Airbag components Part2:Testing of airbag modules
道路车辆 安全气囊部件 第2部分:安全气囊模块试验
GB/T 15162-2005
Technical regulation for afforestation by aerial seeding
飞播造林技术规程
GB/T 5334-2005
Performance requirments and test methods of passenger car wheels
乘用车车轮性能要求和试验方法
GB/T 19682-2005
Target text quality requirements for translation services
翻译服务译文质量要求
GB/T 9217.1-2005
Hardmetal burrs--Part 1:General specifications
硬质合金旋转锉 第1部分:通用技术条件
GB/T 18386-2005
Electric vehicles Energy consumption and range Test procedures
电动汽车 能量消耗率和续驶里程 试验方法
GB/T 5141-2005
Counterbalanced fork-lift trucks-Stability test
平衡重式叉车 稳定性试验
GB/T 19751-2005
Hybrid electric vehicles safety specification
混合动力电动汽车安全要求
GB/T 19936.1-2005
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils
齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90
GB/T 19664-2005
Production Technique Criterion for Commercial Broiler
商品肉鸡生产技术规程
GB/T 1455-2005
Test method for shear properties of sandwich constructions or cores
夹层结构或芯子剪切性能试验方法
GB 2733-2005
Hygienic standard for fresh and frozen marine products of animal origin
鲜、冻动物性水产品卫生标准
GB/T 19884-2005
Acoustics-In-situ determination of insertion loss of outdoor noise barriers of all types
声学 各种户外声屏障插入损失的现场测定
GB/T 19888.1-2005
Acoustics-Stationary audible warning devices used outdoors-Part 1:Field measurements for determination of sound emission quantities
声学 户外用固定式听觉报警器 第1部分:声发射量的现场测定
GB/T 13748.2-2005
Chemical analysis methods of magnesium and magnesium alloys Determination of tin content Pyrocatechol violet spectrophotometric method
镁及镁合金化学分析方法 锡含量的测定 邻苯二酚紫分光光度法
GB/T 19879-2005
Steel Plates For Building Structure
建筑结构用钢板
GB/T 20009-2005
Information security technology -- Data base management systems security evaluation criteria
信息安全技术 数据库管理系统安全评估准则
GB/T 13748.6-2005
Chemical analysis methods of magnesium and magnesium alloys Determination of silver content Flame atomic absorption spectrophotometric method
镁及镁合金化学分析方法 银含量的测定 火焰原子吸收光谱法
GB/T 19897.3-2005
Automatic Meter Reading System Lower Layer Communication Protocol Part 3:Physical layer services and procedures for connection oriented asynchronous data exchange
自动抄表系统低层通信协议 第3部分:面向连接的异步数据交换的物理层服务进程
GB/T 19897.2-2005
Automatic Meter Reading System Lower Layer Communication Protocol Part 2:Use of area networks on twisted pair with carrier signalling
自动抄表系统低层通信协议 第2部分:基于双绞线载波信号的局域网使用
GB/T 14614.4-2005
Determination of rheological properties of dough using alveograph
小麦粉面团流变特性测定 吹泡仪法
GB/T 19895.1-2005
Projection in indoor rooms-Screen illumination test for still projectors
室内放映 幻灯、投影放映设备 银幕照度的测定方法
GB/T 19889.2-2005
Acoustics-Measurement of sound insulation in buildings and of building elements-Part2:Determination,verification and application of precision data
声学 建筑和建筑构件隔声测量 第2部分:数据精密度的确定、验证和应用
GB/T 19994-2005
General Technical Requirements for road bicycles
自行车通用技术条件
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
机械振动与冲击 加速度计的机械安装
GB/T 19836-2005
Instrumentation for electric vehicles
电动汽车用仪表
GB/T 19889.4-2005
Acoustics-Measurement of sound insulation in buildings and of building elements-Part4:Field measurements of airborne sound insulation between rooms
声学 建筑和建筑构件隔声测量 第4部分:房间之间空气声隔声的现场测量
GB/T 15970.8-2005
Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments
金属和合金的腐蚀 应力腐蚀试验 第8部分:焊接试样的制备和应用
GB/T 19979.1-2005
Geosynthetics-Penetration resist Property-Part1:Determination of Static Hydraulic Pressure
土木合成材料 防渗性能 第1部分: 耐静水压的测定
GB/T 12230-2005
General purpose industrial valves-Specification of stainless steel castings
通用阀门 不锈钢铸件技术条件
GB/T 19851.10-2005
Sports equipment and playground for middle school primary school Part 10:Tennis Racket
中小学体育器材和场地 第10部分:网球拍
GB/T 12221-2005
Metal valves-Face to face,end to end,center to face and center to end dimensions
金属阀门 结构长度
GB/T 15305.1-2005
Coated abrasives-Plain sheets
涂附磨具 砂页
GB/T 19847-2005
Mechanical vibration and shock-Analytical methods of assessing shock resistance of mechanical systems-Information exchange between suppliers and users of analyses
机械振动和冲击 评价机械系统冲击阻抗的分析方法 分析的提供者和使用者之间的信息交换
GB/T 12146-2005
Analysis of water used in boil and cooling system Determination of ammonia-Phenol method
锅炉用水和冷却水分析方法 氨的测定 苯酚法
GB/T 15822.2-2005
Non-desstructive testing-Magnetic particle testing-Part 2:Detection media
无损检测 磁粉检测 第2部分:检测介质
GB/T 12130-2005
Mediccal hyperbaric chamber pressurized with air
医用空气加压氧舱
GB/T 19935-2005
Worm gears-Geometry of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser
蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数
GB/T 11982.1-2005
Polyvinyl chloride floor sheets Part 1:Polyvinyl chloride floor sheets with backing
聚氯乙烯卷材地板 第1部分:带基材的聚氯乙烯卷材地板
GB/T 19845-2005
Mechanical vibration-Vibration testing requirements for shipboard equipment and machinery components
机械振动 船舶设备和机械部件的振动 试验要求
GB/T 13150-2005
Semiconductor devices Discret devices Blank detail specification for bidirectional triode thyristors(triacs),ambient and case-rated,for currents greater than 100A
半导体器件 分立器件 电流大于 100A、环境和管壳额定的双向三极晶闸管空白详细规范
GB/T 14909-2005
Technical guides for exergy analysis in energy system
能量系统用分析技术导则
GB/T 19838-2005
Hazard Analysis and Critical Control Point(HACCP) system and guidelines for Its application to fish fishery products
水产品危害分析与关键控制点(HACCP)体系及其应用指南
GB/T 19924-2005
Mobile cranes-Determination of stability
流动式起重机 稳定性的确定
GB/T 19843-2005
Industrial fan-performance testing of jet fans
工业通风机 射流风机的性能试验
GB/T 19921-2005
Test method of particles on silicon wafer surfaces
硅抛光片表面颗粒测试方法
GB/T 12957-2005
Test method for activity of industrial waste slag used as addition to cement
用于水泥混合材的工业废渣活性试验方法
GB/T 19982-2005
Woodworking machines-Diameters of spindles for receiving circular sawblades
木工机床 安装圆锯片处的主轴直径
GB/T 19985-2005
Woodworking machines-Routing machines-Nomenclature
木工机床 镂铣机 术语和精度
GB/T 13151-2005
Semiconductor devices Discrete devices Part 6:Thyristors Section Three-Blank detail specification for reverse blocking triode thyristors,ambient and case-rated,for currents greater than 100A
半导体器件 分立器件 第6部分:晶闸管 第3篇 电流大于 100A、环境和管壳额定的反向阻断三极晶闸管空白详细规范
GB/T 19987-2005
Agricultural machinery-Equipment for working the soil S-tines:Test method
农业机械 土壤工作部件 S型弹齿 试验方法
GB/T 15933-2005
Common Chinese abbrieviations used in dictionaries
辞书编纂常用汉语缩略语
GB/T 13401-2005
Steel plate butt-welding pipe fittings
钢板制对焊管件
GB/T 19868.4-2005
Welding procedure qualification based on pre-production welding test
基于预生产焊接试验的工艺评定
GB/T 13748.13-2005
Chemical analysis methods of magnesium and magnesium alloys Determination of lead content Flame atomic absorption spectrophotometric method
镁及镁合金化学分析方法 铅含量的测定 火焰原子吸收光谱法
GB/T 19931-2005
Earth-moving machinery-Trenchers-Definitions and commercial specifications
土方机械 挖沟机 术语和商业规范
GB/T 10952-2005
Hobs for parallel side splines
矩形花键滚刀
GB/T 7559-2005
Test method for bearing strength by bolted joints of fiber reinforced plastics laminates
纤维增强塑料层合板 螺栓连接挤压强度试验方法
GB 17691-2005
Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V)
车用压燃式、气体燃料点燃式发动机与汽车排气污染物排放限值及测量方法(中国III、IV、V阶段)
GB/T 19709-2005
Electronic data interchange for administration,commerce and transport-Rules for generation of XML schema(XSD)on the basis of EDI(FACT)message implementation guidelines
用于行政、商业和运输业电子数据交换基于EDI(FACT)报文实施指南的XML schema(XSD)生成规则
GB/T 19655-2005
Auxiliaries for lamps--Starting devices(other than glow starters)Performance requirements
灯用附件 启动装置(辉光启动器除外)性能要求
GB/T 19774-2005
Specification of water electrolyte system for producing hydrogen
水电解制氢系统技术要求
GB/T 17626.14-2005
Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
电磁兼容 试验和测量技术 电压波动抗扰度试验
GB/T 3903.9-2005
Footwear-Test methods for insoles-Heel pin holding strengh
鞋类-内底试验方法-跟部持钉力
GB/T 3798.1-2005
Technical requirements for completion and acceptance of vehicle overhaul Part 1:Passenger vehicle
汽车大修竣工出厂技术条件 第1部分:载客汽车
GB/T 7935-2005
Hydraulic fluid power-General requirements for hydraulic components
液压元件 通用技术条件
GB/T 19785-2005
Stretch packaging
拉伸缠绕包装
GB/T 17249.2-2005
Acoustics-Guidelines for the design of low-noise workplaces-Part 2:Noise control measures
声学 低噪声工作场所设计指南 第2部分:噪声控制措施
GB/T 17213.9-2005
Industrial-process control valves Part 2-3:Flow capacity-Test procedures
工业过程控制阀 第2-3部分:流通能力 试验程序
GB/T 3856-2005
Test method for compression properties of unidirectional fiber reinforced plastics
单向纤维增强塑料平板压缩性能试验方法
GB/T 18364.2-2005
Filling receptacle of LPG vehicle-Part 2:Insert
汽车用液化石油气加气口 第2部分:快插式
GB 5226.4-2005
Safety of machinery-Electrical equipment of machines-Part 31:Particular safety and EMC requirements for sewing machines,units and systems
机械安全 机械电气设备 第31部分:缝纫机、缝制单元和缝制系统的特殊安全和EMC要求
GB/T 3799.1-2005
Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 1:Gasoline engines
商用汽车发动机大修竣工出厂技术条件 第1部分:汽油发动机
GB/T 8151.16-2005
Methods for chemical analysis of zinc concentrates-Determination of cobalt content-Flame atomic absorption spectrometer method
锌精矿化学分析方法 钴量的测定 火焰原子吸收光谱法
GB/T 3903.8-2005
Footwear-Test methods for insoles-Delamination resistance
鞋类-内底试验方法-层间剥离强度
GB 19510.7-2005
Lamp controlgear--Part 7:Particular requirements for d.c.supplied electronic ballasts for aircraft lighting
灯的控制装置 第7部分:航空器照明用直流电子镇流器的特殊要求
GB 19758-2005
Limits and measurement methods for exhaust smoke emissions from motorcycles and mopeds
摩托车和轻便摩托车排气烟度排放限值及测量方法
GB/T 1883.1-2005
Reciprocating internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation
往复式内燃机 词汇 第1部分:发动机设计和运行术语
GB/T 6148-2005
Test method for temperature-resistance coefficient of precision resistance alloys
精密电阻合金电阻温度系数测试方法
GB/T 5796.3-2005
Trapezoidal screw threads-Part 3:Basic dimensions
梯形螺纹 第3部分:基本尺寸
GB/T 19722-2005
Scoured sheep wool
洗净绵羊毛
GB/T 18851.4-2005
Non-destructive testing-Penetrant testing-Part 4:Equipment
无损检测 渗透检测 第4部分:设备
GB/T 5585.1-2005
Copper or aluminium and its alloy bus bars for electrical purposes Part 1:Copper and copper alloy bus bars
电工用铜、铝及其合金母线 第1部分:铜和铜合金母线
GB/T 18932.28-2005
Method for the determination of tetracyclins antibiotics residues in honey--Enzyme-linked Immunosorbent Assay method
蜂蜜中四环素族抗生素残留量测定方法 酶联免疫法
GB/T 5351-2005
Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure
纤维增强热固性塑料管短时水压 失效压力试验方法
GB 19212.24-2005
Safety of power transformers, power supply units and similar devices -- Part 24: Particular requirements for transformers for construction sites
电力变压器、电源装置和类似产品的安全 第24部分:建筑工地用变压器的特殊要求
GB/T 5270-2005
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion
金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述
GB/T 5183-2005
Fork lift trucks-Fork arms-Dimensions
叉车 货叉 尺寸
GB/T 5170.18-2005
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments
电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备
GB/T 18932.26-2005
Method for the determination of metronidazole,ronidazole and dimetridazole residues in honey-Liquid chromatographic method
蜂蜜中甲硝哒唑、洛硝哒唑、二甲硝咪唑残留量的测定方法 液相色谱法
GB/T 19749-2005
Coupling capacitors and capacitor dividers
耦合电容器及电容分压器
GB/T 5094.3-2005
Industrial systems,installations and equipment and industrial products-Structuring principles and reference designations-Part 3:Application guidelines
工业系统、装置与设备以及工业产品 结构原则与参照代号 第3部分:应用指南
GB 19877.3-2005
Special Toilet Soaps
特种香皂
GB/T 3854-2005
Test method for hardness of reinforced plastics by means of a Barcol impresser
增强塑料巴柯尔硬度试验方法
GB/T 19735-2005
Micrographics-Rotary camera for 16 mm microfilm-Mechanical and optical characteristics
缩微摄影技术 16mm缩微胶片轮转式摄影机 机械与光学特性
GB/T 19817-2005
Textiles-Fabrics for furnishings
纺织品 装饰用织物
GB/T 2423.33-2005
Environmental testing for electric and electronic products Part 2:Test Method Test Kca:High concentration sulfur dioxide
电工电子产品环境试验 第2部分:试验方法 试验Kca:高浓度二氧化硫试验
GB/T 17213.6-2005
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators
工业过程控制阀 第6-1部分:定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装
GB/T 17213.10-2005
Industrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability
工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比
GB 16776-2005
Structural silicon sealants for building
建筑用硅酮结构密封胶
GB/T 10047.1-2005
Camera Part 1:civil miniature camera
照相机 第1部分:民用小型照相机
GB/T 20038-2005
Textile machinery -- Dyeing and finishing machines -- Definitions and range of nominal widths
纺织机械 染整机器 公称宽度的定义和系列
GB/T 9218-2005
Reels for 35mm motion picture projectors-Dimensions
35mm电影放映片夹 尺寸
GB/T 2423.35-2005
Environmental testing for electric and electronic products Part 2:Tests Tests Z/Afc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
电工电子产品环境试验 第2部分:试验方法 试验Z/AFc:散热和非散热试验样品的低温/振动(正弦)综合试验
GB/T 20034-2005
Textile machinery and accessories -- Warp creels -- Main dimensions
纺织机械与附件 经纱筒子架 主要尺寸
GB/T 19810-2005
Polyethylene(PE)pipe and fittings-Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
聚乙烯(PE)管材和管件 热熔对接接头 拉伸强度和破坏形式的测定
GB/T 19820-2005
Hydraulic cotton bale press
液压棉花打包机
GB/T 19823-2005
Thermal spraying procedures for the application of thermally sprayed coating for engineering components
热喷涂 工程零件热喷涂涂层的应用步骤
GB/T 9937.4-2005
Dental vocabulary-Part 4:Dental equipment
牙科术语 第四部分:牙科设备
GB/Z 14429-2005
Telecontrol equipmet and systems Part1:General considerations Section3:Glossary
远动设备及系统 第1-3部分:总则 术语
GB/Z 19848-2005
Hydraulic fluid power-Component cleanliness-Guidelines for achieving and controlling cleanliness of components from manufacture to installation
液压元件从制造到安装达到和控制清洁度的指南
GB/T 10913-2005
Earth-woving machinery-Determination of ground speed
土方机械 行驶速度测定
GB/T 19766-2005
Specification for natural marble for building slab
天然大理石建筑板材
GB/T 10335.1-2005
Coated paper and board-Coated art paper
涂布纸和纸板 涂布美术印刷纸(铜版纸)
GB/T 2879-2005
Hydraulic fluid power-Cylinders-Housings for piston and rod seals in reciprocating applications-Dimensions and tolerances
液压缸活塞和活塞杆动密封 沟槽尺寸和公差
GB 6952-2005
Sanitary wares
卫生陶瓷
GB/T 2424.19-2005
Environmental tests for electric and electronic products-Guidance on the application of the environmental test to simulate the effects of storage
电工电子产品环境试验 模拟贮存影响的环境试验导则
GB/T 3273-2005
Hot-rolled steel plates(sheets)and strips for automobile frames
汽车大梁用热轧钢板和钢带
GB/T 311.6-2005
Voltage measurement by means of standard air gaps
高电压测量标准空气间隙
GB/T 3402.1-2005
Plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations
塑料 氯乙烯均聚和共聚树脂 第1部分:命名体系和规范基础
GB/T 2940-2005
Technical specifications of springs for fuel pump,governor and injecter of diesel engines
柴油机用喷油泵、调速器、喷油器弹簧技术条件
GB 7655.1-2005
Food additive Brilliant blue
食品添加剂 亮蓝
GB 16155-2005
Test method for heating performance of civil water heating coal stove
民用水暖煤炉热性能试验方法
GB/T 3452.3-2005
Housing dimensions for O-ring elastomer seals in hydraulic and pneumatic applications
液压气动用O形橡胶密封圈 沟槽尺寸
GB 16487.8-2005
Environmental protection control standard for imported solid wastes as raw materials -- Waste electric motors
进口可用作原料的固体废物环境保护控制标准 废电机
GB/T 8810-2005
Determination of water absorption of rigid cellular plastics
硬质泡沫塑料吸水率的测定
GB 15558.2-2005
Buried Polyethylene(PE)piping systems for the supply of gaseous fuels Part 2:Fittings
燃气用埋地聚乙烯(PE)管道系统 第2部分:管件
GB/T 19704-2005
Display and record for hydrological instrument
水文仪器显示与记录
GB/T 14699.1-2005
Animal Feeding Stuffs---Sampling
饲料 采样
GB/T 19667.2-2005
Specification for the structure of electronic official document based on XML--Part 2:Document body
基于XML的电子公文格式规范 第2部分:公文体
GB/T 19686-2005
Rock wool,slag wool thermal insulating products for building
建筑用岩棉、矿渣棉绝热制品
GB/T 19661.1-2005
Safety requirements for nuclear instrumentations and systems Part 1:General requirements
核仪器及系统安全要求 第1部分:通用要求
GB/T 19723-2005
Determination Commercial mass of Textiles-Fibres Consignments
纺织纤维货批商业质量的测定
GB/T 19706-2005
Football Shoes
足球鞋
GB/T 19870-2005
Industrial inspecting thermal imagers
工业检测型红外热像仪
GB/T 19688.1-2005
Information and Documentation--Bibliographic Data Element Directory Part 1:Interloan Applications
信息与文献 书目数据元目录 第一部分:互借应用
GB/T 19869.1-2005
Welding procedure qualification test for steels,nickel and nickel alloys
钢、镍及镍合金的焊接工艺评定试验
GB/T 19688.3-2005
Information and Documentation--Bibliographic data element directory--Part 3:Information retrieval applications
信息与文献 书目数据元目录 第三部分:情报检索
GB/T 18932.27-2005
Method for the determination of tylosin residue in honey--Enzyme-linked Immunosorbent Assay method
蜂蜜中泰乐菌素残留量测定方法 酶联免疫法
GB/T 19707-2005
Ice-Skating Shoes
冰刀鞋
GB/T 19662-2005
Industrial automation systems-Manufacturing Message Specification Terminology
工业自动化系统 制造报文规范 术语
GB/T 19878-2005
General specifications for capacitance type & resistance type grain moisture tester
电容法和电阻法粮食水分测定仪 通用技术条件
GB/T 19627-2005
Particle size analysis-Photon correlation spectroscopy
粒度分析--光子相关光谱法

Find out:1106Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5 6

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved