Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
Year of issued: |2017 |2016 |2015 |2014 |2013 |2012 |2011 |2010 |2009 |2008 |2007 |2006 |2005 |2004 |2003 |2002 |2001 |2000 |1999 |1998 |1997 |1996 |1995 |1994 |1993 |1992 |1991 |1990 |1989 |1988 |1987 |1986 |1985 |1984 |1983 |1982 |1981 |1980 |1979 |1978 |1977 |1976 |1965 |1964 |1963
 

GB Standards english file list

     
GB 4793.3-2008
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Particular requirements for laboratory equipment for mixing and stirring
测量、控制和实验室用电气设备的安全要求 第3部分:实验室用混合和搅拌设备的特殊要求
GB/T 1156-2011
Sleeve type drip-feed lubricating cups
旋套式注油油杯
GB/T 2423.27-2005
Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test
电工电子产品环境试验 第2部分:试验方法 试验Z/AMD:低温/低气压/湿热连续综合试验
GB 50180-1993
Code of urban residential areas planning & design
城市居住区规划设计规范(2016年版)
GB/T 10751-1989
Marine oval-shaped steel pipe flanges, weld-on
船用扁圆形焊接钢法兰
GB/T 3742-2008
24° cone connectors - Male tee
卡套式锥螺纹三通管接头
GB/T 6769-2000
Regulations governing the layout of driver’s cabs of locomotives
机车司机室布置规则
GB/T 32557.2-2016
Polygonal taper interface with flange contact surface—Part 2: Dimensions and designation of receivers
带有法兰接触面的多棱锥接口 第2部分:安装孔尺寸和标记
GB/T 30102-2013
Plastics―Guidelines for the recovery and recycling of plastics waste
塑料 塑料废弃物的回收和再循环指南
GB/T 2499-1993
Marine cast iron flange dual-row stop valves-case
船用法兰铸铁双排截止阀箱
GB/T 14634.5-2010
Test methods of rare earth three-band phosphors for fluorescent lamps - Part 5: Determination of density
灯用稀土三基色荧光粉试验方法 第5部分:密度的测定
GB 5172-1985
The rule for radiation protection of particle accelerators
粒子加速器辐射防护规定
GB/T 16840.1-2008
Technical determination method for electrical fire evidence - Part 1: Macroscopic method
电气火灾痕迹物证技术鉴定方法 第1部分:宏观法
GB/T 28552-2012
Determination of acid number in transformer oils and turbine oils by BTB method
变压器油、汽轮机油酸值测定法(BTB法)
GB/T 20607-2006
Intelligent transport systems - Architecture - Services
智能运输系统 体系结构 服务
GB/T 23537-2009
Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride and mounted points
超硬磨料制品 金刚石或立方氮化硼砂轮和磨头 极限偏差和圆跳动公差
GB/T 14700-2002
Determination of vitamin B1 in feeds
饲料中维生素B1的测定
GB/T 14768-2015
Test method at 45°and assessment of carpets burning behaviour
地毯燃烧性能45°试验方法及评定
GB 15994-1995
Diagnostic criteria and principles of management of influenza for its control
流行性感冒诊断标准及处理原则
GB/T 26514-2011
Oil of Melaleuca, alternifolia,terpinen-4-ol type(Tea Tree oil)
互叶白千层(精)油,松油烯-4-醇型[茶树(精)油]
GB/T 50920-2013
Code for design of culm-producing bamboo plantation engineering
用材竹林工程设计规范
GB/T 22137.2-2008
Valve positiongers for use in industrial-process control system - Part 2: Methods of evaluating the performance of intelligent value positiongers with pneumatic outputs
工业过程控制系统用阀门定位器 第2部分:气动输出智能阀门定位器性能评定方法
GB/T 5169.17-2008
Fire hazard testing for electric and electronic products - Part 17: Test flames - 500W flame test methods
电工电子产品着火危险试验 第17部分: 试验火焰 500W 火焰试验方法
GB/T 33175-2016
National fundamental scale maps—1:500 1:1 000 & 1:2 000 orthophoto maps
国家基本比例尺地图 1:500 1:1 000 1:2 000正射影像地图
GB/T 30421-2013
Industrial sewing machines—Safety requirements for sewing machines,units and systems
工业用缝纫机 缝纫机、缝纫单元和缝纫系统的安全要求
GB/T 21104-2007
Identification of Ruminantia derived material (bovidae、caprinae、cervus) in animal - originated feedstuff PCR method
动物源性饲料中反刍动物源性成分(牛、羊、鹿)定性检测方法 PCR方法
GB/T 12566-1990
Interface for signal chain of sound and television broadcasting transmitting equipments
声音和电视广播发射设备信号链接口
GB/T 23718.3-2010
Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3: Requirements for training bodies and the training process
机器状态监测与诊断 人员资格与人员评估的要求 第3部分:对培训机构和培训过程的要求
GB/T 31831-2015
Technical requirements for application of LED indoor lighting
LED室内照明应用技术要求
GB/T 1098-2003
Woodruff keyways
半圆键 键槽的剖面尺寸
GB/T 16098-1995
Workplace air--Determination of acrylonitrile--Direct injection gas chromatographic method
车间空气中丙烯腈的直接进样气相色谱测定方法
GB/T 28909-2012
Extra-high strength structural steel plates in the heat-treatment condition
超高强度结构用热处理钢板
GB/T 23846-2009
Cobalt sulfamate for electroplating
电镀用氨基磺酸钴
GB/T 30269.1-2015
Information technology—Sensor networks—Part 1:Reference architecture and general technical requirements
信息技术 传感器网络 第1部分:参考体系结构和通用技术要求
GB/T 11988-2008
Surface active agents - Technical alkane sulfonates - Determination of mean relative molecular mass and content of the alkane monosulfonate
表面活性剂 工业烷烃磺酸盐 烷烃单磺酸盐平均相对分子质量及含量的测定
GB/T 26879-2011
Grain and oils storage - Technology regulation of heat insulation in warehouse
粮油储藏 平房仓隔热技术规范
GB 18564.1-2006
Road tanker for dangerous liquid goods transportation―Part 1: Technical requirements of atmospheric pressure metal tank
道路运输液体危险货物罐式车辆 第1部分: 金属常压罐体技术要求
GB/T 2930.5-2017
Rules of seed testing for forage, turfgrass and other herbaceous plant—Biochemical test for viability
草种子检验规程 生活力的生物化学(四唑)测定
GB/T 5009.95-2003
Determination of tetracyclines residues in honey
蜂蜜中四环素族抗生素残留量的测定
GB/T 16307-1996
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
计量截尾序贯抽样检验程序及抽样表(适用于标准差已知的情形)
GB/T 6748-2008
Anticorrosive paint for ship
船用防锈漆
GB/T 33854-2017
Networking specification for broadband customer network based on public telecommunication network—PLC networking
基于公用电信网的宽带客户网络联网技术要求 电力线联网
GB/Z 5169.32-2013
Fire hazard testing for electric and electronic products―Part 32: Heat release―Heat release of insulating liquids
电工电子产品着火危险试验 第32部分:热释放 绝缘液体的热释放
GB/T 25151.3-2010
Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade
尿素高压设备制造检验方法 第3部分:尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验
GB/T 32456-2015
General specifications for electromagnetic of induction heating energy-saving systems used for rubber and plastics machines
橡胶塑料机械用电磁加热节能系统通用技术条件
GB/T 18663.1-2008
Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
电子设备机械结构 公制系列和英制系列的试验 第1部分: 机柜、机架、插箱和机箱的气候、机械试验及安全要求
GB/T 13747.7-1992
Zirconium and zirconium alloys--Determination of manganese content--Potassium periodate spectrophotometric method
锆及锆合金化学分析方法 高碘酸盐分光光度法测定锰量
GB/T 29265.306-2012
Information technology - Information device intelligent grouping and resource sharing - Part 306: Quality of service
信息技术 信息设备资源共享协同服务 第306部分:服务质量
GB/T 4781-2006
Commercial road vehicles - 50mm drawbar eye - Interchangeability
道路车辆 50毫米牵引杆挂环的互换性
GB/T 4549.8-2004
Railway vehicle vocabulary--Part8:Water supply and draining equipment
铁道车辆词汇 第8部分:给水、排水装置
GB/T 16529.4-1997
Splices for optical fibres and cables--Part 4:Sectional specification--Mechanical splices for optical fibres and cables
光纤光缆接头 第4部分:分规范 光纤光缆机械式接头
GB/T 24267-2009
Building sealants for fire resistance
建筑用阻燃密封胶
GB/T 35511-2017
Biological requirements and test methods for closures of butyl rubber
丁基橡胶瓶塞生物性能要求与试验方法
GB/T 31714-2015
Technique guide of chemical control for vector—Space spray
病媒生物化学防治技术指南 空间喷雾
GB/T 17505-1998
Steel and steel products--General technicaldelivery requirements
钢及钢产品交货一般技术要求
GB/T 27686-2011
The metal scraps in waste electrical and electronic equipment
电子废弃物中金属废料废件
GB/Z 34935-2017
Technical specifications for oil-immersed smart power transformers
油浸式智能化电力变压器技术规范
GB/T 22443-2008
Oil of rose, Chinese Kushui type
中国苦水玫瑰(精)油
GB/T 882-2008
Clevis pin with head
销轴
GB/T 33889-2017
Nondestructive testing instrument—Specification for eddy current-magnetic flux leakage integrated instrument
无损检测仪器 涡流-漏磁综合检测仪技术规则
GB/T 13545-2014
Fired hollow bricks and blocks
烧结空心砖和空心砌块
GB/T 4622.3-2007
Specification for spiral wound gaskets
缠绕式垫片 技术条件
GB 17501-1998
Specification for marine engineering topographicsurveying
海洋工程地形测量规范
GB/T 25498.1-2010
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration of supra-aural earphones
电声学 人头模拟器和耳模拟器 第1部分:校准压耳式耳机用耳模拟器
GB/T 16824.2-2016
Hexagon flange head tapping screws
六角法兰面自攻螺钉
GB/T 17948.1-2000
Rotating electrical machines--Functional evaluation of insulation systems--Test procedures for wire-wound windings--Thermal evaluation and classification
旋转电机绝缘结构功能性评定 散绕绕组试验规程 热评定与分级
GB/T 7232-2012
Terminology of metal heat treatment
金属热处理工艺 术语
GB/T 24605-2009
Rolling bearings - Marking for products
滚动轴承 产品标志
GB/T 13826-2008
Wet type (non-metallic)friction materials
湿式(非金属类)摩擦材料
GB/T 28016-2011
Gold alloy jewellery - Determination of gold - Gravimetric method
金合金首饰 金含量的测定 重量法
GB/T 14728.1-2006
Walking aids manipulated by both arms―Requirements and test methods―Part 1: Walking frames
双臂操作助行器要求和试验方法 第1部分:框式助行架
GB 17465.2-2009
Appliance couplers for household and similar general purposes - Part 2: Interconnection couplers for household and similar equipment
家用和类似用途器具耦合器 第2部分:家用和类似设备用互连耦合器
GB/T 18392-2001
Norm of integrated circuit(IC) card of certificate of identity code for organizations institutions and enterprises of the People’s Republic of China
中华人民共和国组织机构代码证集成电路(IC)卡技术规范
GB/T 50602-2010
Radiographic testing standard for a single exposure with γ-ray technique of spherical tank installation
球形储罐γ射线全景曝光现场检测标准
GB/T 30540-2014
Document management applications―Achiving of electronic data―Computer output microform (COM)/Computer output laser disc (COLD)
文件管理应用 电子数据的存档 计算机输出缩微品(COM)/计算机输出激光光盘(COLD)
GB/T 25895.2-2010
Water safety signs and beach safety flags - Part2: Specifications for beach safety flags - Colour, shape, meaning and performance
水域安全标志和沙滩安全旗 第2部分:沙滩安全旗颜色、形状、含义及性能的规范
GB/T 32831-2016
Evaluation and test methods for beam quality of high energy laser
高能激光光束质量评价与测试方法
GB/T 21433-2008
Detecting susceptibility to intergranular corrosion in stainless steel pressure vessels
不锈钢压力容器晶间腐蚀敏感性检验
GB 30179-2013
The norm of energy consumption per unit product from coal to synthetic natural gas
煤制天然气单位产品能源消耗限额
GB 20905-2007
Safety requirements for foundry machinery
铸造机械 安全要求
GB/T 3177-2009
Geometrical product specifications (GPS) - Inspection of plain workpiece sizes
产品几何技术规范(GPS) 光滑工件尺寸的检验
GB/T 4661-2002
Rolling bearings--Cylindrical rollers
滚动轴承 圆柱滚子
GB/Z 18039.7-2011
Electromagnetic compatibility - Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
电磁兼容 环境 公用供电系统中的电压暂降、短时中断及其测量统计结果
GB/T 6430-1986
The rule of type designation for crystal holders (enclosures)
晶体盒型号命名方法
GB/T 10267.2-1988
Method for analysis of calcium metal--The determination of micro-amounts of silicon by photometric method
金属钙分析方法 微量硅的光度法测定
GB/T 22780-2008
Liquid crystal displaying quartz watches
液晶式石英手表
GB/T 1303.2-2009
Industrial rigid laminated sheets based on thermosetting for electrical purposes - Part 2: Test methods
电气用热固性树脂工业硬质层压板 第2部分:试验方法
GB 50382-2016
Code for construction quality acceptance of urban rail transit communication engineering
城市轨道交通通信工程质量验收规范
GB/T 30919-2014
Styrene-butadiene rubber, raw―Determination of N-nitrosamines content by gas chromatography―Thermo energy analyzer method
苯乙烯-丁二烯生橡胶 N-亚硝基胺化合物的测定 气相色谱-热能分析法
GB 15146.1-2008
Nuclear criticality safety for fissile materials outside reactors - Part 1: Administrative practices for nuclear criticality safety
反应堆外易裂变材料的核临界安全 第1部分:核临界安全行政管理规定
GB/T 26252-2010
Frequency planning criteria for digital terrestrial television broadcasting in the VHF/UHF bands
VHF/UHF频段地面数字电视广播频率规划准则
GB/T 19672-2005
Specification of pipeline valves
管线阀门 技术条件
GB/T 33461-2016
Specification of extended warranty service for household electrical appliances
家电延保服务规范
GB/T 19289-2003
Methods of measurement of density,resistivity and stacking factor of electrical steel sheet and strip
电工钢片(带)的密度、电阻率和叠装系数的测量方法
GB/T 32119-2015
Covering anticorrosion technology of multilayer petrolatum for marine steel structures
海洋钢铁构筑物复层矿脂包覆防腐蚀技术
GB/T 18798.5-2013
Instant tea—Part 5: Methods for determination of free-flow and compacted bulk densities
固态速溶茶 第5部分: 自由流动和紧密堆积密度的测定
GB 10395.20-2010
Agricultural and forestry machinery - Safety - Part 20:Pick-up balers
农林机械 安全 第20部分:捡拾打捆机
GB/T 15148-2008
Technical specification of power load management system
电力负荷管理系统技术规范
GB 29432-2012
Nomenclature of undersea feature names
海底地名命名
GB/T 20212-2006
Composition of fixing fuse for firecrakers
爆竹用固引剂

Find out:40682Items   |  To Page of: First -Previous-Next -Last  | [13] [14] [15] [16] [17] [18] [19]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved